Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Electrical & Electronics
Parts & Components
Sensors & Actuators
Products in Sensors & Actuators
520 Products found in Sensors & Actuators
Filters
Product Families
Suppliers
Functions
End Uses
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
SILRES® MK Powder
Functions:
Resins, Binders & Matrix Materials
Chemical Family:
Silicones
SILRES® MK Powder is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Additionally, SILRES® MK Powder is the ideal product for making tack-free prepregs with excellent storage stability. When fully cured, SILRES MK POWDER has the lowest carbon content among all WACKER silicone resins, resulting in a high ash content when pyrolized. Composites made of SILRES® MK Powder exhibit long-term stability against weathering, moisture, and UV light. They can be continuously exposed to changing climatic conditions, UV radiation, and temperatures exceeding 300 °C (572 °F). Furthermore, SILRES® MK Powder provides water repellency and excellent electrical insulation properties to the composite materials.
Wacker Chemie AG
SEMICOSIL® 961 TC A/B
Application Area:
Sensors, Batteries, Power Control Unit (PCU), Electrical Components, Electric Vehicle (EV) Batteries
Features:
Abrasion Resistant, High Durability, Tacky, Cost Effective, Easy To Dispense, Shorter Cycle Time, Soft, Good Stability, Good Thermal Conductivity, Low Volatility, Low VOC, Thermally Conductive, Shear Thinning, Good Gap Filling Capabilities, Non-slump
Chemical Family:
Silicones
SEMICOSIL® 961 TC A/B is a shear-thinning, easy-dispensing, non-slump, two-part silicone rubber that cures at room temperature. It transforms into a soft and tacky rubber with excellent thermal conductivity. Specifically designed as an interface material, SEMICOSIL® 961 TC A/B is ideal for heat sink applications in the electronics industry.
Wacker Chemie AG
SEMICOSIL® 950 UV B
Product Type:
Potting Compound, Radiation Curable Coating, 2K (2 component) Adhesive, Encapsulant
Application Area:
Power Control Unit (PCU), Sensors, Electronic Control Unit (ECU), Printed Circuit Boards, Connectors
Cure Method:
Chemical Cure, Radiation Cure, Air Dry
Application Method:
Spray
Chemical Family:
Silicones
SEMICOSIL® 950 UV B is used in combination with SEMICOSIL® 949 UV A as a sprayable, addition-curing, 2-part silicone rubber of low viscosity that cures extremely fast after activation by UV light exposure to a soft silicone elastomer. The applied mixture offers a process control option by UV light (it contains a UV tracer).
Wacker Chemie AG
ELASTOSIL® CAT UV
Functions:
Catalyst
Compatible Polymers & Resins:
Silicones
Features:
Room Temperature Vulcanizing, Long Potlife
ELASTOSIL® CAT UV is a room-temperature curing silicone rubber (RTV-2) that can be used as an organometallic catalyst for addition-curing two-part silicone rubber grades. This versatile product enables fast UV curing at room temperature while maintaining a long pot life.
Wacker Chemie AG
SEMICOSIL® 949 UV A/B
Chemical Family:
Silicones
Product Type:
Potting Compound, Conformal Coating, Radiation Curable Coating, 2K (2 component) Adhesive, 2K (2 component) Coating, Encapsulant
Cure Method:
Chemical Cure, Heat Cure, Radiation Cure, Air Dry
Application Area:
Housing, Electrical Components, Power Control Unit (PCU), Sensors, Electronic Control Unit (ECU)
Application Method:
Spray
SEMICOSIL® 949 UV A/B is a pourable, addition-curing, two-part silicone rubber with low viscosity. This product cures extremely fast when exposed to UV light, resulting in a soft silicone elastomer. SEMICOSIL® 949 UV A has a mixing ratio of 10:1 for its two parts and exhibits low viscosity, making it easy to handle and process. It offers the advantage of extremely fast curing at room temperature after UV activation. The cured elastomer has low hardness (Shore 00). Additionally, SEMICOSIL® 949 UV A contains a UV tracer, providing process control options during application.
