Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Electrical & Electronics
Parts & Components
Products in Parts & Components
8,537 Products found in Parts & Components
Browse
Applications
Show All 12 Categories
Filters
Suppliers
Product Families
Functions
End Uses
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
ELASTOSIL® LR 3842/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized
Tear Strength:
38.0 - 38.0 kN/m
ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
ELASTOSIL® RT 601 A/B
Polymer Name:
Silicone Elastomer
Chemical Family:
Silicones
Product Type:
Potting Compound, 2K (2 component) Sealant, 2K (2 component) Coating, Encapsulant
Cure Method:
Chemical Cure, Air Dry
ELASTOSIL® RT 601 A/B is a pourable, addition-curing RTV-2 silicone rubber. It has a two-part formulation with a 9:1 mixing ratio. This product features low viscosity, medium cured hardness, and excellent tensile strength. The vulcanizate obtained is crystal clear and highly transparent. It is suitable for various applications such as all-round potting compound and the manufacture of molded articles through casting.
Wacker Chemie AG
ELASTOSIL® LR 3065/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Batteries
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® LR 3065/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.
Wacker Chemie AG
ELASTOSIL® LR 3844/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® LR 3844/40 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
HDK® H21
Chemical Name:
Pyrogenic Silica
CAS Number:
112945-52-5
Functions:
Thickener, Thixotrope, Rheology Modifier
Chemical Family:
Silica
Compatible Polymers & Resins:
Epoxies (EP), Vinyl Esters, Polyurethanes (PU)
Synonyms:
Fumed Silica, Silica, Silicon Dioxide
HDK® H21 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H21 is used as a thickening and thixotropic agent in various applications such as composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.
Wacker Chemie AG
ELASTOSIL® LR 3003/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Plugs, Household Goods, Automobile Door Seals, Vibration Dampers, General Purpose, Batteries
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® LR 3003/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
SEMICOSIL® 988 TIC
Chemical Family:
Silicones
Product Type:
Insulating Coating, 1K (1 component) Coating, 1K (1 component) Adhesive
Cure Method:
Chemical Cure, Heat Cure
Application Area:
Semiconductors, Cure In Place Gasket, Form In Plastic Gaskets (FIPG)
SEMICOSIL® 988 TIC is a non-slump, thermally curable, one-part silicone rubber with excellent insulation properties. This product is optimized for insulation coating applications in disk power semiconductors. It is a ready-to-use system that exhibits thixotropic behavior, ensuring easy application and positioning. SEMICOSIL® 988 TIC is transparent, has a medium hardness, and offers high flexibility as a low-stress adhesive.
Wacker Chemie AG
POWERSIL® 3100 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding
End Uses:
Electrical Components, Arresters, Insulators, Arresters Housings, Bushings, Power Transformers
Features:
High Impact Resistance, Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Shock Resistant, Arc Resistant, Excellent Dielectric Properties, Light Weight, High Consistency, Tracking Resistant, Long Term Protection
Tear Strength:
20.0 - 20.0 kN/m
POWERSIL® 3100 MH silicone rubber is a one-component, addition-curing compound that is ready to use and cures to an electrically insulating, highly erosion-resistant silicone elastomer. This product offers comparatively fast curing times compared to conventional silicone rubber, reducing cure times by 30-50%, depending on the wall thickness of the application, as well as the available machinery and runner system. Furthermore, no peroxide decomposition products are released during the curing process, reducing any potential hazards. The curing system also eliminates the risk of curing inhibition by oxygen.
Wacker Chemie AG
ELASTOSIL® LR 3852/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Good Mold Release, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Cut Through Resistant, Enhanced Tear Resistant, Low Compression Set, Oil Resistant, Heat Stabilized
Tear Strength:
40.0 - 40.0 kN/m
ELASTOSIL® LR 3852/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3852 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.
Wacker Chemie AG
ELASTOSIL® RT 675 A/B
Product Type:
Potting Compound, Encapsulant, 2K (2 component) Sealant
Application Area:
Batteries
Cure Method:
Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® RT 675 A/B is a pourable, addition-curing RTV-2 silicone rubber with a two-part formulation and a 1:1 mixing ratio. It features a very high hardness (Shore A) and excellent heat stability. This silicone rubber is particularly known for its high thermal conductivity, making it ideal for the encapsulation of electronic components.
