Products in Fuel Systems: Housings

SABIC's Specialties Business ULTEM™ Resin 1010UCL is an amorphous, transparent polyetherimide (PEI) thermoplastic offering enhanced flow and a glass transition temperature (Tg) of 217°C. 1010UCL offers the same performance as ULTEM 1010 resin and offers further enhanced cleanliness control for (optical) applications. The natural (uncolored) version of this grade is compliant with RoHS and also with Halogen Free standards as IEC 61249-2-21 and e.g. IPC 4101E. For colored versions, compliance needs to be checked case by case.

SABIC's Specialties Business LNP ELCRES EXL9334 is based on Polycarbonate (PC) siloxane copolymer resin. It is a UV stabilized, medium flow opaque material suitable for injection molding (IM) and sheet extrusion applications. This grade offers UL94 V0 @ 1.5mm flame retardancy based on non-bromine, non-chlorine FR systems, extreme low temperature ductility (-40°C) characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. It is available in a wide range of opaque colors and may be an excellent candidate for a wide range of applications.

SABIC's Specialties Business ULTEM™ 1010AR Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C, improved flow and it contains internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS compliant. The material is available in opaque and transparent colors.

SABIC's Specialties Business NORYL™ N190X resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with a UL746C Outdoor Suitability rating of F1. NORYL™ N190X resin offers strong electrical performance, low moisture absorption, dimensional stability, and hydrolytical stability. This material is an excellent candidate for indoor and outdoor electrical enclosure, wall plate / switch, connector, and solar / photovoltaic junction box applications.

SABIC's Specialties Business EXL9330 is an opaque (PC)- siloxane copolymer resin that offers extreme low temperature (-60 C) ductility in combination with excellent processability. This UV stabilized, medium flow resin features UL f1/V-0/5VA rating with non-chlorinated, non-brominated flame retardant agents for wide range of colors. EXL9330 is an excellent candidate for a broad range of applications such as mobile phones, tablets, industrial housings, electric circuit protection, personal safety helmets, electric vehicle supply equipment (EVSE) housings and connectors.

SABIC's Specialties Business LEXAN EXL9134 polycarbonate (PC) siloxane copolymer resin is a UV stabilized high flow opaque injection molding (IM) grade. This resin offers UL94 V0 @ 1.5mm flame retardancy based on non-bromine, non-chlorine FR systems, extreme low temperature ductility (-40 deg C) characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. LEXAN EXL9134 resin is available in a wide range of opaque colors and may be an excellent candidate for a wide range of applications.

SABIC's Specialties Business FXE9330 PC-Siloxane copolymer is a special effects fluorescent with excellent processability and low temperature impact performance. Non-chlorinated, non-brominated flame retardant product in most colors. UV-stabilized. UL rated f1/V-0/5VA.

MOCOM Compounds ALTECH® ECO PA66 2035/500 GF35 is a heat-stabilized polyamide 66 with a filler/additive system of 35% glass fibers containing recycled material. It is suitable for use in automotive and other various market segments, such as cooling systems, chassis, steering, and radiator systems. Typical applications include oil pump parts, housing, automotive trim unpainted, oil pans/sumps, and bearing cages.

MOCOM Compounds ALTECH® ECO PA66 2030/116.01 GF30 is an impact-modified and processing-stabilized polyamide 66 resin with 30% glass fibers and recycled material. It is suitable for applications such as oil pump parts, housings, and automotive trim unpainted, cooling systems, chassis, steering, and impact protection/shock absorbers. For injection molding, the melt temperature should be between 280-300°C and the mold temperature should be between 80-120°C. It is suitable for the automotive market segment and provides excellent mechanical properties.

MOCOM Compounds ALTECH® ECO PA66 2020/116 GF20 IM is an impact-modified, recycled material containing polyamide 66 with 20% glass fibers. It is suitable for a variety of applications including oil pump parts, housing, automotive trim unpainted, cooling systems, filter systems, and transport systems. To ensure optimal results, pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of 0.15%. When processing with injection molding, melt temperature should range between 280-300°C, and mold temperature should range between 80-120°C. This material is suitable for automotive, building and construction, and various other market segments.

MOCOM Compounds ALTECH® ECO PA66 2030/116 GF30 is a polyamide 66 base polymer with 30% glass fibers, impact modified and containing recycled material, specifically designed for automotive and other market segments. It is suitable for applications such as cooling systems, chassis, steering, oil pump parts, housings, automotive trim unpainted, impact protection/shock absorbers, and more. During processing, injection molding should be done with a melt temperature of 280-300°C and a mold temperature of 80-120°C.

MOCOM Compounds ALTECH® PA6 A 2015/507 GF15 is a pre-dried polyamide 6 material with a glass fiber and lubricant additive system. It is UV stabilized, nucleated, impact modified, and easy to release (demolding). Its melt temperatures range from 270-290°C while the mold temperatures should be between 80-100°C. The maximum moisture content should not exceed 0.15%. Typical applications for this material include oil pump parts, bearings and sliding elements, engine covers, functional components, and housings. It is suitable for use in the automotive, building and construction industries.

