Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Electrical & Electronics
Parts & Components
Terminal Blocks, Plugs & Sockets
Products in Terminal Blocks, Plugs & Sockets
733 Products found in Terminal Blocks, Plugs & Sockets
Filters
Product Families
Suppliers
Functions
End Uses
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
MOCOM Compounds
ALFATER® XL A75I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
Density:
930.0 - 930.0 kg/m³
Certifications & Compliance:
ISO 45001, ISO 14001, RoHS Compliant, Directive 2011/65/EC amended through EU/2015/863 (RoHS), REACH (UK), SVHC Compliant, ISO 13485, ISO 50001, EC No.1907/2006, REACH (Europe), ISO 9001, ISO 17025, IATF 16949
Tear Strength:
38.0 - 38.0 kN/m
MOCOM Compounds ALFATER® XL A75I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer used in a variety of markets such as automotive, building and construction, electrical and electronic, machinery, and furniture. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is typically used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components.
MOCOM Compounds
ALFATER® XL A55I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
Density:
940.0 - 940.0 kg/m³
CAS Number:
52255-49-9
Tear Strength:
22.0 - 22.0 kN/m
Labeling Claims:
Azo Colorants-free, PAH-free, PFOS-free, PFOA-free, Persistent Organic Pollutants (POP)-free, Conflict minerals-free, Azo Dyes-free
MOCOM Compounds ALFATER® XL A55I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) suitable for pre-drying conditions in a dry air (dessiccant) dryer with temperatures of 70-80°C for 2-4 hours with a maximum moisture content of <0.10%. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is used mainly in the injection molding process with melt temperatures of 195-230°C, mold temperatures of 10-60°C, high injection speed, and back pressure (hydraulic) >5 bar and holding pressure 50-70% of injection pressure. It is used in automotive, building and construction, electrical and electronic, machinery, and furniture applications for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners, and connectors, 2K components.
MOCOM Compounds
TEDUR® L 9105-1
Polymer Name:
Polyphenylene Sulfide (PPS)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
10500.0 - 10500.0 MPa
MOCOM Compounds TEDUR® L 9105-1 is a Polyphenylene Sulfide base polymer with 30% glass fiber filler/additive system. It is designed for automotive and machinery applications and is known for its high toughness and stiffness. During processing with injection molding, the melt temperature should be between 320-340°C, and the mold temperature should be greater than 140°C.
MOCOM Compounds
ALFATER® XL A50I 2GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding, Injection Blow Molding, Extrusion
Density:
930.0 - 930.0 kg/m³
Labeling Claims:
Persistent Organic Pollutants (POP)-free, Conflict minerals-free, PFOA-free, Azo Dyes-free, Azo Colorants-free, PAH-free, PFOS-free
Tear Strength:
16.0 - 16.0 kN/m
Certifications & Compliance:
IATF 16949, ISO 13485, RoHS Compliant, ISO 50001, REACH (UK), EC No.1907/2006, ISO 17025, REACH (Europe), Directive 2011/65/EC amended through EU/2015/863 (RoHS), ISO 9001, ISO 14001, ISO 45001, SVHC Compliant
MOCOM Compounds ALFATER® XL A50I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with natural color and black color that is used for injection molded parts. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance and hydrolysis resistance. The black color meets the requirements for weathering dry, hot (Kalahari, PV3929) and weathering moist, hot (Florida, PV3930). ALFATER® XL A50I 2GP0000 is used in the market segments of automotive, building and construction, electrical and electronic, machinery, and furniture and its application areas are injection molded parts. Typical applications are seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, plugs, fastener & connector, and 2K components. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer and thermoplastic elastomer general. It is widely used across industry applications and provides a great combination of properties.
