Products in Building Envelope & Roofing: Polycarbonate (PC)

SPINOPC® T43 001 GR08 2060 is a PC Unfilled Gray (RAL 7035) Flame Retardant for injection applications.

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3027U is a UV stabilized polycarbonate resin grade which has a high melt viscosity and transparency in combination with superior physical properties. CHARACTERISTICS High UV stability Superior impact strength Workable under a wide range of temperatures (-100°C ~ 135°C) High electrical performance Good dimensional stability Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3027U resin grade is used in out-door applications such as electric meter cover, window panes, sing board, wind break, signal lamps, and ship lights etc.

LUKALON® is a Primary PC materials with the addition of recycled material of the same kind that have specifically modified properties.

Exolon® AR sheet is an abrasion and enhanced UV resistant polycarbonate sheet that offers glasslike hardness coupled with the impact strength of standard polycarbonate. Exolon® AR has a 10-years warranty against breakage and 7-years warranty against delamination and weathering.

ROMILOY® 1045 F PG is PC/ABS, injection molding grade, varnishable, plating grade, impact modified.

AMPLUS PC12 G10 0323 BK is a polycarbonate 10% glass fiber reinforced black.

Trizod® OP Optical Grade Polycarbonate 1620-0312xxxx is a clear polished, ultraviolet-stabilized polycarbonate sheet specially engineered for improved optical performance. It also offers improved flammability performance over general purpose PC. It has a thickness of 1.5 mm and 3.0 mm and V0 at a thickness of 6.0 mm.

Exolon® Multi UV IQ-Relax are opal white sheets, which dramatically reduce the heat of the sunlight, allowing the visible light to pass through. They have a built-in intelligence system that automatically adjusts to ambient conditions. Exolon® multi IQ-Relax gives comfort and enables you to lean back in your conservatory with a pleasant and unique relax feeling.

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 2100 x 3000 has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

ROMILOY® 6020 UV is PC/ASA, injection molding grade, high-impact, high heat resistance, UV stabilized.

Irpen Group Polycarbonate UV - Flat Sheet 3050mm x 2050mm x 2mm is offered as a flat, clear transparent material used in glazing and safety applications where strength and durability are paramount. The sheet can be used indoors and also has the benefit of a high performance co-extruded UV protection system, this helps to prevent yellowing and loss of strength thus guaranteeing a longer outdoor life.

AKYVER® PC MULTI-WALL is a polycarbonate sheet from 4 to 50 mm used for all type of roofing or cladding applications.

Irpen Group Polycarbonate UV - Flat Sheet 2500mm x 1250mm x 4mm is offered as a flat, clear transparent material used in glazing and safety applications where strength and durability are paramount. The sheet can be used indoors and also has the benefit of a high performance co-extruded UV protection system, this helps to prevent yellowing and loss of strength thus guaranteeing a longer outdoor life.

Abdullah Al Barrak Plastic Products Polycarbonate Plain Sheet 1220 x 2440 is basically a formless resin possessing a perfect blend of mechanical, optical, thermal, and electrical properties as compared to other materials like metals, glass and other plastics. Polycarbonate Plain sheets are virtually unbreakable in nature and at the same time reflecting an unmatched combination of visual appeal, durability and excellent light transmission. With its high impact strength, polycarbonate Plain Sheet can stand up to anything and everything from stones to hammers, from rough handling during transportation to deliberate damage, without shattering or breaking. Due to its outstanding impact resistance feature in summers and winters, it has completely replaced to other plastic sheets.

SPINOPC® T30 200 NC00 is a PC UNFILLED NATURAL for injection applications.

Trizod® OP-ESD Optical Grade Polycarbonate with Static-dissipative/Mar-resistant Surface Coating 1620SD-0177xxxx is a transparent, UV (ultraviolet)-stabilized extrusion grade specially engineered for improved processing performance, including reduced plate-out and low smoke evolution at the die.

SPINOPC® P16-061 is a PC %20 GLASS FIBER BLACK for injection applications.

Irpen Group Polycarbonate UV - Flat Sheet 3050mm x 2050mm x 5mm is offered as a flat, clear transparent material used in glazing and safety applications where strength and durability are paramount. The sheet can be used indoors and also has the benefit of a high performance co-extruded UV protection system, this helps to prevent yellowing and loss of strength thus guaranteeing a longer outdoor life.

Abdullah Al Barrak Plastic Products Polycarbonate Plain Sheet 2050 x 3000 is basically a formless resin possessing a perfect blend of mechanical, optical, thermal, and electrical properties as compared to other materials like metals, glass and other plastics. Polycarbonate Plain sheets are virtually unbreakable in nature and at the same time reflecting an unmatched combination of visual appeal, durability and excellent light transmission. With its high impact strength, polycarbonate Plain Sheet can stand up to anything and everything from stones to hammers, from rough handling during transportation to deliberate damage, without shattering or breaking. Due to its outstanding impact resistance feature in summers and winters, it has completely replaced to other plastic sheets.

