Products in Construction Adhesives

LIOCRYL AM 432 is an aqueous pure acrylic emulsion that is fine-particle size and solvent- and plasticiser-free. This emulsion is particularly suitable for the formulation of primer coats with good wet adhesion. Pure acrylic emulsion for use in pigmented matt and silk interior and exterior paints. It possesses shear stability and good stamp adhesion. It has applications in architectural coatings, construction adhesives, concrete coatings, and stains.

DeCAL 5032 is designed to release bubbles and control foam generated in a wide range of aqueous systems containing surfactants. They are blends of non-ionic surfactants and hydrophobes in a highly refined mineral oil. They are non-silicone based. It is used in many applications including water-based paints, adhesives, carpet backing, paper coating, and effluent treatment.

OMACIDETM™ IPBC 20 TX Fungicide is a highly effective broad spectrum fungicide suitable for the preservation of a variety of solvent-based industrial products, including architectural coatings, wood stains and construction materials, against spoilage from fungi & yeasts. The active agent is 3-iodo 2-propynyl-N-butylcarbamate (IPBC) in a solvent package of an ester alcohol and glycol ether.

Crestomer® 1151A Structural Adhesive has Lloyd's approval. This high-performance structural adhesive and filleting compound is specially designed for bulk applications with either a 10:1 catalyst ratio or a 50:1 catalyst ratio. It exhibits non-sagging and fast-gelling properties, enabling the user to work with bonded parts in 2 hours. Compared to other competitive structural adhesives, this product has noticeably less odor and can be used to bond a wide range of substrates with minimal surface preparation.

Crestafix® 621CC 85 Bonding Paste is a pre-accelerated urethane acrylate/ isophthalic polyester high performance bonding paste. It is a non-sagging, filled compound, specifically designed for the assembly and bonding of GRP moldings. This highliy thixotropic polyester can also be used on timber and plasterboard.

Crestabond® M7-15 Structural Adhesive is a toughened, two-component 1:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts, especially with galvanized metals.

Texicryl® 13-073 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives. This emulsion is especially suitable for floor tile adhesives and also used in the formulation of primer systems. It controls the porosity and aids adhesion to the base substrates.

Texicryl® 13-070 is a styrene acrylic copolymer emulsion designed primarily as a binder for D1 ceramic tile adhesives. It has been designed to be formulated, with a wide range of filler types, into D1 tile adhesives. It acts as a binder for use in EN 12004-1and2: 2017 D1 CTAs, economic exterior and interior coatings, fence stains and flat paints.

Crestomer® Advantage 10 Structural Adhesive bonds a wide range of substrates with minimal surface preparation and a lower odor when compared to competitive materials. It is white in color and has a fast gel time of 10 minutes, with a workable time of 70 minutes for bonded parts. This product is based on Scott Bader's innovative urethane acrylate technology and exhibits exceptional impact strength and toughness. Its excellent adhesion and gap-filling capabilities offer great flexibility in design with significant time and cost savings.

Crestabond® M1-05 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 4 to 7 minutes.

Texicryl® 13-078 is a styrene acrylic copolymer emulsion, designed primarily as a binder for high performance ceramic tile adhesives. It has been designed to be formulated with a wide range of filler types into water resistant tile adhesives and grouts.

Crestafix® 90-82PA Polyester Bonding Paste is a pre-accelerated polyester bonding paste. This product is a viscous, white, filled compound that is specifically designed for the assembly and bonding of GRP moldings. Its applications include panels, inserts, internal frames, ribs, composite constructions, and car body components. This product is a high productivity grade designed for use with narrow mixers that will dispense at a high flow rate while maintaining thixotropic properties upon vertical application.

Crestabond® M1-20 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 16 to 22 minutes.

Crestomer® Advantage 60 Structural Adhesive bonds a wide range of substrates with minimal surface preparation and a lower odor when compared to competitive materials. It is white in color and has a gel time of 60 minutes, with a workable time of 3 hours for bonded parts. This product is based on Scott Bader's innovative urethane acrylate technology and exhibits exceptional impact strength and toughness. Its excellent adhesion and gap-filling capabilities offer great flexibility in design with significant time and cost savings.

Crestafix® 630PA is a pre-accelerated vinyl ester-based high-performance bonding paste. This product is a non-sagging, filled compound with high strength, specifically designed for the assembly and bonding of GRP moldings. Its applications include panels, inserts, internal frames, ribs, internal core materials, and composite constructions. This product provides high shear strength bonded joints without the need for mechanical fixings.

Crestafix® B72R Bonding Paste is a polyester-based, MEKP catalysed core bedding compound, developed for both hand-layup and vacuum-bag core installation. It is used as a 2-part system in conjunction with a priming resin applied to the core surface. Lightweight and non-sagging, Crestafix® B72R is formulated to the degree of elasticity required for the core to skin interface.

Crestabond® M1-30 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 25 to 35 minutes.

Texicryl® 13-065 is a styrene acrylic copolymer emulsion,designed primarily as a binder for high performance ceramic tile adhesives. It has been designed to be formulated with a wide range of filler types into water resistant tile adhesives and fix and grouts.

Crestomer® 1186PA Structural Adhesive is a multi-purpose structural adhesive with exceptional adhesion to a wide range of metals, ceramics, and polymeric materials. In addition, it exhibits superior properties for impact resistance and resistance to crack propagation when compared to polyester bonding pastes. This product is pre-accelerated and maintains a high-strength structural bond even when used as a gap filler with non-slumping and low-odor properties. It has been certified by Lloyds.

