Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Tensile Modulus | 7700.0 | MPa | ISO 527 |
| Tensile Strength at Break | 95.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 2.5 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 35.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 8.5 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1430.0 | kg/m³ | ISO 1183 |
| Global Warming Potential (GWP) | 0.81 | kg CO₂ eq. | ISO 14040, 14044 |
| Value | Units | Test Method / Conditions | |
| HDT / A (1.8 MPa) | 138.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.02 | % | — |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 310 - 330 | °C | — |
| Mould Temperature | 80 - 130 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 6.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 300.0 | °C | — |
| MVR Load | 1.2 | kg | — |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 100-120 °C for 2-3 h
- In an air circulatIng dryer 100-120 °C for 4-12 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.