MOCOM Compounds
ALTECH® ECO PC 1000/141 FR
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Functions:
Resin
Additives Included:
UV Stabilizer, Flame Retardant, Impact Modifier
Chemical Family:
Polycarbonate (PC)
Labeling Claims:
Azo Colorants-free, Persistent Organic Pollutants (POP)-free, Conflict minerals-free, Azo Dyes-free, PFOS-free, PFOA-free
Certifications & Compliance:
ISO 9001, IATF 16949, SVHC Compliant, REACH (Europe), Directive 2011/65/EC amended through EU/2015/863 (RoHS), ISO 17025, ISO 45001, EC No.1907/2006, REACH (UK), ISO 50001, ISO 13485, RoHS Compliant, ISO 14001
MOCOM Compounds ALTECH® ECO PC 1000/141 FR is a polycarbonate base polymer with special features such as UV stabilization, easy release (demolding), and flame retardant impact modification. It is suitable for pre-drying conditions in an air circulating dryer at 100-120°C for 4-12 hours, or 120°C in a dry air (dessiccant) dryer for 2-3 hours, dependent on the moisture content with a maximum moisture content of 0.02%. It can be used for applications in the electrical and electronic, lighting, and various markets such as housings, security engineering parts, sockets, plugs/connectors, and various others.
MOCOM Compounds
ALFATER® XL A70I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
Density:
930.0 - 930.0 kg/m³
Labeling Claims:
Conflict minerals-free, PFOS-free, PAH-free, PFOA-free, Azo Dyes-free, Azo Colorants-free, Persistent Organic Pollutants (POP)-free
Tear Strength:
29.0 - 29.0 kN/m
Features:
Good Weather Stability, Excellent Hydrolysis Resistance, Soft Touch, Hot Air Resistant, Ozone Resistant, Hydrolysis Resistant, Chemical Resistant, Soft, Flexible
MOCOM Compounds ALFATER® XL A70I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) with natural color, black and has good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for injection molding with a melt temperature of 195-230°C and a mold temperature of 10-60°C, making it suitable for a wide range of applications, such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
Alcom® TCD PA66 5050 14016
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Fillers Included:
Proprietary
Additives Included:
Heat Stabilizer
Flexural Modulus:
10500.0 - 10500.0 MPa
MOCOM Compounds Alcom® TCD PA66 5050 14016 is a thermal conductive and electrically insulating polyamide 66 material that is heat stabilized. It is used in a variety of market segments including automotive, machinery, electrical and electronic, and lighting. Typical applications include radiator systems, cooling systems, housings, functional components, plugs/connectors, and lamp sockets.
MOCOM Compounds
ALTECH® ECO PC 1000/542 FR UV
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Functions:
Resin
Chemical Family:
Polycarbonate (PC)
Additives Included:
Flame Retardant, UV Stabilizer
Features:
UV Stabilized, Flame Retardant, UV Resistant, Good Mold Release
MOCOM Compounds ALTECH® ECO PC 1000/542 FR UV is a polycarbonate base polymer with special features including UV stabilization, easy release (demolding), and flame retardant. It contains recycled material and is suitable for electrical and electronic applications, such as housings, plugs/connectors, and functional components.
MOCOM Compounds
Alcom® TCD PA6 5060 FR 15090
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Fillers Included:
Proprietary, Mineral
Additives Included:
Flame Retardant, Heat Stabilizer
Flexural Modulus:
9500.0 - 9500.0 MPa
MOCOM Compounds Alcom® TCD PA6 5060 FR 15090 is a polyamide 6 (PA6) material that contains a special filler system, making it thermally conductive, electrically insulating, and halogen-free flame retardant. It is also opaque and heat stabilized, making it suitable for use in radiator systems and cooling systems in the automotive, machinery, electrical and electronic, and lighting industries.
MOCOM Compounds
Alcom® TCD PA6 5070 FR 15021
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Fillers Included:
Proprietary, Mineral
Additives Included:
Flame Retardant, Heat Stabilizer
Flexural Modulus:
15000.0 - 15000.0 MPa
MOCOM Compounds Alcom® TCD PA6 5070 FR 15021 is a polyamide 6-based polymer with a special filler that makes it thermally conductive, electrically insulating, heat stabilized, and halogen-free flame retardant. It is suitable for a variety of markets such as Automotive, Machinery, electrical and electronic, and Lighting, and is particularly ideal for radiator systems and cooling systems. Typical applications include housings, functional components, plugs/connectors, and lamp sockets.
