Products in Automotive & Transportation: Tubing

Aegis® H95ZI resin is a medium viscosity, nylon 6 extrusion grade homopolymer for high-strength monofilament and multifilament applications with typical filament tenacities of 5.0-9.0 gpd

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

Aegis® H100NP resin is a medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Stanyl® TW363 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. Suitable processing technologies for the product are extrusion and injection molding. Special features include heat stabilization.

Arnitel® UM551 is a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries ranging from automotive to E&E, Arnitel® UM551 is gaining prominence as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. However, it's important to note that due to its limited hydrolysis resistance, this material is suitable for use only in dry environments. Arnitel® UM551 can be processed using both extrusion and injection molding technologies, offering versatility for various applications.

Akulon® F136-DH is a polyamide 6 (PA 6) that functions as a resin with distinctive features, including being lightweight, nucleated, and UL flame-rated. It is applied in various industries and markets, including automotive and transportation, electrical and electronics, and industrial sectors.

Arnitel® CM622, a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high-temperature resistance, strength, and outstanding processing attributes. In industries spanning automotive to E&E, it serves as a lighter, more intelligent, and eco-friendly replacement for traditional rubbers, effectively lowering environmental impact and system costs. Processed through extrusion and injection molding techniques, it features a hardness of 60 Shore D, primarily ideal for extrusion applications.

Arnitel® UM552 is a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries ranging from automotive to E&E, Arnitel® UM552 is gaining prominence as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. It's important to note that due to its limited hydrolysis resistance, this material is suitable for use only in dry environments. Arnitel® UM552 can be processed using both extrusion and injection molding technologies, offering versatility for various applications.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2300N is a melt-processable copolymer of tetrafluoroethylene and ethylene. It offers a unique combination of properties such as enhanced resistance to heat and chemical attack, and exceptional physical toughness. Rotational molding and lining grades are formulated as free-flowing powders with specific particle morphologies to uniformly coat complex and challenging parts. It is used in rotational lining of components in the Chemical Process Industry (CPI) for fluid handling such as valves, pumps, pipes, fittings, tanks, and other intricate parts.

AGC Chemicals Americas, Inc. Fluon® PTFE CD086E is a white free-flowing powder made by coagulating an aqueous dispersion of polytetrafluoroethylene. This polymer has a trace quantity of comonomer incorporated in the molecule to modify its crystallinity and the resulting properties. The process of making Fluon® PTFE CD086E does not use ammonium salts of perfluorooctanoic acid (PFOA).

AGC Chemicals Americas, Inc. Fluon® PFA P-65P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for general-purpose extrusion and injection molding and offers better stress crack resistance compared to P-63P.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-730A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-730A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications.

AGC Chemicals Americas, Inc. Fluon® PTFE CD141E is a white, free-flowing powder made by coagulating an aqueous dispersion of polytetrafluoroethylene. The homopolymer CD141E has a medium molecular weight and is not produced using perfluorooctanoic acid ammonium salts (PFOA). This product has been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires.

AGC Chemicals Americas, Inc. Fluon® PFA P-62XP (perfluoroalkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA P-62XP has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional extrusion, injection molding, blow molding, and transfer molding techniques. This unique material can be used over a wide range of temperatures (-200°C to 260°C). It is available as a 1/8 inch pellet.

AGC Chemicals Americas, Inc. Fluon® PFA P-66P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for extrusion, transfer, compression, and injection molding, and offers the best resistance to stress cracking among the PFA materials.

AGC Chemicals Americas, Inc. Fluon® ETFE C88AXMP-HT is a high-performance melt-processable copolymer of tetrafluoroethylene and ethylene that is designed for use in automotive applications. It offers improved thermal stability and performs better at higher temperatures than standard ETFE, with a maximum operating temperature of 200ºC. Its enhanced stress crack resistance, abrasion resistance, and mechanical strength make it suitable for ultra-thin layer insulation in vehicles and aircraft where reducing carbon footprint and increasing fuel efficiency is important.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® PFA P-63P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used in general purpose extrusion and injection molding.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE LH-8000 is a new addition to the LM-ETFE AH Series. This ETFE (tetrafluoroethylene-ethylene copolymer) has a functional group polymerized directly in to the chain backbone, allowing it to adhere to other materials. This resin is ideal for producing multi-layer structures in a one-step process without the need for surface treatment or a separate adhesive layer. LH-8000 offers the lowest melting point of all the AH series resins, yet with the same desirable properties of other ETFEs, including non-stick, excellent processability, and superior chemical resistance.

AGC Chemicals Americas, Inc. Fluon® ETFE AH-3000L is a semiconductive, modified copolymer of ethylene and tetrafluoroethylene. It is used in applications where superior stress-cracking properties and strong adhesion to polyamide polymers, especially nylon 12, are required. This product also exhibits high permeation resistance to many fluids and gasses, especially automotive fuels. It is processed using conventional melt extrusion methods and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon+™ PFA EA-2000 is a perfluoro resin which has been functionalized to include an adhesive group within the polymer backbone. The perfluoro backbone gives the material excellent electrical characteristics, and heat and chemical resistance, while the adhesive functionality facilitates adhesion to other materials in a one-step process, without the need for surface treatment or a separate adhesive layer. Example materials include glass cloth, polyimide, or various metals. This grade is semi-commercialized and may be available upon request. This material is supplied as pellets and packaged in 25kg plastic bags.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-740A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-740A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has a higher flow rate than LM-730A.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-720A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-720A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications. Additionally, it has better stress crack resistance compared to LM-730A.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® HR-907 Heat Resistant LM-ETFE is a specially designed low-flow, low-melting copolymer of ethylene and tetrafluoroethylene. It delivers superior thermal stability when compared to standard ETFE materials. This product can be processed using conventional thermoplastics techniques such as extrusion and injection molding and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon® HR-930 Heat Resistant LM-ETFE is a specially designed high-flow, low-melting copolymer of ethylene and tetrafluoroethylene. It delivers superior thermal stability when compared to standard ETFE materials. This product can be processed using conventional thermoplastics techniques such as extrusion and injection molding and is available as a 1/8” pellet.

76 Durometer - Black Viton B O-Ring Cord

Easy Splice 0.75″ +/- 0.039″ (19.1 +/- 1.04 MM) – 55 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

76 Durometer - Black Viton B O-Ring Cord

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Easy Splice 0.551″ +/- 0.026″ (14 +/- 0.72 MM) – 55 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Easy Splice 75 Durometer Black Viton A Fluoroelastomer Compound O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.

Easy Splice 0.25″ +/- 0.013″ (6.4 +/- 0.38 MM) – 55 Durometer – Black Viton A™ O-Ring Cord can withstand temperatures up to 400° F (204° C) and has a max torque of 23.25 Inch/lbs.