Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Fillers Included
- Polymer Name
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
Value Units Test Method / Conditions Tensile Strength (Type 2) 6.0 MPa ISO 37 Tear Strength (Method Ba) 25.0 kN/m ISO 34-1 Elongation at Break (Type 2) 390.0 % ISO 37 Shore Hardness A (15s) 65.0 - ISO 868 Tensile Stress at 100% Elongation (Type 2) 2.9 MPa ISO 37 - Physical Properties
Value Units Test Method / Conditions Density 940.0 kg/m³ ISO 1183 - Thermal Properties
Value Units Test Method / Conditions Coeffecient of Linear Thermal Expansion (parallel) 9.6 E⁻⁶/K ISO 11359-1/-2 Compression Set (22h, at 70°C, 25%, Type A) 36.0 % ISO 815 Compression Set (22h, at 100°C, 25%, Type A) 38.0 % ISO 815 Compression Set (72h, at 22°C, 25%, Type A) 20.0 % ISO 815 Compression Set (72h, at 125°C, 25%, Type A) 65.0 % ISO 815 - Typical Properties
Value Units Test Method / Conditions Service Temperature (depending on load, geometry, etc.) - 40 to 125 °C - Moisture Content max. 0.1 % - - Processing Information (Injection Molding)
Value Units Test Method / Conditions Back Pressure (hydraulic) min. 5 bar - Mould Temperature 10 - 60 °C - Melt Temperature 195 - 230 °C - Holding Pressure (of injection pressure) 50 - 70 % - Injection Speed High - - - Rheological Properties
Value Units Test Method / Conditions Shrinkage (Lengthwise, 24h) 2.5 - 2.9 % ISO 294-4 Shrinkage (Lateral, 24h) 1.2 - 1.6 % ISO 294-4 Spiral Flow (2 mm wall thickness) 55.0 cm -
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
Storage & Handling
- Storage Conditions
Store in dry, tighlty sealed protected from light not above 30°C.