Products in Bonding & Assembly: Resin

NYCOBOND XN-287 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a significantly lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

NYCOBOND XN-187 is a flexible Nylon terpolymer suitable for extrusion and injection molding applications. It has a lower melting point than traditional Nylons, excellent processability, and yields extremely tough and resilient finished articles.

Very high impact grade, also at low temperatures, high strength along weld lines ISO 9988-1: POM-K, M-GNPR, 01-001

Nylene Unreinforced nylon 6/6 molding resin Has the high heat and chemical resistance characteristic of nylon 6/6 materials, combined with high flow and easy molding Suitable for a variety of applications, such as clips, fasteners, levers, bushings, and other uses where heat, chemical, and wear resistance are required

PBT-GF20 FR, PBT, 20% glass fiber reinforced, flame retardant, hydrolysis stabilized

PBT unreinforced, injection molding type, low viscosity

BARLOG plastics GmbH Kebaform® / C 901 TS is a specially modified type, which is characterized by excellent sliding and wear properties. Despite the highly efficient modification with PTFE and a special silicone oil, Kebaform® / C 901TS has excellent mechanical properties. Kebaform® / C 901TS is used wherever high demands are placed on wear resistance, uniformity of friction behavior under changing conditions and low noise levels, and at the same time the mechanical property profile of a technical construction material is required. Kebaform® / 901TS is particularly suitable for sliding pairings with changing operating conditions, e.g. B. When starting behavior without stick-slip effect is just as required as high wear resistance over the entire service life.

Engineering Grade Nylon Resin (PA66)

Kocetal UR304 is impact strength modified grade suitable for fasteners and switches.

PBT-M40, PBT, 40% mineral

Grade with increased impact strength ISO 9988-1: POM-K, M-GNPR, 03-001

Kocetal EL302 is impact strength modified grade suitable for fasteners and switches.

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

Nylene Duratel MF3 is a high-viscosity acetal co-polymer. Duratel MF3 has slightly higher toughness than standard MF9, and parts molded with MF3 should have thicker wall sections and shorter flow lengths to accommodate the higher viscosity. MF3 is suitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.

PBT unreinforced, injection molding type, also suitable for extrusion, highly viscous

Shakespeare® terpolymer series are linear polyamide grades with unique solubility characteristics and physical properties. They are compatible with other nylons and are ideal nylon carrier resins for color and functional additives requiring excellent dispersion and high loading. The resins offer improved adhesion to glass and metal surfaces. Selected grades are soluble in alcohol and can be applied by solution coating techniques.

PBT-GF15 FR, PBT, 15% glass fiber reinforced, flame retardant

CP-Polymer Technik Wellamid® 22LN2-N is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® 22LN2-N: Flame Rated.Typical application of Wellamid® 22LN2-N: Automotive

Shakespeare® terpolymer series are linear polyamide grades with unique solubility characteristics and physical properties. They are compatible with other nylons and are ideal nylon carrier resins for color and functional additives requiring excellent dispersion and high loading. The resins offer improved adhesion to glass and metal surfaces. Selected grades are soluble in alcohol and can be applied by solution coating techniques.

Nylene Low wear 43% glass fiber reinforced nylon 6/6 Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue

PBT unreinforced, flame retardant

Kolon Industries Kocetal® UR304LOBK is an Acetal (POM) Copolymer product. It is available in Asia Pacific, Europe, Latin America, or North America. Applications of Kocetal® UR304LOBK include electrical/electronic applications and engineering/industrial parts. Characteristics includes flame rated, RoHS compliant, impact modified and low to no odor/taste.

PBT-GF15, PBT, 15% glass fiber reinforced

PBT unreinforced, highly impact modified

CP-Polymer Technik Wellamid® GFT13-66 XE-N is a Polyamide 66 (Nylon 66) material filled with 13% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® GFT13-66 XE-N: Impact Modified.Typical application of Wellamid® GFT13-66 XE-N: Automotive

BARLOG plastics GmbH Kebaform® / C 904 UR is a normal viscous, elastomer-containing injection molding grade based on Kebaform® / C 90.0. The increased elastomer content results in a very high level of toughness. The absorption capacity for high dynamic loads is excellent. Fields of application are e.g. The outsert technology, rollers, belt buckles, transport chains, fastening elements, etc.

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing

Nylene Duratel MF9 is an unreinforced general purpose acetal co-polymer. Duratel MF9 has the high creep resistance, wear resistance, and outstanding chemical resistance inherent in acetal resins. MF9 issuitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

PBT + PCT, unreinforced, increased heat resistance, impact modified

Impact Modified Nylon Resin (PA66)

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

LOXIAMID PA6 HS1 IM3 03039 is an injection molding grade of Polyamide 6 resin with excellent impact resistance.

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant, halogen free

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

PA 66 basic type