Wacker Chemie AG
ELASTOSIL® Film 2030
Polymer Name:
Silicone Elastomer
Physical Form:
Film
Features:
Excellent Dielectric Properties, High Dielectric Strength, Flexible, High Temperature Resistance, Excellent Transparency Properties, High Specific Resistivity, Low Temperature Flexibility, Electrically Insulating, Good Electrical Properties, Electrical Resistance, Tracking Resistant, High Gas Permeability, Good Mechanical Properties
End Uses:
Dielectric Films
Color:
Transparent
Tensile Strength:
6.0 - 6.0 MPa
ELASTOSIL® Film 2030 is a high-precision silicone film made from cross-linked silicone rubber. The film shows a maximum thickness variation across the total width of less than ±5%. The precision allows for constant electrical resistance and good comparative tracking resistance across a broad range of temperatures.
Wacker Chemie AG
SEMICOSIL® 9981 TC
Application Area:
Power Control Unit (PCU), Electric Vehicle (EV) Batteries, Sensors
Features:
Electrically Conductive, Good Thermal Stability, Screen Printable, Good Thermal Conductivity
Chemical Family:
Silicones
SEMICOSIL® 9981 TC is a one-part, thermally conductive paste with electrical conductivity that cures into a gap-filling silicone. The thermal paste efficiently fills the finest gaps of heat-generating and ablating substrates, minimizing contact resistance. The thermal resistance is minimized due to an exceptional thermal conductivity of 10 W/mK, in combination with the possibility of reducing bond line thickness to 10 μm.
SABIC's Specialties Business
LNP™ STAT-KON™ Compound ZJK20I
Polymer Name:
PPO/PS Alloy
Processing Methods:
Injection Molding
Density:
1150.0 - 1150.0 kg/m³
Flexural Modulus:
4020.0 - 4020.0 MPa
SABIC's Specialties Business LNP™ STAT-KON™ ZJK20I is a static dissipative CNT compound based on polyphenylene ether (PPE) + polystyrene (PS) resin with low particulate count and good high heat properties. This material is an excellent candidate for IC tray, Wafer cassette and Slider tray parts in the semiconductor industry.
Wacker Chemie AG
SEMICOSIL® 962 TC A/B
Application Area:
Power Control Unit (PCU), Electric Vehicle (EV) Batteries, Sensors
Features:
Tacky, Bleed Resistant, Soft, Good Stability, Good Thermal Conductivity, Abrasion Resistant
Chemical Family:
Silicones
SEMICOSIL® 962 TC A/B is a gap filler paste material with excellent thermal conductivity. It is a two-part silicone rubber that is shear-thinning, easy to dispense, and non-slump. This addition-curing formulation cures at room temperature, resulting in a soft, flexible, and tacky rubber with outstanding thermal conductivity properties.
Wacker Chemie AG
SEMICOSIL® 9671 TC2 A/B
Application Area:
Power Control Unit (PCU), Electric Vehicle (EV) Batteries, Sensors
Features:
Low Stress, Tacky, Bleed Resistant, Thermally Conductive, Low Density, Soft, Good Thermal Conductivity, Low Volatility
Chemical Family:
Silicones
SEMICOSIL® 9671 TC2 A/B is a thermal conductive gap filler silicone material used in heat sink applications for the electronics industry. It is a shear-thinning, easy-dispensing, non-slump, addition-curing, two-part silicone rubber that cures at room temperature. This material is specifically designed to enhance heat dissipation and provide efficient thermal management in electronic devices. SEMICOSIL® 9671 TC2 A/B is ideal for filling gaps and ensuring effective heat transfer in heat sink applications.
SABIC's Specialties Business
LNP™ LUBRICOMP™ Compound UCL36ASP
Polymer Name:
Polyphthalamide (PPA)
Processing Methods:
Injection Molding
Fillers Included:
PTFE, Carbon Fiber
Additives Included:
Mold Release Agent, Lubricant (Unspecified), Lubricant (PTFE), Heat Stabilizer
Flexural Modulus:
19900.0 - 19900.0 MPa
SABIC's Specialties Business LNP LUBRICOMP UCL36ASP compound is based on Polyphthalamide (PPA) resin containing 30% carbon fiber and 15% PTFE. Added features of this grade include: Internally Lubricated, Electrically Conductive, Heat Stabilized, Wear Resistant.
