ALFATER® XL A55I 2GP0050

Identification & Functionality

Fillers Included

Mineral

Polymer Name

PP/EPDM

Technologies

Elastomers

Product Families

Elastomers — Thermoplastic Elastomers

Thermoplastic Vulcanizates (TPV)

Features & Benefits

Labeling Claims

Azo Colorants-free,

Azo Dyes-free,

Conflict minerals-free,

PAH-free,

PFOA-free,

PFOS-free,

Persistent Organic Pollutants (POP)-free

Materials Features

Chemical Resistant,

Excellent Hydrolysis Resistance,

Flexible,

Good Weather Stability,

Hot Air Resistant,

Hydrolysis Resistant,

Ozone Resistant,

Soft,

Soft Touch

Applications & Uses

Markets

Automotive & Transportation,

Consumer Goods,

Electrical & Electronics

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Chassis & Brake

Electrical & Electronics — Devices & Assemblies

Consumer Electronics

Consumer Goods — Furniture

Electrical & Electronics — Parts & Components

Connectors,

Sensors & Actuators,

Terminal Blocks, Plugs & Sockets

Compatible Polymers & Resins

Polyethylenes (PE),

Polypropylene Copolymer,

Polypropylenes (PP),

Thermoplastic Elastomers (TPE),

Thermoplastic Polyolefins (TPO),

Thermoplastic Vulcanizates (TPV)

Plastics & Elastomers End Uses

Automotive Applications,

Cable Ducts,

Connectors,

Construction Applications,

Electrical/Electronic Applications,

Fasteners,

Furniture,

Handles,

Machine/Mechanical Parts,

Plugs,

Protective Caps,

Sealing Lip,

Seals,

Shock Absorbers,

Soft Touch Applications

Plastics & Elastomers Processing Methods

Injection Blow Molding,

Injection Molding

Properties

Color

Black

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Strength (Type 2)	5.0	MPa	ISO 37
Tear Strength (Method Ba)	22.0	kN/m	ISO 34-1
Elongation at Break (Type 2)	350.0	%	ISO 37
Shore Hardness A (15s)	55.0	—	ISO 868
Tensile Stress at 100% Elongation (Type 2)	2.1	MPa	ISO 37

Physical Properties

	Value	Units	Test Method / Conditions
Density	940.0	kg/m³	ISO 1183

Thermal Properties

	Value	Units	Test Method / Conditions
Compression Set (22h, at 70°C, 25%, Type A)	29.0	%	ISO 815
Compression Set (22h, at 100°C, 25%, Type A)	32.0	%	ISO 815
Compression Set (72h, at 22°C, 25%, Type A)	19.0	%	ISO 815
Compression Set (72h, at 125°C, 25%, Type A)	42.0	%	ISO 815

Typical Properties

	Value	Units	Test Method / Conditions
Service Temperature (depending on load, geometry, etc.)	- 40 to 125	°C	—
Moisture Content	max. 0.1	%	—

Flammability

	Value	Units	Test Method / Conditions
Glow Wire (GWFI, 750°C, 2mm)	Passed	—	DIN EN 60695

Processing Information (Injection Molding)

	Value	Units	Test Method / Conditions
Back Pressure (hydraulic)	min. 5	bar	—
Mould Temperature	10 - 60	°C	—
Melt Temperature	195 - 230	°C	—
Holding Pressure (of injection pressure)	50 - 70	%	—
Injection Speed	High	—	—

Rheological Properties

	Value	Units	Test Method / Conditions
Spiral Flow (2 mm wall thickness)	35.0	cm	—

Regulatory & Compliance

Certifications & Compliance

Directive 2011/65/EC amended through EU/2015/863 (RoHS),

EC No.1907/2006,

IATF 16949,

ISO 13485,

ISO 14001,

ISO 17025,

ISO 45001,

ISO 50001,

ISO 9001,

REACH (Europe),

REACH (UK),

RoHS Compliant,

SVHC Compliant

Technical Details & Test Data

Pre-Drying Conditions

In a dry air (dessiccant) dryer 70-80 °C for 2-4 h

Technical Data

Storage & Handling

Storage Conditions

Store in dry, tighlty sealed protected from light not above 30°C.