Products in Equipment & Parts

Nylatron® GSM Polyamide PA6, a unique material that combines the benefits of Molybdenum Disulphide (MoS2) with the impact resistance of cast nylon products. This material is specifically designed to enhance load-bearing capabilities while maintaining its strength and toughness.Features:Contains finely divided particles of Molybdenum Disulphide (MoS2)Enhances load-bearing capabilitiesMaintains impact resistance inherent to cast nylon productsPossesses an ideal combination of strength and toughnessExhibits excellent mechanical and electrical propertiesBenefits:Can withstand high pressure and heavy loadsResistant to impact and wearProvides stability and durability in various applicationsCan be used in high-precision and automated equipmentApplications:GearsBearingsSprocketsSheavesConstruction and heavy equipment marketsNylatron® GSM Polyamide PA6 is an ideal solution for industries that require materials with high load-bearing capabilities, excellent impact resistance, and strong mechanical and electrical properties.

Sultron® LSG FG R5100 PPSU is a product available in the form of plates and rods, and it possesses various important features. These include being ethylene oxide sterilizable, biocompatible, excellent sterilization resistance, X-ray sterilizable, alkali resistant, life science grade, gamma sterilizable, steam sterilizable, acid resistant, heat sterilizable, plasma gas sterilizable, excellent hydrolysis resistance, and high ductility. It comes in the color black and finds applications in equipment and parts, implants and prosthetics, medical devices and assemblies, surgical instruments, and trays, as well as connectors in the medical field.

Duratron® U2300 PEI, a flame resistant Polyetherimide that offers exceptional rigidity, strength, dimensional stability, and heat resistance. With 30% glass-reinforcement, Duratron® U2300 PEI is the most durable and high-performance plastic offered in the Duratron® PEI line.Features:30% glass-reinforced for highest rigidity, strength, dimensional stability, and heat resistanceFlame resistantLowest Coefficient of Linear Thermal ExpansionSuperior strength-to-weight ratio and tensile strengthBenefits:Ideal for reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, and structural components that require high strength and rigidity at elevated temperaturesCan withstand harsh conditions and high temperaturesSuitable for a wide range of applicationsApplications:Reusable medical devicesAnalytical instrumentsElectrical insulatorsSemiconductor process componentsStructural components that require high strength and rigidity at elevated temperaturesDuratron® U2300 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions and high temperatures. Whether you are looking to improve the performance of your reusable medical devices, analytical instruments, electrical insulators and semiconductor process components, or need a material that can withstand high temperatures and harsh environments, Duratron® U2300 PEI is the ideal solution. Try it today and experience the difference for yourself!

Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Semitron® MPR 1000 - an advanced engineering material that is specially developed for use in the semiconductor and electronics industry. This material boasts excellent heat resistance and low erosion rates in plasma chambers, making it a top choice for vacuum chamber applications such as etch, CVD, and ion implant.Features:Longevity: Increased life in plasma chambers (up to 25X over polyimide in ozone)Clean: Low ionic metal content and low out-gassingValue: Lower overall cost in use compared to traditional materials used in vacuum chamber applications such as quartz, ceramics, and engineering plasticsBenefits:Long-lasting performance in plasma-based vacuum chambersLow maintenance and cost-effective solutionClean and efficient, suitable for semiconductor and electronics industryApplications:Clamp ringsTrench ringsScrewsPinsShower headsCentering pinsFocus ringsInsulatorsVacuum padsWafer guidesSemitron® MPR 1000 is a versatile material that is ideal for use in vacuum chamber applications within the semiconductor and electronics industry. With its outstanding heat resistance and low erosion rates, this material is a cost-effective and efficient solution that ensures longevity and clean performance in plasma-based vacuum chambers.

Altron™ 1000 PC machine grade polycarbonate is a transparent, amorphous thermoplastic that offers exceptional impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. This grade is produced from select batches of non-UV stabilized polycarbonate resin that complies with EU and FDA regulations for plastics intended to come into contact with food products.Features:Transparent, amorphous thermoplasticSuperior impact strengthSuperior flexural modulus of elasticityMinimal moisture absorptionOutstanding resistance to acidsGreat electrical characteristicsBenefits:Durable and able to withstand high impactsResistant to deformation under loadLow moisture absorption means no swelling or warpingResistant to acidic solutions, making it suitable for a variety of applicationsExcellent electrical characteristics, making it suitable for semiconductor and electronics applicationsApplications:Semiconductor and electronics applicationsTransparent structural applicationsFood contact applications that comply with EU and FDA regulations

Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

TIVAR® Sterra™ DrySlide UHMW-PE is an internally lubricated product. This lubricant is built into the PE-UHMW matrix with a higher molecular weight. It offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW. The additives used also make this material static dissipative and considerably improves UV-resistance. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

KyronMAX® S-4330 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of high-temperature PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required, especially at high temperatures.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessHigh-temperature PPA base: provides excellent thermal stability, dimensional stability, and chemical resistance at high temperaturesInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is needed, such as in high temperature motors and generators.KyronMAX® S-4330 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.

