Products in Structural Components

PanTINT® 73 are pigment dispersions for industrial solvent based epoxy coatings. They consist of industrial quality organic and inorganic pigments finely milled in Bisphenol A carrier resin. The pigments chosen for the PanTINT 73 exhibit color strength, durability, chemical resistance and light fastness. Most are suitable for interior and exterior applications. The epoxy carrier resin along with a proprietary additive package allow for high pigment solids and superior compatibility with a number of epoxy based systems. The 73 series’ will be compatible with a wide range of epoxy resin formulations for industrial, maintenance and architectural coating applications.

CRACKBOND® V200 HI-MOD is a two-component, moisture insensitive, high strength epoxy healer/sealer deck penetrant, designed to prolong the life of concrete by sealing cracks against moisture and preventing chloride ion intrusion. It may be successfully applied and cured at temperatures between 60°F and 95°F (16°C and 35°C ).

ENYDYNE® I 65133 A - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in injection molding,rtm method.

Polsil® GUM 100/30 is general purpose heat cured elastomer widely used for molding and extrusion in various industries.

PCW PP Flame retardants have naturally responded to the more stringent demands in the electrical and construction industry. PCW therefore offers a wide portfolio of especially flame-resistant PP types. We thereby cover a wide range of requirements and standards, such as UL 94 V0-V2 or the VDE 0207 glowing wire test. Our recipes contain halogenated as well as halogen-free flame retardants. They are also PBDE-free and thus meet RoHS guidelines. And it is for maximum flame and fire protection.

Self-lubricating product based on Polyoximethylene (POM). Molybdenum dysulphide.

Norsodyne® BN-595Y - excellent pearl dispersion and surface gloss, thin button. Main applications areas are leisure and clothing etc.

Nylene Duratel MF3 is a high-viscosity acetal co-polymer. Duratel MF3 has slightly higher toughness than standard MF9, and parts molded with MF3 should have thicker wall sections and shorter flow lengths to accommodate the higher viscosity. MF3 is suitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.

Morgan Adhesives Professional Tilers Blend is a pure white adhesive composed of cement, fine graded sands and other special additives. This adhesive has been polymer modified to achieve a high bond strength with non-porous tiles.

Techno Compound PBT4 Natural (9999) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

Divinycell PX is based on PET, which makes it to a recyclable, thermoplastic sandwich core material. Divinycell PX provides excellent FST (fire, smoke & toxicity) properties, high temperature performance, very good fatigue properties, good mechanical characteristics and chemical resistance. It also offers excellent acoustic/thermal insulation properties and low water absorption. Divinycell PX is particularly ideal for public transportation and industrial applications. The energy efficiency of a Divinycell PX sandwich makes it ideal for transport applications such as interior paneling, floors and exterior panels for trains, trams, busses and coaches. In the industrial/ construction market, the good mechanical and FST properties of Divinycell PX allows it to be used for a wide variety of applications such as domes, architectural claddings and industrial housings.

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

ACM CG600X is Multiaxial Hybrid Fabrics with Standard fabric width of1270 mm having EP/VE Resin compatibility Multiaxial fabrics are textile materials made of several layers of high-strength composite fibers stitched together with thin threads. Multiaxial fabric can be carbon, glass, basalt, and hybrid according to the source fibers.

A soft, black thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

Polynt Group Polygel 34 - iso NPG gel coat; resistant to water and osmotic blistering. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.

Our vinyl ester laminating resin was formulated with an epoxy vinyl ester polymer This gives it very good physical properties and a high resistance to corrosion and penetration of water. This resin is recommended for the manufacture of FRP structures of small to large size with high production rates at room temperature. It is formulated to cure at room temperature with methyl ethyl ketone peroxide.

A soft, black SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

NORSODYNE® F 25233 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding,hand lay up and spray up method.

Woven fabrics made of FILAVA™ WF BSB3_0800.XXX.0127.T2/2.ISAA continuous filament for technical textiles and high-performance composites.

SX-02-P is a Basalt Fiber which has a chemical composition similar to glass, but what truly distinguishes it from glass is it’s high-melting point, allowing it to be exposed to high temperatures for extended periods of time.

Absylux® is Westlake Plastics’ family of Acrylonitrile Butadiene Styrene (ABS). Absylux® is an economical all-purpose engineering plastic exhibiting good dimensional stability, impact strength, and stiffness. Absylux® is a popular choice for prototyping parts where low volumes and easy machining are required. Absylux® can also be painted and is easy to bond with adhesives. Absylux® is FDA Compliant in natural (beige) and black for food applications.Westlake Plastics proprietary compression molding process provides better dimensional stability and resistance to warpage during machining compared to other extruded ABS sheet products in the marketplace.

APCM DA 4090 is modified epoxy pre-impregnated system which can cure at 250°F (121°C) for one hour. DA 4090 | DA 4092 can be supplied on any commercially available glass, Kevlar, or graphite fabric. DA 4090 is a one sided pre-impregnated fabric yielding a single sided tack material. DA 4092 is the same system where both sides of the fabric are pre-impregnated yielding a double sided tack material. Both prepreg systems can be used for laminating and honeycomb sandwich construction.

Stypol® RLPH1410 - low color orthophthalic DCPD blend RTM resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

The properties are essentially comparable to those of LiNNOTAM. By using a stabilizer, the thermal-oxidative Counteracted material degradation when exposed to temperature. In comparison to pure cast polyamide, higher usage temperatures can be achieved realize.

NIRETAN B F25 M contains special characteristics such as high impact or impact modified.

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

Plain weave CARBON FIBER PW 3K PRE-PREG may be stored at 75° F for a shelf life of 90 days and for maximum shelft life, sotre below 10° F for a maximum of 2 years and bring to room temperature for fabrication.

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) which has non-migratory type antistatic properties. Non- migratory type antistatic property is independent from relative humidity. This product is a good option when permanent antistatic property is required.

Exac PFA is a Perfluoroalkoxy (PFA) product. It is available in North America. Applications of Exac PFA include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Sylramic™ SiCFiber, Tow is supplied on 3 inch diameter cardboard spools. Lengths up to 800 meters (145 grams) are available. Tow length may vary depending upon availability and customer requirements.

QISO® HH-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® HH-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

AeroWindTech AWTPP 106 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. The fiber is manufactured from 100% polyester and melts at approximately 480°F (249°C). The fabric leaves a rough surface impression for priming and secondary bonding. It is available in precision slit widths of 60 inches or less.

Dissipative product based on Polypropylene homopolymer (PPh). Unfilled.

Self-lubricating product based on Polyamide 66 (PA66). Silicone / PTFE.

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Fibres Recherche Developpement GREEN B is a collection of fractions designed to be used as reinforcement or filler in thermoplastic materials. These powders with a particle size less than 2 mm can come from European species (hemp, flax...) as well as exotic species. These powders, which are round or needle-shaped, are designed for extrusion processes and can be used to improve the mechanical properties of polymer matrices or increase the viscosity of the molten blend..