Crestomer® 1152PA Structural Adhesive provides high performance and is designed for demanding applications. It creates tough bonds with greater movement and allows for significant time, cost, and weight savings. This product has reduced styrene emissions, and it greatly improves cosmetics. It can be used to bond many substrates and has certified approvals from Lloyds, DNV, and RINA.

Crestomer® 1150PA is a two-part, pre-accelerated, highly thixotropic structural adhesive that is based on unsaturated urethane-acrylate in styrene monomer. It is used in many structural composite applications and has excellent adhesion to FRP laminates, core materials, wood, and some metals. This product can be used for bonding diesel tanks, contour joints in FRP components, building up damaged areas, and bonding "green" FRP.

Crestomer® Advantage 30 Structural Adhesive is a white, high-performance structural adhesive offering the same advantages as Crestomer® 1151A but in a more convenient, pre-packed 380ml co-axial cartridge. It is particularly suitable for marine applications and has Lloyd's approval. The opaque white color of the adhesive blends well aesthetically with cosmetically sensitive applications.

Crestafix® 90-84PA Polyester Bonding Paste is a lightweight, low-exotherm, pre-accelerated orthophthalic polyester bonding paste. It is a non-sagging compound, designed for non-structural applications where gap-filling may be a secondary requirement. This product has been specifically designed to provide weight-saving properties and ease of application.

Crestomer® 1196PA Structural Adhesive is a low-density, high-performance structural core adhesive with good gap-filling properties. This product is based on Scott Bader's innovative urethane acrylate technology and is used in sandwich construction where strong, tough, highly impact-resistant structures are required. Compared to other core bonding methods, this product has reduced print through, reduced weight, and outstanding adhesion. It has Lloyds' approval and can be used to bond many substrates. This product has been formulated to bond core materials such as rigid PVC foam and balsa to cured or semi-cured FRP skins. Using Crestomer® 1196PA gives a significantly tougher and more durable structural bond than a polyester resin/glass structure or polyester bonding adhesive. In addition, it provides significant weight savings, reduced styrene emissions, and greatly improved cosmetics with the elimination of core print-through.

Texicryl® 13-066 is a styrene acrylic copolymer emulsion, designed primarily for the production of flexible, water-resistant ceramic tile adhesives and is especially suitable for floor tile adhesive. It can be compounded into adhesives with a high degree of flexibility for use with wall and floor ceramic tiles.

Texicryl® 13-308 is an alkali soluble emulsion designed as a thickener for water-based formulations. It can be used in the formulation of ceramic tile adhesives, paints, waterborne coating systems and for use in EN 12004-1and2: 2017 D1 CTAs, a wide range of building adhesives and highly filled coatings.

Crestafix® 90-80PA Polyester Bonding Paste is a pre-accelerated, orthophthalic polyester bonding paste that is reinforced with 3 mm glass fibers. This product exhibits exceptional mechanical and handling properties, has low shrinkage, and has better resistance to impact. It has been specifically designed for the assembly and bonding of GRP moldings such as panels, inserts, internal frames, ribs, composite constructions, and car body components. It is non-sagging and does not require resin additions.

Texicryl® 13-619 is a styrene acrylic copolymer emulsion designed for formulation of co-solvent free construction adhesives. It can be used in the formulation of high performance water resistant tile adhesives, fix and grouts and general purpose fillers. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Crestabond® M7-05 Structural Adhesive is a toughened, two-component 1:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts, especially with galvanized metals. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 4 to 7 minutes.

Crestabond® M1-04 Structural Adhesive is a toughened, two-component 10:1 MMA structural adhesive that is designed for bonding a wide range of substrates, including metals, plastics, and composite materials in industrial applications. This adhesive demonstrates excellent impact, peel, shear, compressive strength, and fatigue resistance properties across all bonded parts. Crestabond® is a primer-less MMA adhesive requiring minimal surface preparation, which helps reduce overall production costs and increase productivity. This product has a working time of 3 to 5 minutes.

Texicryl® 13-691 is an APEO free styrene acrylic copolymer emulsion designed for use in a variety of coating compounds and in a wide range of water-based paints and waterproofing compounds. Also used as a flexible water resistant binder for use in EN 12004:2001 D2 (class AA) ceramic tile adhesives and ceramic floor tile adhesives.

Texicryl® 13-023 is an aqueous dispersion of a modified styrene acrylic copolymer, used in the manufacture of high performance ceramic tile adhesives. Due to the nature of its special emulsifier system, it is possible to use Texicryl® 13-023 with various fillers (silicas, calcium carbonate, microdol etc). It functions as a high performance water resistant binder for EN 12004-1 and 2: 2017 D2 CTAs and fix grouts.

Crestafix® 90-78PA Polyester Bonding Paste is a fast-curing, pre-accelerated, orthophthalic polyester bonding paste. It exhibits exceptional handling properties, especially on GRP and wood substrates. This product has been specifically designed for the assembly and bonding of GRP moldings such as panels, inserts, internal frames, ribs, and any other non-structural bonding applications. It is non-sagging and does not require resin additions.

Crestomer® 1153PA Structural Adhesive provides high performance and a long open time designed for demanding applications. More suited to large structural uses, it creates tough bonds with greater movement and allows for significant time, cost, and weight savings to be made. This product has reduced styrene emissions and greatly improves cosmetics. It has Lloyds' approval and can be used to bond many substrates.

Flyeva 102 is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.

Flyeva 102H is a high-quality VAE emulsion, with excellent initial adhesion ability and mechanical stability. This product is generally applied to porous or non-porous materials. It has been widely used in industries like wood processing, paper cartons or tubes, packing, plastics, and metal membranes.