Products in Building Envelope & Roofing: Epoxy & Epoxy Derivatives

Anchor Paint Manufacturing Ancorpoxy Series 6900 is a high-solids modified polyamine cure epoxy coating that provides a low temperature cure with excellent chemical and solvent resistance. Anchorpoxy 6900 is recommended for civil engineering, building and construction applications. Anchorpoxy 6900 is excellent where hi-gloss, smooth, non-yellowing properties are required.

APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

Anchor Paint Manufacturing Hi-Solids Epoxy Primer CC1514 is a two-component, high-solids modified polyamine cure epoxy coating that provides a low temperature cure with excellent chemical and solvent resistance. Modified polyamine cured epoxies combine outstanding resistance to solvents, salt and fresh water, acids and bases, shock, and abrasion.

Polin EP 9115 is a two component water based epoxy paint primer.

CHS-EPOXY 572 is a Bisphenol A/F epoxy resin

IBA Kimya San. ve Tic. A.S. FF87 is a thermosetting powder coatings based on epoxy and polyester resins designed for interior applications. It has excellent flow out and good yellowing resistance.

CHS-EPOXY 571 is a Bisphenol A/F epoxy resin.

EPOXYPLUS is the latest advancement in non-staining technology. Specially formulated with 100% solid epoxy resins and hardeners, EPOXYPLUS uses integrally colored quartz fillers, which eliminates pigment staining of tiles, typical of traditional cement and epoxy grouts and joint filters. It can be used for setting and grouting ceramic tile, pavers, marble and stone over a variety of substrates.

AmCoat Industries Rhinopoxy is a two part, water-borne epoxy. Unlike traditional epoxies, this water based epoxy is eco-friendly, low odor, and easy to apply. RHINOPOXY provides a high-gloss, hard finish that can protect a wide variety of surfaces. RHINOPOXY is tintable and benefits include chemical/solvent resistance and excellent hide.

Black Swan® Stik-It Epoxy Putty is a kneadable fast curing epoxy putty that mixes in one minute to provide permanent repairs to many surfaces including metals, wood, glass, concrete ceramics and numerous plastics. One hour after mixing, Black Swan® Stik-It Epoxy Putty can be drilled, sawed, sanded, filed, tapped, machined or painted. It comes in a handy tootsie roll form with the curing agent encapsulated in the contrasting color base material. Its remodeling clay-like consistency eliminated drips and runs, provides no mess application with no tools required for use. Stik-It Epoxy Putty is a general purpose epoxy putty.

AROFLINT® 608 is an oxirane-modified ester supplied without solvent. It is used in combination with AROFLINT® 252 Z1-60, AROFLINT® 404-XX-60, AROFLINT® 808-XD-71, or AROFLINT® 91-314 (high acid value polyesters) to formulate high performance, durable coatings.

EPOVIA KAYAK KF3202L Series - Elastomeric BPA-epoxy vinyl ester resin. Main Applications areas are Aeolian,Aeronautical,Agrochemical,Agrobusiness,Automotive,Building and Construction,Composites,Consumer Products,Home and Domestic Applications,Industrial sector,Marine,Mass Transports,Railway Sector etc.

APCM DA 4518 E-Glass is a modified epoxy system coated on heavy weight unidirectional E-Glass fibers. This product is designed to build excellent unidirectional strength using a minimum number of plies. DA 4518/E-Glass Uni also features extended room temperature out time and service temperatures to 300°F.

Biresin® CR144 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites.

Duresco NU 514 K/NU 514 L is a Flame retardant epoxy molding compound with good mechanical properties, excellent chemical and high tracking resistance.

APCM DA 409U/G35-150 is a tough, versatile, modified epoxy resin prepreg that cures at 250°F, a standard modulus 150 g/m2 carbon prepreg tape which can also be supplied as a 200g/m2 or a 300 g/m2 prepreg.

Polygem 519 High Temperature Ceramic Tile Adhesive is our industry standard epoxy tile adhesive for use in environments up to 400°F. The Polygem 519 is a thixotropic gel that can adhere tiles applied to vertical and overhead surfaces. The #519 is formulated to provide for a tenacious bond to most ceramic, metal, concrete, fiberglass or wood surfaces. Polygem 519 is moisture resistant and will even cure underwater.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

IBA Kimya San. ve Tic. A.S. FF20 is a thermosetting matt and semimat powder coatings based on epoxy and polyester resins designed for interior applications. It has excellent yellowing resistance.