MOCOM Compounds ALTECH® PA6 A 2030/606 GF30 is a polyamide 6-based material with 30% glass fibers that is nucleated and processing-stabilized for easy release (demolding). It is suitable for injection molding applications with a melt temperature of 270-290°C and a mold temperature of 80-100°C. This material is primarily used in the automotive market for cooling system, engine and drive system components, such as oil pump parts, housings, and functional components.

MOCOM Compounds ALTECH® PA6 A 2015/327 is a polyamide 6 reinforced with 15% glass fibers that has been UV stabilized and impact modified for easy demolding. This product is commonly used in the automotive, building, and construction markets for applications such as cooling systems, fuel systems, gear wheels, roller bearings, and injection molded parts. It is typically used for oil pump parts, bearings, sliding elements, engine covers, and housings.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2300N is a melt-processable copolymer of tetrafluoroethylene and ethylene. It offers a unique combination of properties such as enhanced resistance to heat and chemical attack, and exceptional physical toughness. Rotational molding and lining grades are formulated as free-flowing powders with specific particle morphologies to uniformly coat complex and challenging parts. It is used in rotational lining of components in the Chemical Process Industry (CPI) for fluid handling such as valves, pumps, pipes, fittings, tanks, and other intricate parts.

AGC Chemicals Americas, Inc. Fluon® PFA P-62XP (perfluoroalkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA P-62XP has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional extrusion, injection molding, blow molding, and transfer molding techniques. This unique material can be used over a wide range of temperatures (-200°C to 260°C). It is available as a 1/8 inch pellet.

AGC Chemicals Americas, Inc. Fluon® PFA P-65P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for general-purpose extrusion and injection molding and offers better stress crack resistance compared to P-63P.

AGC Chemicals Americas, Inc. Fluon® PFA P-66P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for extrusion, transfer, compression, and injection molding, and offers the best resistance to stress cracking among the PFA materials.

AGC Chemicals Americas, Inc. Fluon® PFA P-63P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used in general purpose extrusion and injection molding.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-730A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-730A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-720A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-720A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has better stress crack resistance compared to LM-730A.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-740A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-740A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has a higher flow rate than LM-730A.

ECP 9905 is Conductive Glass Fiber Filled Polyphenylene Sulfide Carbon Nanotube Compound Injection Molding proprietary TBA ECP injection molding compound utilizing multi wall carbon nanotube technology to give a permanently conductive material. Special compounding techniques at low filler loadings ensure the retention of physical properties and excellent cleanliness. ECP 9905 is a very high performance thermoplastic with a very high modulus and strength plus a very high continuous service temperature (240°C, short term exposure up to 270°C). It is inherently flame retardant (UL 94 V0), has very good chemical and oxidation resistance, very low water absorption and very low creep, even at elevated temperatures.

ECP 9906 is Conductive Glass Fiber Filled Polyphenylene Sulfide Carbon Nanotube Compound Injection Molding proprietary TBA ECP injection molding compound utilizing multi wall carbon nanotube technology to give a permanently conductive material. Special compounding techniques at low filler loadings ensure the retention of physical properties and excellent cleanliness. ECP 9906 is a very high performance thermoplastic with a very high modulus and strength plus a very high continuous service temperature (240°C, short term exposure up to 270°C). It is inherently flame retardant (UL 94 V0), has very good chemical and oxidation resistance, very low water absorption and very low creep, even at elevated temperatures.

PPS, cross-linked, GF 40, with improved hydrolysis resistance for applications in the automotive engine compartment.

Neoplast™ 167 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Pentamid A GV25 H black is a normal viscosity, heat stabilized polyamide 66, 25% glass fiber reinforced.

Pentamid AHT GV30 H MOS non-colored is a normal viscosity, heat stabilized polyamide 4.6,easy flow, 30% glass fiber reinforced, modified with mos2.

Pentamid A GV50 H natural is a normal viscosity, heat stabilized polyamide 66, 50% glass fiber reinforced.

Pentamid AB S GV50 H natural is a low viscosity, heat stabilized polyamide 66+6, 50% glass fiber reinforced.

Pentamid A GV15 MK15 H black is a normal viscosity, heat stabilized polyamide 66, 15% glass fiber and 15% mineral filled.

PENTAC Polymer GmbH Pentamid™ B GV10 GK20 H LS black is a normal viscosity, heat stabilized polyamide 6, 10% glass fiber and 20% glass bead reinforced, laser markable.

Neoplast™ 155 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

PPS based, thermally conducting, electrically insulating grade with improved processability.

Thermally conductive Nylon 6,6.

Pentamid AHT GV30 H TF15 natural is a normal viscosity, heat stabilized polyamide 4.6, 30% glass fiber reinforced, ptfe modified.