MOCOM Compounds
ALTECH® ECO PC+ASA 1000/506
Polymer Name:
PC/ASA Alloy
Functions:
Resin
Processing Methods:
Injection Molding
Density:
1260.0 - 1260.0 kg/m³
Labeling Claims:
Azo Colorants-free, Conflict minerals-free, Recycled, PFOS-free, PFOA-free, Persistent Organic Pollutants (POP)-free, Azo Dyes-free
Flexural Modulus:
2600.0 - 2600.0 MPa
Features:
Processing Stability
MOCOM Compounds ALTECH® ECO PC+ASA 1000/506 is a polycarbonate + Acrylonitrile Styrene Acrylate Blend that has been processing stabilized and contains recycled material. It is suitable for electrical and electronic applications such as sockets, plugs/connectors, and various others. Pre-drying conditions should be followed as in an air circulating dryer at 100-110°C for 3-6 hours, or in a dry air (dessiccant) dryer at 100-110°C for 2-4 hours. For injection molding, the melt temperature should be 250-290°C, and the mold temperature should be 60-100°C. This product should be stored in a cool, dark place to protect it from light.
MOCOM Compounds
ALFATER® XL A40I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding, Injection Blow Molding
Density:
930.0 - 930.0 kg/m³
Features:
Hot Air Resistant, Hydrolysis Resistant, Ozone Resistant, Good Weather Stability, Flexible, Excellent Hydrolysis Resistance, Soft, Soft Touch, Chemical Resistant
End Uses:
Construction Applications, Sealing Lip, Plugs, Furniture, Cable Ducts, Connectors, Seals, Automotive Applications, Soft Touch Applications, Machine/Mechanical Parts, Automotive Exterior Parts, Electrical/Electronic Applications, Fasteners, Protective Caps, Handles, Automotive Interior Parts, Shock Absorbers
Tear Strength:
13.0 - 13.0 kN/m
MOCOM Compounds ALFATER® XL A40I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with natural color and black options. It has good recovery, weathering, chemical, ozone, hot air, and hydrolysis resistant properties. It is best suited for injection molded parts, seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer.
MOCOM Compounds
ALFATER® XL A35I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
Density:
940.0 - 940.0 kg/m³
CAS Number:
9004-74-4
Tear Strength:
12.0 - 12.0 kN/m
MOCOM Compounds ALFATER® XL A35I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with a natural color and is best suited for injection molding. It is used for applications such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for use in a variety of industries including automotive, building and construction, electrical and electronic, machinery, furniture, and other industries.
MOCOM Compounds
TEDUR® R 9519
Polymer Name:
Polyphenylene Sulfide (PPS)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
14000.0 - 14000.0 MPa
MOCOM Compounds TEDUR® R 9519 is a special injection molding grade containing 45% glass fibers and recycled material, making it suitable for applications such as fixing elements and lamp sockets. Pre-drying is required in a dry air (desiccant) dryer at 130-140°C for 2-4 hours, depending on the moisture content. During processing, injection molding should be done with a melt temperature of 320-340°C and a mold temperature of at least 140°C.
MOCOM Compounds
ALCOM® LB ECO PC 1000 17157 FR IM WT2083-07
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Additives Included:
UV Stabilizer, Impact Modifier, Flame Retardant
MOCOM Compounds ALCOM® LB ECO PC 1000 17157 FR IM WT2083-07 is a polycarbonate base polymer with special features including impact modification, UV stabilization, flame retardancy, and containing recycled material. It is suitable for electrical and electronic, lighting applications such as light guides, lamps, sockets, and various other applications. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, 120°C in an air circulating dryer for 4-12 hours, and maximum moisture content should be <0.02%. For injection molding, the melt temperature should be 270-310°C and the mold temperature should be 80-110°C.