Nylatron® 101 Polyamide PA66 and Ertalon® 66 SA Polyamide PA66 - the ultimate solution for applications that require a combination of strength and toughness. These unmodified shapes are characterized by their superior mechanical strength, stiffness, and wear resistance, making them ideal for a wide range of industrial applications.Features:High mechanical strength, stiffness, and hardnessGood fatigue resistance, sliding properties and machinabilityHigh mechanical damping abilityExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Benefits:With Nylatron® 101 PA66 and Ertalon® 66 SA PA66, you can be sure that your components will withstand even the most demanding of conditions.The superior strength and toughness of these materials ensures that they can handle heavy loads and high-stress applications with ease.The excellent wear resistance and sliding properties of these materials make them ideal for use in gears, bearings, bushings, and other moving parts.Their good electrical insulating properties and resistance to high energy radiation make them suitable for use in electrical equipment and machinery.Applications:Screw machined electrical insulatorsBushings, bearings, gears, roller wheels, star wheels, and sealsFood processing and packaging industry (FDA and EU food contact compliant composition)Suitable for machining on automatic lathes

KyronMAX® S-9230 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of PEEK (Polyetheretherketone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPEEK base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the aerospace, medical, and industrial industries where high temperature, strength and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesMedical devices, implants and components in medical equipment that require high strength and biocompatibility.KyronMAX® S-9230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered.It's also worth mentioning that PEEK is a biocompatible material and can be used in medical applications, but it's important to note that should be evaluated for the specific application and use case.

Nylatron® GSM Blue PA6 is a unique and advanced bearing grade that offers exceptional frictional characteristics, low coefficient of friction, and a low "k" factor. This makes it an ideal solution for high pressure and low speed applications, such as slide pads, thrust washers, and trunnion bearings. Additionally, it is also an excellent choice for bearing and wear parts in a wide range of automated equipment applications.Features:Superior frictional characteristicsLow coefficient of frictionGreater limiting PVLow "k" factorBroadest size range availabilityDark blue in colorBenefits:Ideal for high pressure and low speed applicationsExcellent wear resistanceGood mechanical and electrical propertiesIdeal balance of strength and toughnessLow coefficient of frictionApplications:Slide padsThrust washersTrunnion bearingsBearing and wear parts in automated equipment applications.

Ketron® HPV Polyetheretherketone PEEK shapes, a carbon fiber reinforced, graphite and PTFE lubricated material that offers the lowest coefficient of friction and the best machinability of all PEEK materials. This black-colored material is designed for applications where low wear and friction, and high pressure-velocity capabilities are needed. Features: Carbon fiber reinforced with graphite and PTFE lubricants Lowest coefficient of friction and best machinability of all PEEK materials Excellent tribological properties (low friction, long wear and high pressure-velocity capabilities) Benefits: Improves the performance of service bearings, bushings, insulators, valves, and seals with its combination of low wear and friction and high LPV Long wear and high pressure-velocity capabilities make it suitable for wear and friction applications The carbon fibers, PTFE and graphite lubrication results in a Ketron PEEK "Bearing Grade" Applications: Service bearings Bushings Insulators Valves Seals Wear and friction applications Ketron® HPV PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your service bearings, bushings, insulators, valves, and seals or need a material suitable for wear and friction applications, Ketron® HPV PEEK is the ideal solution.

Ketron® CA30 Polyetheretherketone PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance that Ketron® GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications.

Proteus® LSG HP PP-H is a product available in the form of plates and rods and is well-suited for various applications. This material is known for its features, including low leachability, X-ray sterilizability, life science grade, gamma sterilizability, high purity, plasma gas sterilizability, chemical resistance, low moisture absorption, ethylene oxide sterilizability, biocompatibility, and low extractable. It comes in the colors off-white and natural and offers excellent resistance to chemical cleaning agents and zero moisture absorption. Its applications include equipment and parts in various industries.

Duratron® T4203 PAI is a polyamide-imide material that offers exceptional strength and durability in high-tech equipment and structural applications. With features such as high impact strength, high elongation, and dimensional stability, it is a reliable choice for precision parts and components that require high performance in extreme conditions.Features:High impact strengthHigh elongationDimensional stabilityHigh temperature resistanceExceptional machinabilityBenefits:Able to withstand extreme conditions and loadsIdeal for precision parts and components in high-tech equipmentSuitable for structural applications such as linkages and seal ringsExcellent choice for wear applications involving impact loading and abrasive wearApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearPrecision parts in high-tech equipment

TIVAR® Sterra™ UHMW-PE shapes are produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as construction and heavy equipment, agriculture and grain handling, bulk material and parcel handling, automotive, and transportation. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ UHMW-PE is often a favored solution for wear and outrigger pads, strips, rails, and guides, rollers, conveyors, chutes, hoppers, impact plates, and asphalt equipment components. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ketron® Sterra™ 1000 PEEK is an unfilled, general-purpose grade known for its exceptional elongation and toughness. It is ideal for instrument and seal components, where ductility and inertness are crucial. Ketron® Sterra™ 1000 PEEK portfolio, featuring recycled content for a reduced carbon footprint compared to non-recycled materials.