Wacker Chemie AG
LUMISIL® LR 7601/70 A/B
Processing Methods:
Injection Molding
End Uses:
Lighting Applications, Lighting Fixtures, Automotive Components
Features:
Low VOC, Excellent Transparency Properties, Heat Resistance, Good Electrical Properties, Low Fogging, Excellent Dimensional Accuracy, Good Mechanical Properties, Medium Viscosity, Low Shrinkage, Consistent High Quality, Food Contact Acceptable, UV Resistant, Low Volatility, Fast Curing, High Optical Transparency
Tear Strength:
10.0 - 10.0 kN/m
LUMISIL® LR 7601/70 A/B is a liquid silicone rubber belonging to the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The vulcanizates produced from this material are characterized by their remarkable optical transparency, as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® N199 Transparent
Product Type:
1K (1 component) Sealant
Application Area:
Gaskets, Form In Plastic Gaskets (FIPG), Cure In Place Gasket
Cure Method:
Moisture Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL N199 TRANSPARENT is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. ELASTOSIL® N199 Transparent exhibits excellent primerless adhesion to many substrates with high tear strength. It is a multipurpose adhesive and sealant for the electronics industry, with typical uses for CIPG- and FIPG-applications.
Wacker Chemie AG
LUMISIL® LR 7601/60 A/B
Processing Methods:
Injection Molding
End Uses:
Lighting Applications, Lighting Fixtures, Automotive Components
Features:
Low VOC, Excellent Transparency Properties, Heat Resistance, Good Electrical Properties, Low Fogging, Excellent Dimensional Accuracy, Good Mechanical Properties, Medium Viscosity, Low Shrinkage, Consistent High Quality, Food Contact Acceptable, UV Resistant, Low Volatility, Fast Curing, High Optical Transparency
Tear Strength:
15.0 - 15.0 kN/m
LUMISIL® LR 7601/60 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The resulting vulcanizates exhibit exceptional optical transparency, along with excellent mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3003/20 TR A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Household Goods, Automobile Door Seals, Vibration Dampers, General Purpose, Batteries
Features:
Fast Curing, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® LR 3003/20 TR A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® N 2034
Product Type:
1K (1 component) Sealant
Application Area:
Form In Plastic Gaskets (FIPG), Automotive Headliner
Cure Method:
Moisture Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® N 2034 is a self-leveling, alkoxy-cure, one-component silicone sealant that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates. This product is flame retardant and meets the UL 94 V-0 standards.
Wacker Chemie AG
WACKER® Silicone Paste P 12
Chemical Family:
Silicones
Product Type:
Encapsulant Paste & Ink, Thermally Conductive Paste & Ink, Conductive Paste & Ink, Insulating Coating
Color:
White
Application Area:
Heat Sink, Semiconductors
WACKER® Silicone Paste P 12 is a pure white, soft-consistency heat sink paste with marked thermal conductivity. It is electrically insulating. WACKER® PASTE P 12 is used especially in semiconductor technology as a heat sink paste. When there is a need for good heat transfer from a semiconductor to a cooling element, applying a thin coating of WACKER® PASTE P 12 is advisable. In the assembly of semiconductors such as diodes, transistors, and thyristors, microscopic irregularities may exist on the mating surfaces of the semiconductor and the cooling surface. These surface irregularities can hinder firm metal-to-metal contact when assembled.
Wacker Chemie AG
SEMICOSIL® 988/1K Grey
Product Type:
1K (1 component) Adhesive
Application Area:
Power Control Unit (PCU), Form In Plastic Gaskets (FIPG), Cure In Place Gasket, Batteries, Connectors, Sensors
Cure Method:
Chemical Cure, Heat Cure
Chemical Family:
Silicones
SEMICOSIL® 988/1K Grey is a non-slump, thermally curable, one-part silicone rubber. It is a ready-to-use system that exhibits low viscosity during dispensing, making it easy to work with. This product serves as a low-thermal-stress sealing adhesive with a medium hardness. It offers high flexibility and demonstrates excellent primerless adhesion to a wide range of substrates.