MOCOM Compounds
ALTECH® ECO PC 1000/141
Polymer Name:
Polycarbonate (PC)
Functions:
Resin
Processing Methods:
Injection Molding
Chemical Family:
Polycarbonate (PC)
Labeling Claims:
PFOS-free, Persistent Organic Pollutants (POP)-free, Conflict minerals-free, PFOA-free, Azo Dyes-free, Azo Colorants-free
Additives Included:
UV Stabilizer, Flame Retardant, Impact Modifier
Features:
UV Resistant, Good Mold Release, Impact Modified, UV Stabilized, Flame Retardant
MOCOM Compounds ALTECH® ECO PC 1000/141 is a polycarbonate base polymer that offers UV stabilization, easy release (demolding), flame retardant, and impact modified properties for injection molded parts in the electrical and electronic, lighting, and various markets. It is recommended to pre-dry the material before processing. For injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.
MOCOM Compounds
ALFATER® XL A60I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding, Injection Blow Molding
Density:
940.0 - 940.0 kg/m³
Features:
Hot Air Resistant, Hydrolysis Resistant, Ozone Resistant, Good Weather Stability, Flexible, Excellent Hydrolysis Resistance, Soft, Soft Touch, Chemical Resistant
End Uses:
Construction Applications, Sealing Lip, Plugs, Furniture, Cable Ducts, Connectors, Seals, Automotive Applications, Soft Touch Applications, Machine/Mechanical Parts, Automotive Exterior Parts, Casters, Electrical/Electronic Applications, Fasteners, Protective Caps, Handles, Automotive Interior Parts, Shock Absorbers
Tear Strength:
22.0 - 22.0 kN/m
MOCOM Compounds ALFATER® XL A60I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) base polymer that is used for injection molding applications. It is available in natural color or black and has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Typical applications include seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners and connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
ALFATER® XL A90I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
End Uses:
Construction Applications, Casters, Soft Touch Applications, Protective Caps, Connectors, Automotive Interior Parts, Machine/Mechanical Parts, Electrical/Electronic Applications, Automotive Applications, Handles, Automotive Exterior Parts, Furniture, Sealing Lip, Seals, Plugs, Fasteners, Shock Absorbers, Cable Ducts
Density:
950.0 - 950.0 kg/m³
Tear Strength:
48.0 - 48.0 kN/m
Features:
Chemical Resistant, Soft, Soft Touch, Flexible, Excellent Hydrolysis Resistance, Hot Air Resistant, Ozone Resistant, Good Weather Stability
MOCOM Compounds ALFATER® XL A90I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) that is used for injection molding. It has excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connector, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
ALCOM® LD2 PC 1000 17150 UV GY2240-08
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Additives Included:
UV Stabilizer, Impact Modifier
Flexural Modulus:
2450.0 - 2450.0 MPa
MOCOM Compounds ALCOM® LD2 PC 1000 17150 UV GY2240-08 is a polycarbonate base polymer with special features such as impact modification, UV stabilization, and the inclusion of recycled material with light scattering capabilities. It is used in electrical and electronic, lighting, and various exterior parts, fixtures/fittings, and electrical component applications such as housings, lamps, sockets, and more.
MOCOM Compounds
ALFATER® XL D40I 2GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding, Injection Blow Molding, Extrusion, Coextrusion
Density:
960.0 - 960.0 kg/m³
CAS Number:
54116-08-4
Tear Strength:
76.0 - 76.0 kN/m
Labeling Claims:
PAH-free, PFOS-free, PFOA-free, Azo Colorants-free, Persistent Organic Pollutants (POP)-free, Conflict minerals-free, Azo Dyes-free
Certifications & Compliance:
ISO 17025, RoHS Compliant, IATF 16949, ISO 50001, ISO 14001, REACH (UK), ISO 13485, SVHC Compliant, ISO 9001, REACH (Europe), ISO 45001, Directive 2011/65/EC amended through EU/2015/863 (RoHS), EC No.1907/2006
MOCOM Compounds ALFATER® XL D40I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, weathering resistance, chemical resistance, ozone resistance, and hot air resistance. It is suitable for injection molding and extrusion processes, with melt temperatures of 190-230°C and 200-240°C respectively, and mold temperatures of 10-70°C. Additionally, it has good adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general. It is mainly used in the automotive, building and construction, electrical and electronic, machinery, and furniture industries, and is typically applied to seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, profiles, cable jacketing, conduits, and 2K components.