Exolon® multi UV 5M/25-20 is a polycarbonate sheet of 25 mm thickness, with a M-structure for enhanced stiffness. It combines good load bearing properties, good thermal insulation, light transmission and excellent weather resistance. The sheet is lightweight, impact resistant and easy to install. The sheets are produced with a coextruded UV-protective layer, which is homogeneously fused with the sheet material. This UV-protected side must be installed facing upwards/outwards. It provides Exolon® multi UV with a highly effective protection against weathering, guaranteed for 10 years.

Armor Plastics AP-HC1 offer high strength, low weight, and ideal optical properties, but plastic surfaces are prone to scratching and chemical damage. Armor Plastics’ hard coating is scratch and chemical resistant, improving functionality and durability of polycarbonate across many applications. Armor Plastics’ AP-HC1 Sheet features our high-tech abrasion and chemical resistant coating on both sides to increase the useful lifetime of the polycarbonate sheet. We’ve refined our process and proven that our hard coating has the same or better abrasion resistance than more expensive thermal coating for flat applications. AP-HC1 sheets are used for flat applications such as safety barriers, transparent glazing in schools and other institutions to protect staff, machine guards, and multiple other applications. This product is recommended for indoor applications only.

Trizod® MG Machine Grade Polycarbonate 1600-0625xxxx is clear and has a blue tint with a thickness of 0.625 inches.

Exolon® Multi UV 7-wall is a 7-wall polycarbonate sheet of 16 mm thickness. It combines high light transmission, excellent thermal insulation and excellent weather resistance. The sheet is lightweight, impact resistant and easy to install. The sheets are produced with a coextruded UV-protective layer, which is homogeneously fused with the sheet material.This UV-protected side must be installed facing upwards/outwards. It provides Exolon® multi UV with a highly effective protection against weathering, guaranteed for 10 years.

Exolon® GP stands for solid polycarbonate sheets. Their high transparency and smooth surface make them an attractive material for a wide range of applications. They offer extreme impact resistance, even at temperatures down to -100°C. The polycarbonate sheets can be thermoformed and cold-bent and are easy to process.

Polycarbonat abbreviated as PC.

Tubus Bauer GmbH PC 4,0-80 is a tubus core made with Polycarbonate.

ROMILOY® 9170 is PC/ABS, injection molding grade, chlorine-, bromine- and antimon-free flame retardant.

Trizod® OP-ESD Optical Grade Polycarbonate with Static-dissipative/Mar-resistant Surface Coating 1620SD-0250xxxx is a transparent, UV (ultraviolet)-stabilized extrusion grade specially engineered for improved processing performance, including reduced plate-out and low smoke evolution at the die.

ROMILOY® 1055 F PG is PC/ABS, injection molding grade, easy-flowing, plating grade.

Abdullah Al Barrak Plastic Products Polycarbonate Plain Sheet 1000 x 2000 is basically a formless resin possessing a perfect blend of mechanical, optical, thermal, and electrical properties as compared to other materials like metals, glass and other plastics. Polycarbonate Plain sheets are virtually unbreakable in nature and at the same time reflecting an unmatched combination of visual appeal, durability and excellent light transmission. With its high impact strength, polycarbonate Plain Sheet can stand up to anything and everything from stones to hammers, from rough handling during transportation to deliberate damage, without shattering or breaking. Due to its outstanding impact resistance feature in summers and winters, it has completely replaced to other plastic sheets.

Gulf Acrylics Industries PC Solid Sheet find use in various glazing, roofing, sound barrier applications across industry sectors and for applications like cladding, flashing, decorative applications, lighting, thermoforming etc.

SAPHIR® FLEX is a polycarbonate sheet with a unique flexible hard coating for curved applications. SAPHIR® FLEX is a hard-coated polycarbonate sheet, glass like in appearance. The high impact strength of polycarbonate is combined with a flexible coating for cold curved applications, improved weatherability and chemical resistance and good protection against abrasion.

Dongguan SUGO Plastics Technology B2404 FR has high mechanical strength, anti-static, static dissipative with good toughness and good dimensional stability.it is also conductive, EMI with good creep resistance and ROHS compliant, heat & cold resistance.

SPINOPC® T45 001 BK55 is a PC UNFILLED BLACK for injection applications.

Polycarbonat +30% fiber glassr abbreviated as PC+GF30 used in Automotive, Terminal Blocks, Plugs & Sockets applications.

Tubus Bauer GmbH PC 7,0-70 is a tubus core made with Polycarbonate.