SABIC's Specialties Business
LNP™ LUBRICOMP™ Compound UFL36AS
Polymer Name:
Polyphthalamide (PPA)
Processing Methods:
Injection Molding
Fillers Included:
PTFE, Glass Fiber
Additives Included:
Mold Release Agent, Lubricant (Unspecified), Lubricant (PTFE), Heat Stabilizer
Flexural Modulus:
10100.0 - 10100.0 MPa
SABIC's Specialties Business LNP LUBRICOMP UFL36AS compound is based on Polyphthalamide (PPA) resin containing 30% glass fiber, 15% PTFE. Added features of this grade include: Heat Stabilized, Internally Lubricated, Wear Resistant.
Wacker Chemie AG
SEMICOSIL® 9672 TC
Application Area:
Power Control Unit (PCU), Electric Vehicle (EV) Batteries, Sensors
Features:
Tacky, Bleed Resistant, Low Density, Soft, Good Thermal Conductivity, Low Volatility
Chemical Family:
Silicones
SEMICOSIL® 9672 TC is a thermally conductive gap filler silicone material designed for heat sink applications in the electronics industry. It is a shear-thinning, non-slump, two-part silicone gel that cures at room temperature to a soft gel with excellent thermal conductivity.
CHT Group
CHT Group QGel 311
Product Type:
Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:
Sensors, Passenger Protection System, Control Units, ADAS (Advanced Driver Assistance Systems), Driving Support System
Cure Method:
Chemical Cure, Air Dry
Chemical Family:
Silicones
CHT Group QGel 311 is a clear, soft, moderately cross-linked, general-purpose, addition-cure silicone gel polymer. This silicone gel provides protection from moisture, vibration, thermal, or mechanical shocks. It is a fast-curing, inhibition-resistant gel that is commonly used in a variety of electronic applications.
CHT Group
CHT Group TufGel 330
Product Type:
Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:
Sensors, Passenger Protection System, Control Units, ADAS (Advanced Driver Assistance Systems), Battery Management System (BMS), Electric Vehicle (EV) Batteries, Driving Support System
Cure Method:
Chemical Cure
Chemical Family:
Silicones
CHT Group TufGel 330 is one of a family of soft, adherent, silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low-viscosity, two-component system that is readily mixed in a 1:1 ratio. It is used to provide protection from vibration, thermal or mechanical shock, water, and many other environmental contaminants. This product has excellent dielectric properties.
CHT Group
CHT Group QSil 223
Product Type:
Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:
Sensors, Aerospace Applications, LEDs, Optical Applications
Cure Method:
Chemical Cure
Chemical Family:
Silicones
CHT Group QSil 223 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.
CHT Group
CHT Group QSil 214
Product Type:
Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:
Sensors, Aerospace Applications, LEDs, Optical Applications
Cure Method:
Chemical Cure, Air Dry
Chemical Family:
Silicones
CHT Group QSil 214 is a transparent and colorless silicone formulation that is ideal for optical applications. Its viscosity profile enables excellent flow around components, and it is excellent for potting complex parts. The chemical composition results in a cured product that is hydrolytically stable as well as reversion-resistant. The silicone elastomer provides electrical insulation and physical shock resistance for components and enables environmental protection.
Wacker Chemie AG
ELASTOSIL® Film 2030 Sheet 250/50
Polymer Name:
Silicone Elastomer
Physical Form:
Film
Features:
High Dielectric Strength, Tracking Resistant, High Gas Permeability, Good Mechanical Properties, High Temperature Resistance, High Specific Resistivity, Low Temperature Flexibility, High Optical Transparency, Electrical Resistance
ELASTOSIL® Film 2030 Sheet 250/50 is a high-precision silicone film made from cross-linked silicone rubber. The film shows a maximum thickness variation across the total width of less than ±5%. The precision allows for constant electrical resistance and good comparative tracking resistance across a broad range of temperatures.
CHT Group
CHT Group AS1707
Product Type:
Solvent free (100% Solids) Sealant, 1K (1 component) Sealant
Application Area:
Automotive Converter, Sensors, Electronic Control Units, Passenger Protection System, PTC Heater, Electric Motors, EV Charging Stations, Battery Management System (BMS), Driving Support System, Inverter, Brake System, On-board Charger, Aerospace Applications, Control Units, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries
Cure Method:
Moisture Cure
Application Method:
Gun
Chemical Family:
Silicones
CHT Group AS1707 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.