MOCOM Compounds
ALCOM® LB ECO PC 1000 17152 UV IM WT2083-07
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Additives Included:
UV Stabilizer, Impact Modifier
MOCOM Compounds ALCOM® LB ECO PC 1000 17152 UV IM WT2083-07 is a polycarbonate base polymer, which is impact modified, UV stabilized, and contains recycled material. It is suitable for electrical and electronic, lighting, and various other applications such as light guides, lamps, sockets, etc. It can be processed through injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C.
MOCOM Compounds
ALFATER® XL A80I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding, Injection Blow Molding
Density:
950.0 - 950.0 kg/m³
Tear Strength:
36.0 - 36.0 kN/m
MOCOM Compounds ALFATER® XL A80I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer with natural color or black color, designed for injection molding applications. It has excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for automotive, building and construction, electrical and electronic, machinery, furniture, and injection molded parts, such as seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connectors, and 2K components.
MOCOM Compounds
ALTECH® ECO PC 1000/141 FR IM
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Functions:
Resin
Chemical Family:
Polycarbonate (PC)
Features:
UV Resistant, UV Stabilized, Flame Retardant, Impact Modified, Good Mold Release
Additives Included:
UV Stabilizer, Flame Retardant, Impact Modifier
End Uses:
Housings, Sockets, Electrical/Electronic Applications, Connectors, Plugs
MOCOM Compounds ALTECH® ECO PC 1000/141 FR IM is a polycarbonate base polymer with features like UV stabilization, easy release, flame retardance, and impact modification. It is widely used in injection molded parts such as housings, security engineering parts, sockets, plugs, and connectors for the electrical and electronic and lighting industries.
MOCOM Compounds
ALFATER® XL A65I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
Density:
940.0 - 940.0 kg/m³
CAS Number:
123-11-5
Tear Strength:
25.0 - 25.0 kN/m
MOCOM Compounds ALFATER® XL A65I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It can be adhered to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. It has excellent durability and performance.
MOCOM Compounds
ALFATER® XL A60I 2UV0000 UV
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Additives Included:
UV Stabilizer
End Uses:
Construction Applications, Casters, Soft Touch Applications, Protective Caps, Connectors, Automotive Interior Parts, Machine/Mechanical Parts, Electrical/Electronic Applications, Automotive Applications, Handles, Automotive Exterior Parts, Furniture, Sealing Lip, Seals, Plugs, Fasteners, Shock Absorbers, Cable Ducts
Density:
930.0 - 930.0 kg/m³
Tear Strength:
30.0 - 30.0 kN/m
Features:
Chemical Resistant, Soft, Soft Touch, UV Stabilized, Flexible, Excellent Hydrolysis Resistance, UV Resistant, Hot Air Resistant, Ozone Resistant, Good Weather Stability
MOCOM Compounds ALFATER® XL A60I 2UV0000 UV is a thermoplastic vulcanisate (PP+EPDM) with natural color and UV stabilization, suitable for injection molding. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, making it suitable for applications such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners and connectors, and 2K components. Additionally, it has excellent adhesion to various materials.
MOCOM Compounds
ALTECH® ECO PC 2030/200 GF30
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Functions:
Resin
Fillers Included:
Glass Fiber
Chemical Family:
Polycarbonate (PC)
MOCOM Compounds ALTECH® ECO PC 2030/200 GF30 is a polycarbonate base polymer containing 30% glass fibers and recycled material, suitable for applications such as plugs/connectors, housings, and other household goods and energy management. To ensure optimal performance, pre-drying conditions require a dry air (dessiccant) dryer at 100-120°C for 2-3 h, or an air circulating dryer at 100-120°C for 4-12 h depending on moisture content, with a maximum moisture content of <0.02%.
