Products in Other Automotive Applications

NBR 3375 NT is essentially an acrylonitrile (31-35%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium content of acrylonitrile, heightened oil resistance.

Adell Plastics, Inc. Adell™ Polyamide AR-37 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in North America.Typical application of Adell Polyamide AR-37: Automotive

MicroFLON S-Series powders are Natural Prime PTFE micronized to various particle sizes. In thermoplastics and elastomers, MicroFLON® S facilitates lubrication and wear resistance. The tight process and particle size control typical of the MicroFLON® product line allows for easy dispersion, and distribution of the product.

Adell Plastics, Inc. Adell™ PP RR-14 is a Polypropylene Copolymer (PP Copolymer) material filled with 20% glass fiber. It is available in North America.Important attributes of Adell PP RR-14 are: Flame Rated Copolymer

Very high flow SAN copolymer. Typical applications: Used as base resin in color concentrates. Suitable for blending purposes. Major benefits: Improved flow ability for ABS grades. Excellent balance of mechanical properties, process ability and esthetics. Easy dispersion for pigments & colorants.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

High Strength Silicone Rubber are formulated to have higher elongation and tear strength than the General Purpose. They can be used for molding, extrusion and calendering. Colors will match your requirement.

BRUGGOLEN® TP-H1802 is a mixture of secondary aromatic amine-based antioxidants and co-stabilizers in powder form. It provides protection of polyamides against hot oils, fats, and glycols and has the following features: Good long-term stabilization Characteristic brownish-translucent discoloration Not CMR classified, free of DPPD

Adell Polyamide BS-30 is a Polyamide 6 (Nylon 6) material. It is available in North America.Typical application of Adell Polyamide BS-30: Automotive

Adell Plastics, Inc. Adell™ Polyamide AJ-13 is a Polyamide 66 (Nylon 66) material filled with 13% glass fiber. It is available in North America.Important attributes of Adell Polyamide AJ-13 are: Flame Rated Impact Resistant

GLAMIDE® T-656E is a Polyamide 66 (Nylon 66) product. It is available in North America.Characteristics include: Flame Rated Wear Resistant

Adell Plastics, Inc. Adell™ Polyamide AI-10 is a Polyamide 66 (Nylon 66) material. It is available in North America.Important attributes of Adell Polyamide AI-10 are: Flame Rated Impact Modified Typical application of Adell Polyamide AI-10: Automotive

Adell Polyamide AR-13 is a Polyamide 66 (Nylon 66) material filled with 13% glass fiber. It is available in North America.

Adell Plastics, Inc. Adell™ Polyamide AW-37 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in North America.Important attributes of Adell Polyamide AW-37 are: Flame Rated Good Esthetics

Adell Plastics, Inc. Adell™ Polyamide AH-18 is a Polyamide 66 (Nylon 66) material filled with 40% mineral. It is available in North America. Primary attribute of Adell Polyamide AH-18: Flame Rated.

Adell PC DR-16 is a Polycarbonate (PC) material filled with 30% glass fiber. It is available in North America.

Adell Plastics, Inc. Adell™ Polyamide AL-18 is a Polyamide 66 (Nylon 66) material filled with 40% glass\mineral. It is available in North America. Primary attribute of Adell Polyamide AL-18: Flame Rated.

Adell Plastics, Inc. Adell™ Polyamide BR-18 is a Polyamide 6 (Nylon 6) material filled with 40% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-18: Flame Rated.

BRUGGOLEN® H164 is a synergistic mixture of sterically hindered phenolic antioxidants and phosphonates in powder form. Our phenol-based stabilizer BRUGGOLEN® H164 is reaching a long-term protection of polyamides against heat aging for technical applications such as:Non-discoloringExcellent in glass fiber reinforced or mineral-filled polyamides

Adell Plastics, Inc. Adell™ Polyamide BJ-37 Glass Reinforced High Impact Glass Reinforced High Impact is a Polyamide 6 (Nylon 6) material filled with glass fiber. It is available in North America. Primary attribute of Adell Polyamide BJ-37 Glass Reinforced High Impact: Impact Resistant.