Wacker Chemie AG
POWERSIL® 310 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding
End Uses:
Electrical Components, Arresters, Insulators, Arresters Housings, Bushings, Power Transformers
Features:
High Impact Resistance, Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Shock Resistant, Arc Resistant, Excellent Dielectric Properties, Light Weight, High LOI (Loss On Ignition), High Consistency, Tracking Resistant, Long Term Protection
Tear Strength:
11.0 - 11.0 kN/m
POWERSIL® 310 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product exhibits very good arc resistance, suitable dielectric properties, and good mechanical properties. POWERSIL® 310 MH is specifically recommended for the production of various types of electrical insulating equipment used in outdoor applications, such as composite insulators, arrester housings, bushings, and more.
Wacker Chemie AG
ELASTOSIL® LR 3844/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility
Tear Strength:
22.0 - 22.0 kN/m
ELASTOSIL® LR 3844/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
SEMICOSIL® 987 GR
Product Type:
1K (1 component) Adhesive
Application Area:
Gaskets, Power Control Unit (PCU), Electric Vehicle (EV) Batteries, Form In Plastic Gaskets (FIPG), Electrical Components, Housing
Cure Method:
Heat Cure, Chemical Cure
Chemical Family:
Silicones
SEMICOSIL® 987 GR is a one-part, ready-to-use, thermally curable silicone elastomer that exhibits non-slump properties. It is primarily used as a sealing adhesive. The silicone is thixotropic in nature, allowing for easy application and shaping. It offers high flexibility, making it suitable for low-stress adhesive bonding, such as in molded-in-place gasket (FIPG) applications. Additionally, SEMICOSIL® 987 GR provides primerless adhesion to a wide range of substrates.
Wacker Chemie AG
ELASTOSIL® LR 3675/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Fast Curing, Low Coefficient of Friction, Good Mechanical Properties, Pigmentable, Low Compression Set, Good Electrical Properties
Tear Strength:
33.0 - 33.0 kN/m
ELASTOSIL® LR 3675/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3675 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3070 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the low compression set, there is no need to post-cure finished parts.
Wacker Chemie AG
ELASTOSIL® LR 3072/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals, Cables, Batteries
Features:
High Bleed Resistant, Fast Curing, Good Mechanical Properties, Pigmentable, Excellent Lubricity, Cost Effective, Good Electrical Properties
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® LR 3072/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3005/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers, Batteries
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® LR 3005/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.
Wacker Chemie AG
ELASTOSIL® N9111 White
Product Type:
1K (1 component) Sealant
Application Area:
Gaskets
Cure Method:
Moisture Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® N9111 White is a non-slump, non-corossive, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. It is a multipurpose sealant and adhesive for the appliance, automotive, and electronics industries. Due to its shear-thinning nature, ELASTOSIL® N9111 White is easy to apply. The material starts curing upon contact with air humidity.
Wacker Chemie AG
WACKER SilGel® 613
Product Type:
Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:
Batteries, Sensors, HVAC Ducts, Electric Vehicle (EV) Batteries, Electrical Components
Cure Method:
Heat Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
WACKER SilGel® 613 is a pourable, addition-curing, RTV-2 silicone rubber that undergoes vulcanization at room temperature, resulting in a highly flexible silicone gel. This product offers inherent tack and possesses excellent mechanical damping properties. Furthermore, when used in conjunction with ELASTOSIL® CAT UV, WACKER SilGel® 613 exhibits rapid UV curing at room temperature while maintaining a long pot life.
Wacker Chemie AG
POWERSIL® 311 MH
Polymer Name:
Silicone Elastomer
End Uses:
Arresters, Insulators, Wires, Arresters Housings, Bushings, Cables
Features:
Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Arc Resistant, Excellent Dielectric Properties, High Consistency, Tracking Resistant
Tear Strength:
10.0 - 10.0 kN/m
POWERSIL® 311 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product is specifically recommended for the production of electrical insulating equipment used outdoors, such as composite insulators, arrester housings, bushings, and more. It is particularly suitable for extruded parts that are cured in the air.