MOCOM Compounds
ALFATER® XL A65I 2GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Extrusion, Injection Molding
CAS Number:
14433-76-2
Density:
900.0 - 900.0 kg/m³
Tear Strength:
26.0 - 26.0 kN/m
Labeling Claims:
Azo Dyes-free, Persistent Organic Pollutants (POP)-free, Azo Colorants-free, PFOA-free, PFOS-free, PAH-free, Conflict minerals-free
MOCOM Compounds ALFATER® XL A65I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) polymer suitable for injection molding. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. Its market segment includes automotive, building and construction, electrical and electronic, machinery, and furniture, and its applications include injection molded parts, seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, protection caps, cable ducts, casters, plugs, fastener & connector, and 2K components.
MOCOM Compounds
ALTECH® ECO PC 1000/121 UV IM
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Functions:
Resin
Chemical Family:
Polycarbonate (PC)
Features:
UV Resistant, UV Stabilized, Impact Modified
Additives Included:
UV Stabilizer, Impact Modifier
End Uses:
Housings, Electrical Components, Sockets, Electrical/Electronic Applications, Fittings, Lamps, Fixtures
MOCOM Compounds ALTECH® ECO PC 1000/121 UV IM is a polycarbonate-based impact-modified, UV-stabilized plastic containing recycled material. It is suitable for the electrical and electronic, lighting, and various market segments and is typically used to produce housings, lamps, sockets, and various exterior parts and fixtures/fittings.
MOCOM Compounds
ALTECH® PA66 A 1000/517.01 IM
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Functions:
Resin
Chemical Family:
Polyamides
Additives Included:
Heat Stabilizer
Flexural Modulus:
2450.0 - 2450.0 MPa
Features:
Heat Stabilized, Good Mold Release, Good Flow
MOCOM Compounds ALTECH® PA66 A 1000/517.01 IM is a heat-stabilized, easy-release, and easy-flow polyamide 66 that is adhesion-modified to PVC. It is commonly used in applications such as plugs/connectors, housings, and various automotive powertrain parts in the automotive, electrical, and electronic market segments. For injection molding, the melt temperature should range between 270-290°C and the mold temperature between 40-80°C. The product should be stored in the dark and kept at no more than 30°C.
MOCOM Compounds
ALFATER® XL A75I 2GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding, Injection Blow Molding, Extrusion
Density:
960.0 - 960.0 kg/m³
Certifications & Compliance:
REACH (Europe), ISO 9001, ISO 17025, IATF 16949, ISO 45001, ISO 14001, RoHS Compliant, Directive 2011/65/EC amended through EU/2015/863 (RoHS), REACH (UK), SVHC Compliant, ISO 13485, ISO 50001, EC No.1907/2006
Tear Strength:
38.0 - 38.0 kN/m
MOCOM Compounds ALFATER® XL A75I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) material suitable for injection molding. It is suitable for use in the automotive, building and construction, electrical and electronic, machinery, and furniture industries, and can be used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
ALFATER® XL A85I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding, Injection Blow Molding
Density:
950.0 - 950.0 kg/m³
CAS Number:
68439-49-6
Labeling Claims:
Persistent Organic Pollutants (POP)-free, Conflict minerals-free, PFOA-free, Azo Dyes-free, Azo Colorants-free, PAH-free, PFOS-free
Tear Strength:
42.0 - 42.0 kN/m
Certifications & Compliance:
IATF 16949, ISO 13485, RoHS Compliant, ISO 50001, REACH (UK), EC No.1907/2006, ISO 17025, REACH (Europe), Directive 2011/65/EC amended through EU/2015/863 (RoHS), ISO 9001, ISO 14001, ISO 45001, SVHC Compliant
MOCOM Compounds ALFATER® XL A85I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, good weathering resistance, good chemical resistance, good ozone resistance, and good hot air resistance. It is suitable for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/ shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, 2K components, and casters. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. It is ideal for use in the automotive, building and construction, electrical and electronic, machinery, and furniture industries.
