Products in Rail & Mass Transit Coatings

Technicure® IPDU-8, N-3-(dimethylamino) carbonylaminomethyl-3,5,5-trimethylcyclohexyl-N,N-dimethyl-urea, is a substituted urea. It is used as a dicyandiamide (DICY) accelerator in one-component epoxy resin based formulations. Typically the product is used with epoxy resin and dicyandiamide between 1-3 phr. The loading level of an accelerator will provide balance of low temperature reactivity and formulation shelf stability. Among all substituted ureas as DICY cure accelerators, IPDU-8 offers the most latency.

CHS-EPOXY 171 is a Low molecular weight "1,5 - type" epoxy resin.

Avox® 380 PS is an aromatic highly functional polyester polyol. This material is made from recycled and renewable resources.

A daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

An ultra high-strength daylight fluorescent pigment for thinfilm solvent-based applications such as gravure and screen process inks. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

Kraton D1113 K is a clear, linear block copolymer based on styrene and isoprene with a polystyrene content of 16%. It is supplied from North America in the physical form identified below. D1113 KT - supplied as a dusted pellet Kraton D1113 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

T UV Blue 70 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Kraton D1116 A is a clear, radial triblock copolymer based on styrene and butadiene with a polystyrene content of 23%. It is supplied from Europe in the physical form identified below. Kraton D1116 AT - supplied as a porous pellet dusted with talc Kraton D1116 ASM - supplied as a powder dusted with silica Kraton D1116 A IM - supplied as a powder dusted with inorganic dusting agents for supply to the North American market Kraton D1116 A is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Transparent Iron Oxide Pigment

ZincGard® 1500 is a rapid recoat primer that provides excellent corrosion protection and undercutting protection. Excellent for use in industrial, coastal, marine and freshwater environments. May be used on structural steel, steel tanks, offshore platforms, barges refineries, petrochemical plants, power plants, railcars, pulp & paper mills and other areas as recommended. May also be used to field touch-up inorganic zinc and/or provide galvanic protection for properly prepared steel substrates.

EpoxyGrip® 2900 is used as a rapid recoat high build primer to provide excellent corrosion protection for steel substrates. Designed to be used in interior and exterior heavy-duty service in corrosive, industrial atmospheres. Excellent for use on structural steel, steel tanks, barges, refineries, petrochemical plants, power plants, railcars, pulp & paper mills and others as recommended. Used as a shop primer for OEM applications.

CHS-EPOXY 141 is a Low molecular weight "2,5 - type" epoxy resin.

Flowing agent for powder coatings Lu'An Jietonda New Material SA88 is a flow agent which can be used for any powder coating system such as EP.PES/EP hybrid ,PES/TGIC.PES/Primid and PU etc .

Araldite® GT 6084 is an unmodified solid epoxy resin based on Bisphenol A.

Resicure® D-5 is a pulverized grade of dicyamdiamide with an average particle size of about 5 micron. The products contains fumed silica to prevent clumping and improve flow. Typically the product is used with epoxy resin between 3-8 phr. Technicure® D-5 reacts with epoxy resin at temperatures higher than 170°C unless an accelerator is used. Suggested accelerators include Technicure® LC-80, Technicure® LC-100 and substituted ureas such as Technicure® MDU-11M, Technicure® PDU-250M and Technicure® TDU-200M. The type and loading level of an accelerator will provide excellent balance of low temperature reactivity and formulation shelf stability.

Defoamer and deaerator for water-based coating systems, silicone free. BLISTER FREE 55 has an excellent defoaming effect in all types of water-based alkyd systems, for instance in alkyd emulsions with and without co-solvents. There are also very good defoaming effects in modified alkyds and alkyd/acrylic hybrids.

Lu'An Jietonda New Material K7318 is a Low temperature curing accelerator for powder coatings.Jietonda® K7318 is a new anti-yellowing low temperature curing accelerator,designed for powder coatings based on PES/TGIC and hybrid, to reduce curing temperature or shorten curing time.

CHS-EPOXY 112 4F0,5 is a Modified by 0,5% of flow control agent.

Kraton D1124 K is a clear, radial triblock copolymer based on styrene and isoprene, with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton D1124 KU - supplied as an undusted porous pellet Kraton D1124 K is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kukdo Chemical KD-174X90 is high Solid Epoxy Resin.

CHS-EPOXY 141 4F5 is a Modified by 5% of flow control agent.

Lu'An Jietonda New Material SA316 is a Curing accelerator for powder coatings.Jietonda® SA316 is a special quaternary ammonium compound that can be used as curing accelerator for powder coatings based on Epoxy, Epoxy/Polyester hybrid and Polyester/TGIC to improve curing performance. It may also be used as internal catalyst for carboxyl terminated polyester resin to provide lower cure temperature or shorter baking time.

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene bound styrene of 31% mass. 

Polymac® 5650 is a catalyst-free, carboxy-functional polyester resin designed to cure using TGIC at a 93:7 TGIC ratio. The resulting films using this resin system are characterized by high gloss, excellent hardness, excellent flexibility and color retention, and good exterior durability.

Jietonda® SA580 is a glycidyl containing solid acrylic resin designed for applying in exterior durable carboxyl functional polyester powder coatings to provide low gloss of max. 10%(60°) and excellent weather-resistance.

Kraton D1155 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Europe in the physical form identified below. Kraton D1155 ES - supplied as porous pellets dusted with amorphous silica Kraton D1155 E is used in the modification of polymers and in compounds for technical and footwear applications. It is also used in formulating adhesives, sealants and coatings and as a modifier for bitumen.

ZincGard® 1500 VOC is a rapid recoat primer that provides excellent corrosion protection and undercutting protection. Excellent for use in industrial, coastal, marine and freshwater environments. May be used on structural steel, steel tanks, offshore platforms, barges refineries, petrochemical plants, power plants, railcars, pulp & paper mills and other areas as recommended. May also be used to field touch-up inorganic zinc and/or provide galvanic protection for properly prepared steel substrates.

Ply-Guard AS (0 VOC) is a fast-curing, two-component polyaspartic (aliphatic polyurea) coating system. Ply-Guard AS (0 VOC) exhibits superior color and gloss retention, excellent abrasion resistance, good flexibility, and can be applied directly to properly prepared concrete or metal surfaces. In addition, Ply-Guard AS (0 VOC) has very good corrosion, chemical, and UV resistance, and can achieve a uniform coating thickness of 2-8 mils DFT per coat that is free of bubbles and pinholes.

VOXCO PIGMENT YELLOW 17 GG is suitable for use in Powder Coating

Razeen® SR 5174 is a solid, Bisphenol A epoxy resin modified with 5% flow modifier.

Razeen® SR 5013 is a solid, unmodified Bisphenol A epoxy resin.

SILLIKOLLOID P 87 puriss is a finest particle size distribution with good color neutrality.

APOND® AAV-1229 has Excellent Workability, Flexibility and Water Resistance. It is a Milky-white Liquid.