Wacker Chemie AG
ELASTOSIL® LR 3072/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals, Cables, Batteries
Features:
High Bleed Resistant, Fast Curing, Good Mechanical Properties, Pigmentable, Excellent Lubricity, Cost Effective, Good Electrical Properties
Tear Strength:
23.0 - 23.0 kN/m
ELASTOSIL® LR 3072/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3856/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Cut Through Resistant, Enhanced Tear Resistant, Low Compression Set, Heat Stabilized, Low Volatility, Good Mold Release, Fast Curing
Tear Strength:
22.0 - 22.0 kN/m
ELASTOSIL® LR 3856/30 A/B is a high-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3856 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.
Wacker Chemie AG
HDK® N20P
Chemical Family:
Silica
Functions:
Reinforcement, Thixotropic Agent
Compatible Polymers & Resins:
Synthetic Rubbers, Natural Rubbers (NR)
Features:
High Purity, Amorphous, Hydrophilic, Good Mechanical Properties, Highly Thixotropic
End Uses:
Sulfuric Acid Gel Batteries, Industrial Applications, Electronics, Electrical/Electronic Applications
Synonyms:
Fumed Silica, Silica, Silicon Dioxide
HDK® N20P is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® N20P is commonly applied in the electronics industry as a white colloidal powder of high purity.
Wacker Chemie AG
LUMISIL® LR 7601/80 A/B
Processing Methods:
Injection Molding
End Uses:
Lighting Applications, Lighting Fixtures, Automotive Components
Features:
Low VOC, Excellent Transparency Properties, Heat Resistance, Good Electrical Properties, Low Fogging, Excellent Dimensional Accuracy, Good Mechanical Properties, Medium Viscosity, Low Shrinkage, Consistent High Quality, Food Contact Acceptable, UV Resistant, Low Volatility, Fast Curing, High Optical Transparency
Tear Strength:
9.0 - 9.0 kN/m
LUMISIL® LR 7601/80 A/B is a liquid silicone rubber from the LUMISIL® LR 7601 series. It is a two-component compound with medium viscosity and fast curing times. The vulcanizates obtained from this material are known for their exceptionally high optical transparency, as well as their outstanding mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3841/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized, Low Volatility
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® LR 3841/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3841 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
ELASTOSIL® LR 3846/20 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized
Tear Strength:
16.0 - 16.0 kN/m
ELASTOSIL® LR 3846/20 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.
Wacker Chemie AG
ELASTOSIL® N10 Transparent
Chemical Family:
Silicones
Product Type:
Solvent free (100% Solids) Sealant, Encapsulant, Solventborne Adhesive, Potting Compound
Cure Method:
Air Dry, Moisture Cure, Chemical Cure
ELASTOSIL® N10 Transparent is a solvent-free, neutral-cure, low-viscous, and non-thixotropic silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates. It is a multipurpose grade for bonding, sealing, and potting, e.g. in electronic applications.
Wacker Chemie AG
ELASTOSIL® RT 722 RB A/B
Product Type:
2K (2 component) Sealant
Application Area:
Electric Vehicle (EV) Batteries, Form In Plastic Gaskets (FIPG), Electrical Components, Housing, Connectors, Gaskets
Cure Method:
Chemical Cure, Air Dry, Heat Cure
Chemical Family:
Silicones
ELASTOSIL® RT 722 RB A/B is a thixotropic, two-component silicone sealing adhesive that cures to an elastomer through thermal curing. It is specifically designed for various sealing applications. This product is well-suited for use as a sealing adhesive for electronic control units, as well as for FIPG (formed-in-place gasket) applications in plastic and metal housings. It can also be used as a dam material for dam-and-fill applications and for sealing and gasketing of housings.
Wacker Chemie AG
ELASTOSIL® N9111 Grey
Product Type:
1K (1 component) Sealant
Application Area:
Gaskets
Cure Method:
Moisture Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® N9111 Grey is a non-slump, alkoxy-cure, one-component silicone that cures at room temperature under the influence of atmospheric moisture. Due to its shear-thinning nature, this product is easy to apply. The material starts curing upon contact with air humidity. It shows excellent primerless adhesion to many substrates, like glass, aluminum, stainless steel, PA, and PBT.
Wacker Chemie AG
ELASTOSIL® LR 3843/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility
Tear Strength:
22.0 - 22.0 kN/m
ELASTOSIL® LR 3843/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Show
36
of 8,537 results
Go to page
1
2
3
4
5
6
7
8
9
10