Products in Wallcoverings & Decorative Laminates

VINNAPAS® EP 441 is a plasticizer-free aqueous polymer dispersion composed of vinyl acetate and ethylene monomers. It provides strong adhesion to a wide range of plastic surfaces, allowing for the creation of durable and flexible adhesive joints. Notably, it exhibits excellent reemulsification capabilities and boasts a high setting speed, which makes it particularly suitable for nozzle application methods.

ELASTOSIL® M 4630 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It offers a fast and non-shrink cure at room temperature, which can be significantly accelerated with the application of heat. The main application of ELASTOSIL® M 4630 A/B is in making molds for concrete casting. Additionally, this grade is compliant with FDA regulations for food contact applications.

VINNAPAS® EP 17 is an aqueous polymer dispersion, free from plasticizers, that is produced from vinyl acetate and ethylene monomers. It provides good adhesion to various plastic surfaces, allowing for the creation of permanently flexible adhesive joints with high cohesion. This product finds applications in adhesive formulations for paper packaging as well as foil lamination.

ALFONIC 810-6 Ethoxylate is a biodegradable nonionic derived from linear primary ALFOL 810 Alcohol. ALFONIC 810-6 Ethoxylate is in liquid form at room temperature, is essentially 100% active, and has the following structural formula: CH₃(CH₂)x(OCH₂CH₂)₆OH where ‘x’ varies between 7 and 9.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Texicryl® 4025 is an alkali swellable emulsion designed for waterbased printing ink formulations. This emulsion is cross-linkable with thermoset resins, compatable with solvents and other resin systems. It is suitable for inks used on absorbent substrates such as packaging materials and wallpapers. It can also be used in bottle labeling adhesives.

Crystic® Polyester Resin R115NT is a general purpose non thixotropic, non accelerated, orthophthalic, unsaturated polyester resin. It has a gel time of 10 minutes and can be used for the production of filled castings or for reinforced laminates on flat molds.

Lo-Vel® 29 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Lo-Vel® 275 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

Deuteron® OG 8824 includes fine PMU (polymethyl urea) particle dispersions in TMP (EO)3 TA (ethoxylated trimethylolpropane triacrylate) specifically developed for UV-radical curing processes. These dispersions are offered in a dispersed form, tailored to facilitate and enhance various applications within UV curing systems.

Deuteron® OG 8822 includes fine PMU (polymethyl urea) particle dispersions in TMP (EO)3 TA (ethoxylated trimethylolpropane triacrylate) specifically developed for UV-radical curing processes. These dispersions are offered in a dispersed form, tailored to facilitate and enhance various applications within UV curing systems.

Deuteron® OG 8820 consists of fine PMU (polymethyl urea) particle dispersions in TMP (EO)3 TA (ethoxylated trimethylolpropane triacrylate). This system is designed for UV-radical curing processes. Deuteron® OG 8820 also offers a range of versatile applications within this curing method.

Deuteron® OG 8805 comprises fine PMU (polymethyl urea) particle dispersions in DPGDA. Its versatility allows usage as a scratch-resistant additive for high gloss applications or as a matting agent for high-quality finishes, depending on the addition level. Preferred applications for this product family include overprint varnishes, floor coatings (such as PVC, laminate flooring, and wood floors), and wood coatings.

Deuteron® OG 8803 comprises fine PMU (polymethyl urea) particle dispersions in DPGDA. Its versatility allows usage as a scratch-resistant additive for high gloss applications or as a matting agent for high-quality finishes, depending on the addition level. Preferred applications for this product family include overprint varnishes, floor coatings (such as PVC, laminate flooring, and wood floors), and wood coatings.

Deuteron® OG 8807 comprises fine PMU (polymethyl urea) particle dispersions in DPGDA. Its versatility allows usage as a scratch-resistant additive for high gloss applications or as a matting agent for high-quality finishes, depending on the addition level. Preferred applications for this product family include overprint varnishes, floor coatings (such as PVC, laminate flooring, and wood floors), and wood coatings.

VANQUISH™ 100 Antimicrobial is based on the active agent N-butyl-1,2-benzisothiazolin-3-one (BBIT) and is recommended for use in tough and demanding applications especially those exposed to high UV levels. It is a broad spectrum antimicrobial used to prevent fungal, bacterial, and algal spoilage of polymers such as PVC, polyurethane, silicone, polyolefin, polyester, and acrylic articles such as shower curtains, coated fabric, vinyl wall coverings, floor coverings, appliance gaskets, wall and floor coatings, and swimming pool, pond, and ditch liners.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN) is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

Hauthane HD-3011 is a low cost, aromatic, polyether-based, aqueous polyurethane dispersion. Features: Medium soft, tough, flexible film. Unusually dry surface for non-blocking applications. High melting for thermal stability. Can be crosslinked with melamines or aziridines for true thermoset. character and increased adhesion. Excellent hydrolytic stability. Contains n-methyl pyrrolidone (NMP) co-solvent.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 40N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

Hauthane L-2245 is an anionic, aliphatic, aqueous polyurethane dispersion with a low activation temperature. Features: May be crosslinked for improved adhesion and heat-resistance. Non-crystalline nature. Low level of n-methyl pyrrolidone (NMP) co-solvent (-2%).

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 200NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

Hauthane L-2183 is an anionic, aliphatic, aqueous polyurethane dispersion. Features: Low activation temperature (200° F). Can be crosslinked to improve bond strength and heat-resistance. Non-crystalline nature. Contains n-methyl pyrrolidone co-solvent.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50LM is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 100N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 250NJ is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

Hauthane L-2255 is a high solids, anionic, aliphatic, aqueous polyurethane dispersion. Features: High solids (48%), co-solvent free. Can be crosslinked to improve bond strength and heat-resistance. Non-crystalline nature.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 12N is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

BroShield® 45B is a versatile flame retardant designed for various applications, including plastics and elastomers. It offers efficient flame resistance, especially suitable for PVC polymers. Available in liquid form, BroShield® 45B is amber or clear in color, making it compatible with a wide range of applications such as cable jacketing, film, sheets, wall coverings, and more. Its formulation contains tetrabromophthalate ester, ensuring brominated properties.