CHT Group
CHT Group AS1740
Chemical Family:
Silicones
Product Type:
1K (1 component) Sealant, Potting Compound
Cure Method:
Moisture Cure
Application Area:
ADAS (Advanced Driver Assistance Systems), Aerospace Applications, On-board Charger, EV Charging Stations, Driving Support System, Control Units, Inverter, Automotive Converter, Electric Motors, Brake System, Battery Management System (BMS), Passenger Protection System, Fiber Optic Cables, Compressors, Sensors
Application Method:
Gun
Compatible Substrates & Surfaces:
Aluminum, Steel, Metal, Copper, Composites, Brass
CHT Group AS1740 is part of a range of high-performance RTVs. It is a neutral cure silicone sealant specifically designed to meet the physical, chemical, and temperature resistance requirements of MIL-A-46146B. It features exceptional physical properties and is compatible with many sensitive substrates, including copper, brass, steel, aluminum, and FR4, making this an ideal option for many electronic applications where high performance is paramount. The alkoxy cure system produces a silicone sealant with excellent adhesion to most common substrates.
CHT Group
CHT Group SilSo Bond 14000
Product Type:
Solvent free (100% Solids) Sealant, 1K (1 component) Sealant
Application Area:
Control Units, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries, Automotive Converter, Sensors, Gaskets, Passenger Protection System, PTC Heater, Electric Motors, EV Charging Stations, Battery Management System (BMS), LEDs, Driving Support System, Electrical Components, Inverter, Seals, Brake System, Air Circulation System, On-board Charger
Compatible Substrates & Surfaces:
Metal, Polycarbonate (PC), Copper
Cure Method:
Air Dry, Moisture Cure
Application Method:
Gun
Chemical Family:
Silicones
CHT Group SilSo Bond 14000 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of alkoxy cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.
CHT Group
CHT Group AS1803
Product Type:
Solvent free (100% Solids) Sealant, 1K (1 component) Sealant
Application Area:
Automotive Converter, Sensors, Passenger Protection System, PTC Heater, Electric Motors, EV Charging Stations, Battery Management System (BMS), LEDs, Driving Support System, Inverter, Brake System, On-board Charger, Aerospace Applications, Control Units, ADAS (Advanced Driver Assistance Systems), Electric Vehicle (EV) Batteries
Cure Method:
Air Dry, Moisture Cure
Application Method:
Gun
Chemical Family:
Silicones
CHT Group AS1803 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.
CHT Group
CHT Group AS1821
Chemical Family:
Silicones
Product Type:
1K (1 component) Sealant, Potting Compound, Solvent free (100% Solids) Sealant
Cure Method:
Air Dry, Moisture Cure
Application Area:
ADAS (Advanced Driver Assistance Systems), On-board Charger, EV Charging Stations, Driving Support System, Control Units, Inverter, Connectors, Automotive Converter, Electric Motors, Brake System, Battery Management System (BMS), Passenger Protection System, Compressors, Sensors
Application Method:
Gun
CHT Group AS1821 is a non-corrosive, neutral-cure, 1-part, RTV (Room Temperature Vulcanizing) silicone adhesive sealant. It is one in a range of acetone-cure products that are solvent-free. It exhibits excellent primerless adhesion to many substrates and cures rapidly at room temperature to form a tough rubber when in contact with atmospheric moisture. This product will not corrode copper or its alloys and is suitable for use with electronic components.
Envalior
Arnite® TV4 230 SF
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
6600.0 - 6600.0 MPa
Arnite® TV4 230 SF is a high-performance engineering plastic celebrated for its impressive combination of high strength, rigidity, and excellent processing characteristics. These attributes make it highly suitable for a wide variety of applications in the automotive, electrical and electronics, and consumer goods sectors.
Envalior
Stanyl® TW271B6
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber
Additives Included:
Heat Stabilizer, Lubricant (PTFE)
Flexural Modulus:
22000.0 - 22000.0 MPa
Stanyl® TW271B6 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heat stabilized, wear modified, and friction modified.
