Products in Body Shop & Repair

T-Mulz® Z 900 is a modified aliphatic amine and a clear to light yellow-colored, low-viscosity epoxy curing additive. The incorporation of T-Mulz® Z 900 into epoxy systems allows for less critical mix ratios and excellent solvent resistance. It can be used across a wide range of applications, including tooling compounds, laminates, automotive body patching compounds, and metal and plastic adhesives.

Vertal® 92 is an off-white, extremely platy talc. This product is primarily used as a functional mineral pigment in auto body compounds, caulks, putties, and sealants. Vertal® 92 can be used as a cost-effective reinforcing agent or a dusting/parting agent.

Vertal® 97 is an off-white, extremely platy talc. This product is primarily used as a functional mineral pigment in auto body compounds, caulks, putties, and sealants. Vertal® 97 can be used as a cost-effective reinforcing agent or a dusting/parting agent.

Magris Talc Grade C85 is a talc/magnesite with a highly lamellar structure. Grade C-85 is used as a functional ingredient in auto body compounds to improve viscosity, smoothness, and sandability. Grade C-85 is also used to reinforce polypropylene, as a friction modifier in brake linings, and as an insecticide carrier.

EPOXIBOND™ EB-107LP-1 is a two component, room temperature curing epoxy featuring very low viscosity, and excellent optical-mechanical properties.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

USP-EAGLE (BF40-68) is a pre-accelerated Unsaturated Polyester resin with high flexibility, medium reactivity.it is used as standard & light weight body filler for cars.

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

USP-EAGLE (BF36-62) is Unsaturated Polyester resin with high hardness, high reactivity, good wetability, fast drying and early sandability.it is used in standard &Light weight body filler for cars.

Epic Resins Epic S7428 is a two component urethane paste which is designed to be used for automotive body repair. S7428 features a convenient 1:1 volumetric ratio with a light paste consistency for easy workability. S7428 has been tested and meets ROHS requirements. This material adheres to PVC with a bond so strong the PVC breaks before the adhesive bond.

Epic Resins Epic S7045 is a two component, extremely fast-curing epoxy adhesive. The 1 to 1 mix ratio, rapid cure and good adhesion offered by this epoxy resin adhesive system make it ideal for many applications. This epoxy adhesive is particularly useful for field repairs. Epic S7045 adhesive is recommended for any application requiring bonding of wood, metal, plastics and/or concrete.

BAM 208 WSX-55 is a medium oil alkyd resin based on soybean oil fatty acid which offers very good hardness, surface and deep drying and adhesion and excellent gloss and gloss retention.

BAM 212 X-60 is a medium oil alkyd resin based on soybean oil fatty acid which offers excellent hardness, surface and deep drying and gloss and gloss retention.

Demeter Technologies Aluminum Oxide YL-12 is a high purity fine polish aluminum oxide powders for a variety of surface correction formulations.

Demeter Technologies Aluminum Oxide YL-4 is a high purity high cut aluminum oxide powders for a variety of surface correction formulations.

RECKLI Epoxy GF Filler is a pasty, glass fiber reinforced, solvent-free twocomponent epoxy resin with high impact resistance as well as compressive- and flexural strength. It is almost shrinkage-free and insensitive to moisture, thus being applicable on slightly humid surfaces. The addition of further filling material is not recommended.

Gasocut Foam 192 is composed of modified mineral oil, polyether, special silicone oil, emulsifier and other ingredients Composed of defoamer, it has long-term sustained defoaming ability, specially designed for high pvc and medium to high viscosity Waterborne paint body design.

FS-4100 2K High Build Primer has exceptionally high build properties. Easy sanding wet or dry after short dry times. FS-4100 Primer provides minimal shrinkage and maximum color holdout properties. FS-4100 can be used as a 2K sealer with additional reduction.

K-Bond Polyester White Paste is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.

K-Bond Acrylic Ultra Penetrating is a premium quality acrylic adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed. Uses include bonding, laminating, installation of pieces and repairs.

K-Bond Polyester Transparent Paste is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.

C-POXY 30 is a general purpose, structural, unfilled, fast-setting epoxy adhesive. Recommended for bonding metal, ceramics, stone, glass, concrete, wood, fiberglass and many plastics such as polyester, ABS and rigid PVC (not suitable for PTFE-PP-PE and rubbers).

Click Bond CB96 - CB440 Sealant Kit provides all materials necessary to mix and apply 5.0g of CB440 (MIL-S-8802 compliant) sealant. Ideal for small jobs or repairs or for installation of 3-4 Click Bond adhesive-bonded fasteners.

C-POXY 15 is a general-purpose, unfilled, fast-setting epoxy adhesive. Recommended for bonding metal, ceramics, stone, glass, concrete, wood, fiberglass and many plastics such as polyester, ABS and rigid PVC (not suitable for PTFE-PP-PE and rubbers).

K-Bond Polyester Buff Paste is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.

Manus-Bond 75AM Fast Cure (N33-1) is an environmentally friendly, VOC compliant, moisture curing hybrid elastomeric adhesive/sealant. 75AM Fast Cure (N33-1) is designed for primerless adhesion to most common trailer and construction assembly substrates. This product is fast cure, high strength and remains flexible in low temperature extremes. 75AM Fast Cure (N33-1) does not contain solvents or isocyanates. The ease of one-part makes 75AM Fast Cure (N33-1) the perfect choice for both manufacturing and repair.

Ziegler & Co. Naturprodukte Perlite Microspheres is the multicellular, closed hollow spheres are produced from a volcanic raw material which is formed to a white, intert material with high volume by a special expansion process.

Demeter Technologies Aluminum Oxide YL-5 is a high purity high cut aluminum oxide powders for a variety of surface correction formulations.

Demeter Technologies Aluminum Oxide YL-7 is a high purity high cut aluminum oxide powders for a variety of surface correction formulations.

Demeter Technologies Aluminum Oxide YL-2 is a high purity rapid cut/good finish aluminum oxide powders for a variety of surface correction formulations.

K Bond Vivid Knife Grade is a premium quality, low color Vinyl Ester stone adhesive. K-Bond VIVID is a corrosion-resistant, ultra-fast curing, high adhesion adhesive. For use with natural stone, quartz, ceramics, porcelains and dense surfacing material. Perfect for application with light or white substrates. Uses include bonding, laminating, miters, installation of pieces, and repairs.

Demeter Technologies Aluminum Oxide YL-19 is a high purity rapid cut/good finish aluminum oxide powders for a variety of surface correction formulations.

K-Bond Polyester Buff Flowing is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.