The TE06 Powder coatings are thermosetting paints, which means that when heated, they transform irreversibly into a very hard adherent plastic material with a high index of resistance to most chemical agents, resulting in high-quality coatings in a single layer that can be shiny, satin, matte, textured, granite, transparent, metallic, and so on. Its physical composition is 100 percent dry extract, which can be applied using various electrostatic processes on a variety of supports (metal, glass, ceramics, and so on), followed by a predetermined stuffing.

DURACLAD ECS C-307 is a tile adhesive.

The TE01 Powder coatings are thermosetting paints, which means that when heated, they transform irreversibly into a very hard adherent plastic material with a high index of resistance to most chemical agents, resulting in high-quality coatings in a single layer that can be shiny, satin, matte, textured, granite, transparent, metallic, and so on. Its physical composition is 100 percent dry extract, which can be applied using various electrostatic processes on a variety of supports (metal, glass, ceramics, and so on), followed by a predetermined stuffing.

Polyglass Coatings EP HiBuild Primer is a high solid, high build, twocomponent epoxy primer. EP HiBuild Primer is ideally suited for heavy industrial uses and/or waterproofing requirements.

Epovia Optimum® KRF-1051 - novolac epoxy vinyl ester resin, chemical and heat resistance, low color, low foaming, fast cure. Main applications areas are building and construction, chemical industry, industrial sector etc.

CHS-EPOXY 573 Is a Bisphenol A/F epoxy resin

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

EPOTUF® 20-009 is an epoxy ester resin supplied at 60% solids in xylene, designed for baking and air drying primers and enamels.

SurePoxy HM Gel is a 100% solids, two component, moisture-insensitive, epoxy resin system. This is a highly thixotropic, multi-purpose gel adhesive for use with concrete, metals such as steel, wood, and other substrates. SurePoxy HM Gel is completely non-shrinking and does not contain any oil extenders.

AmCoat Industries Rhinopoxy Ultra is a two-part high gloss epoxy that offers beauty and protection for the harshest environments. It is a true immersion epoxy that can be used directly on metal or as a tie coat in outdoor projects. It is ideal for pipes, high use railings, and perpetually wet environments. RHINOPOXY ULTRA offers excellent resistance to chemicals, corrosion, and severe environments.

EPOTUF® 37-140 is the standard, undiluted, general purpose, diglycidyl ether of Bisphenol-A epoxy resin.

The TE03 Powder coatings are thermosetting paints, which means that when heated, they transform irreversibly into a very hard adherent plastic material with a high index of resistance to most chemical agents, resulting in high-quality coatings in a single layer that can be shiny, satin, matte, textured, granite, transparent, metallic, and so on. Its physical composition is 100 percent dry extract, which can be applied using various electrostatic processes on a variety of supports (metal, glass, ceramics, and so on), followed by a predetermined stuffing.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

True-Bond LT™ is formulated for cold temperature applications as low as 0°F. Widely used by food plants for repairing freezer floors while the freezer remains operational. Also great for those outdoor repairs that just can't wait until spring. True-Bond LT™ is concrete filler and bonder that will not separate from concrete. Resurfaces chipped and pitted concrete. Resists wear, corrosives, weather, impact. Bonds cracked curbing, masonry, swimming pools. Waterproof. One application lasts for many years.

CoatMasters® 9007 is an admixture made of advanced silicon emulsion, formulated to be added during the mixing of cement, water, and other aggregate medium. This liquid emulsion is recommended to be added by completely mixing with the total water required for hydration prior into adding to the mix. This results in a complete homogenous mix and ensures efficient bonding to silicates during the hydration of cement. CM 9007 will immediately bond with silica and block any fluid passages in the concrete matrix rendering it completely sealed from any type of fluid penetration. The effect will prevent many other types of fluid to be blocked penetrating its capillary walls. A microscopic membrane will form but will not exceedingly affect the surface tension of the walls, thus enabling other coating materials to be applied. The gloss and sheen of the surface will not change. CM 9007 provides long lasting protection against water vapor permeability, and resistance to staining and/or color deterioration. The product will naturally protect color, and continuously provide a breathable porous substrate.

NXT® Epoxy Primer is a two component, high-solids epoxy primer applied with a sand broadcast for use with NXT decorative wear surfaces.

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.