Envalior
Stanyl® TW341-FC
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer, Lubricant (Unspecified), Lubricant (PTFE)
Flexural Modulus:
3000.0 - 3000.0 MPa
Stanyl® TW341-FC is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.
Envalior
Stanyl® TW241B3
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber
Additives Included:
Heat Stabilizer, Lubricant (Unspecified)
Flexural Modulus:
11500.0 - 11500.0 MPa
Stanyl® TW241B3 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heated, stabilized, and lubricated.
Envalior
ForTii® F11
Polymer Name:
Polyphthalamide (PPA)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
11000.0 - 11000.0 MPa
ForTii® F11 is a breakthrough high-temperature polyamide that offers halogen-free and halogen-containing flame retardant grades, making it suitable for demanding applications in industries such as electronics, lighting, automotive, white goods, industrial, and aerospace. It provides an excellent balance of flow, toughness, and stiffness, enabling the production of thin walls or complex geometries in electronics and electrical applications. The material is VDE (Verband der Elektrotechnik) approved for all colors, has a high RTI electrical rating of 140 °C at 0.75 mm, and a CTI rating of 800 V, ensuring thermal and electrical performance. It is phosphorous-free and VDE-certified. The processing technology for this product is injection molding.
Envalior
Arnite® TV4 230
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
5600.0 - 5600.0 MPa
Arnite® TV4 230 is a high-performance engineering plastic celebrated for its impressive combination of high strength, rigidity, and excellent processing characteristics. These attributes make it well-suited for a wide spectrum of applications in the automotive, electrical and electronics, and consumer goods sectors.
Envalior
Stanyl® TW241F12
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Heat Stabilizer
Flexural Modulus:
17000.0 - 17000.0 MPa
Stanyl® TW241F12 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include good or high flow and heat stabilization.
Envalior
Arnite® TV4 260 SXF
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Arnite® TV4 260 SXF is a high-performance engineering plastic known for its impressive combination of high strength, rigidity, and excellent processing characteristics. These qualities make it well-suited for a wide variety of applications in the automotive, electrical, electronic, and consumer goods sectors.
Envalior
EcoPaXX® Q-HG6
Polymer Name:
Polyamide 410 (PA 410)
Chemical Family:
Polyamides
Reinforcement Material:
Glass Fibers
Additives Included:
Heat Stabilizer
Fillers Included:
Glass Fiber
Processing Methods:
Injection Molding
EcoPaXX® Q-HG6 is a long aliphatic polyamide with excellent chemical and hydrolysis resistance. It is suitable for thermal management applications and other structural parts. It offers exceptional chemical resistance, low moisture absorption, a very high melting point, and a high crystallization rate. The material can be processed using injection molding technology. It is heat stabilized and contains 30% glass reinforcement.
Envalior
Arnite® TZ6 280 (BK22003)
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Ball, Glass Bead, Glass Fiber
Flexural Modulus:
8800.0 - 8800.0 MPa
Arnite® TZ6 280 (BK22003) is a high-performance engineering plastic that offers an excellent balance of strength, rigidity, and processing characteristics. It is suitable for various applications in industries such as automotive, electrical, electronics, and consumer goods. The recommended processing technology for Arnite® TZ6 280 (BK22003) is injection molding.
Envalior
Stanyl® TW213F2
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Heat Stabilizer
Stanyl® TW213F2 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include heat stabilization.
Envalior
Arnite® AV2 390
Polymer Name:
Polyethylene Terephthalate (PET)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
17500.0 - 17500.0 MPa
Arnite® AV2 390 is a high-performance engineering plastic that combines high strength and rigidity with excellent processing characteristics. As a result, it is well suited for a broad range of automotive, electrical, electronics, and consumer goods applications. The processing technology is best suited for injection molding.
Envalior
Stanyl® TW271B3
Polymer Name:
Polyamide 46 (PA 46)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber
Additives Included:
Heat Stabilizer, Lubricant (PTFE)
Flexural Modulus:
12000.0 - 12000.0 MPa
Stanyl® TW271B3 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include being heat stabilized, wear modified, and friction modified.
Show
36
of 520 results
Go to page
1
2
3
4
5
6
7
8
9
10