EZ Series is a new class of formaldehyde free, high performance fluorescent pigment. Ezentus colorants are made with user-friendly materials that eliminate chemicals of concern without compromising performance. These versatile pigments can be used where traditional fluorescent colorants cannot. Whether it's for an ink or coatings application, where solvent resistance is needed or even compounding an EVA foam or a flexible PVC application, Ezentus will perform where other fluorescent pigments fail. EZ Series offers formulators a migration free product as well as one with improved lightfastness.

High flow SAN copolymer. Typical applications: Used as base resin in color concentrates. Can be blended with High Rubber Modifiers (ELIXTM 100 series) to manufacture or modify properties profile of ABS resin and blends containing Polycarbonate. Major benefits: Improved flow ability for ABS grades. Excellent balance of mechanical properties, process ability and esthetics. Easy dispersion for pigments & colorants.

High impact strength, high gloss, low emission. Applications: Center console, door components, instrument panel parts.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Adell Plastics, Inc. Adell™ PP RZ-14 is a Polypropylene Copolymer (PP Copolymer) material filled with 20% calcium carbonate. It is available in North America.Important attributes of Adell PP RZ-14 are: Flame Rated Copolymer

Copolymer PP, high fluidity. For SDS, please contact Addiplast Group using the 'Request Document' button.

Adell Polyamide AR-17 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in North America.

EZ Series is a new class of formaldehyde free, high performance fluorescent pigment. Ezentus colorants are made with user-friendly materials that eliminate chemicals of concern without compromising performance. These versatile pigments can be used where traditional fluorescent colorants cannot. Whether it's for an ink or coatings application, where solvent resistance is needed or even compounding an EVA foam or a flexible PVC application, Ezentus will perform where other fluorescent pigments fail. EZ Series offers formulators a migration free product as well as one with improved lightfastness.

Adell Plastics, Inc. Adell™ Polyamide BJ-17 Glass Reinforced High Impact Glass Reinforced High Impact is a Polyamide 6 (Nylon 6) material filled with glass fiber. It is available in North America. Primary attribute of Adell Polyamide BJ-17 Glass Reinforced High Impact: Impact Resistant.

High rubber content Acrylonitrile Butadiene Styrene modifier used to improve toughness of engineering thermoplastics & PVC. Typical applications: Provides superior impact strength performance at room & low temperature for blends containing Polycarbonate, Polyesters (PBT, PET) and copolymer SAN. Highly effective modifier for improving impact strength, elongation at break and process ability for opaque PVC compounds used for indoor profiles, semi-rigid sheets, decorative films, molded parts. Useful additive to improve mechanical properties of recycle ABS, SAN and ABS+PC.

Adell Plastics, Inc. Adell™ PP ER-38 is a Polypropylene Homopolymer (PP Homopolymer) material filled with 40% glass fiber. It is available in North America.Important attributes of Adell PP ER-38 are: Flame Rated Homopolymer Typical application of Adell PP ER-38: Automotive

Adell Plastics, Inc. Adell™ PP EA-14 is a Polypropylene Homopolymer (PP Homopolymer) material filled with 20% talc. It is available in North America. Primary attribute of Adell PP EA-14: Homopolymer.

Adell Plastics, Inc. Adell™ PP RR-18 is a Polypropylene Copolymer (PP Copolymer) material filled with 40% glass fiber. It is available in North America.Important attributes of Adell PP RR-18 are: Flame Rated Copolymer

Adell Plastics, Inc. Adell™ Polyamide BH-38 is a Polyamide 6 (Nylon 6) material filled with 40% mineral. It is available in North America.Typical application of Adell Polyamide BH-38: Automotive

Adell Plastics, Inc. Adell™ Polyamide BR-17 is a Polyamide 6 (Nylon 6) material filled with 33% glass fiber. It is available in North America. Primary attribute of Adell Polyamide BR-17: Flame Rated.

BRUGGOLEN® H3386 is a mixture of copper-complex-based antioxidants and synergists. It is used for the retention of natural polyamide color after conditioning. This product is particularly suitable for the stabilization of polyamides against thermal aging, chemical attack, or aggressive weathering conditions. Powerful long-term stabilization/ natural colors Excellent UV stabilization Very effective dispersion