MOCOM Compounds
ALFATER® XL A55I 2GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Extrusion, Injection Molding
Density:
930.0 - 930.0 kg/m³
Features:
Soft Touch, Flexible, Hot Air Resistant, Soft, Hydrolysis Resistant, Good Weather Stability, Ozone Resistant, Excellent Hydrolysis Resistance, Chemical Resistant
Tear Strength:
22.0 - 22.0 kN/m
MOCOM Compounds ALFATER® XL A55I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a natural color, designed for injection molding. It has excellent recovery, weather resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for use in automotive, building and construction, electrical and electronic, machinery, furniture and injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/ shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. Furthermore, it is also capable of adhering to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
TEDUR® L 9511
Polymer Name:
Polyphenylene Sulfide (PPS)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
17000.0 - 17000.0 MPa
MOCOM Compounds TEDUR® L 9511 is a high-stiffness injection molding grade thermoplastic with a base polymer of Polyphenylene Sulfide and a filler/additive system of 45% glass fibers. Its exceptional stiffness makes it suitable for various applications, such as housings and fixing elements.
MOCOM Compounds
ALFATER® XL A90I 2GP0001
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
CAS Number:
64-02-8
Density:
950.0 - 950.0 kg/m³
Labeling Claims:
PFOA-free, Azo Dyes-free, Azo Colorants-free, Persistent Organic Pollutants (POP)-free, PAH-free, PFOS-free, Conflict minerals-free
Tear Strength:
50.0 - 50.0 kN/m
Certifications & Compliance:
EC No.1907/2006, ISO 17025, Directive 2011/65/EC amended through EU/2015/863 (RoHS), ISO 14001, ISO 45001, SVHC Compliant, ISO 50001, REACH (UK), REACH (Europe), ISO 9001, IATF 16949, ISO 13485, RoHS Compliant
End Uses:
Connectors, Plugs, Automotive Interior Parts, Cable Ducts, Seals, Handles, Furniture, Automotive Exterior Parts, Fasteners, Electrical/Electronic Applications, Shock Absorbers, Casters, Protective Caps, Automotive Applications, Sealing Lip, Construction Applications, Machine/Mechanical Parts, Soft Touch Applications
MOCOM Compounds ALFATER® XL A90I 2GP0001 is a polymeric material that is processed with injection molding. It is a thermoplastic vulcanisate (PP+EPDM) with a natural color or gray, and features good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications, and is used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fastener & connectors, and 2K components.
MOCOM Compounds
ALCOM® LB ECO PC 1000 17153 WT2687-16
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Additives Included:
UV Stabilizer, Impact Modifier, Flame Retardant
MOCOM Compounds ALCOM® LB ECO PC 1000 17153 WT2687-16 is a polycarbonate-based, impact modified, UV stabilized, and recycled material containing product, typically used in lighting, light blocking components, and various other applications such as light guides, lamps, and sockets. It should be processed with a melt temperature of 270-310°C and mold temperature of 80-110°C. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours, with a maximum moisture content of less than 0.02%.
MOCOM Compounds
ALFATER® XL D40I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding, Injection Blow Molding
Density:
960.0 - 960.0 kg/m³
Labeling Claims:
Azo Colorants-free, PAH-free, PFOS-free, PFOA-free, Azo Dyes-free, Persistent Organic Pollutants (POP)-free, Conflict minerals-free
Tear Strength:
75.0 - 75.0 kN/m
MOCOM Compounds ALFATER® XL D40I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) that is used in injection molding and is available in natural color and black. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery and furniture applications, and can be used for seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners, and connectors, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
Show
36
of 733 results
Go to page
1
2
3
4
5
6
7
8
9
10