TIVAR® Sterra™ ESD UHMW-PE are electrostatic dissipative shapes produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as agriculture and grain handling, bulk material handling, and parcel handling. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ ESD UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ ESD UHMW-PE is often a favored solution for conveyor, chute, and hopper applications, where electrical charge build-ups are prevalent. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Techtron® 1000 PPS is a high-performance polymer known for its excellent dimensional stability, chemical resistance, and easy machinability. It is a unfilled grade of Polyphenylene Sulfide (PPS) and is ideal for a wide range of applications where precision and durability are required.Key features:Outstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion make it easy to maintain tight tolerances.Easy machinability: this material can be machined to close tolerances, making it suitable for precise components.Corrosion resistance: due to its chemical resistance, this material is ideal for use in corrosive environments.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals and moistureEnhanced precision and dimensional stabilityImproved machinability and tight tolerance controlApplications:Structural parts in corrosive environments such as chemical processing and oil and gas industry.Precision components and machine parts that require dimensional stability, wear and chemical resistanceElectrical components, as it has good electrical insulation and dielectric properties.Automotive and aerospace components as it can withstand high temperatures.Techtron® 1000 is a versatile and reliable material that can help improve the performance and longevity of your products, it's available in a range of shapes and sizes, making it easy to incorporate into your designs.

Ertalon® 6PLA / Nylatron® MC 907 is a high-performance, unmodified cast nylon 6 grade that offers exceptional strength, hardness, creep resistance, and heat aging properties. This grade is also FDA and EU food contact compliant, making it ideal for use in the food processing and packaging industry.Features:High mechanical strength, stiffness, and hardnessGood resistance to creep, wear, fatigue, and heat agingGood sliding properties and machinabilityElectrical insulation and resistance to gamma and x-ray radiationBenefits:Can withstand high loads and extreme temperaturesProvides reliable performance in harsh environmentsEasy to machine for custom applicationsSafe for use in food contact applicationsApplications:Gears, rollers, wheels, bearings, and conveyor wear parts in the food processing and packaging industryOther applications that require high strength and hardness, such as sleeve and slide bearings, wear pads, rollers, pulleys, scrapers, gear wheels, sprockets, star wheels, and insulators.

Acetron® C Sterra™ POM-C is a general-purpose copolymer acetal grade that is often favored for its porosity-free nature. Acetron® C Sterra™ POM-C shapes offer low moisture and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Techtron® HPV PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added wear resistance and strength of glass fiber reinforcement and internal lubrication. This compression-molded material is designed to excel in demanding environments and applications where wear resistance and dimensional stability are required.Key features:Superior wear resistance: internally lubricated and glass fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding chemical and hydrolysis resistance: suitable for use in harsh environments and chemicalsExcellent dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesGreat electrical insulating and dielectric propertiesLow coefficient of friction and inherent low flammabilityGlass fiber reinforced: increased strength and stiffness, ideal for wear componentsFood grade availableBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion, and wearEnhanced precision and dimensional stabilityImproved electrical insulation and dielectric propertiesReduced friction and lower flammability riskMore cost-effective than advanced engineering plastics for certain applicationsApplications:Wear components such as bushings and bearings, CIP wash down parts, and pump, valve, and compressor applications in the aerospace, food processing, and oil and gas industries.Industrial equipment such as industrial drying and food processing ovens (bearings, rollers, etc.)Chemical process equipment (pump-, valve & compressor components)Electrical insulating systemsCost-effective alternative to advanced engineering plastics in certain applicationsTechtron® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, including food grade, making it easy to incorporate into your designs.

Ertalon® 4.6 and Nylatron® 4.6 are advanced polyamide PA46 shapes that are known for their superior heat aging resistance and ability to retain outstanding stiffness and creep resistance over a wide range of temperatures.Features:Superior heat aging resistanceRetains outstanding stiffness and creep resistance at high temperaturesOutperforms PA6, PA66, POM, and PET in extreme environmentsBenefits:Ideal for use in extreme environments where traditional materials fall shortCan withstand high temperatures without losing mechanical propertiesSuitable for a wide range of applications, including bushings, bearings, gears, pulleys, sheaves, wear pads, valve seats, seals, and conveyor wear componentsApplications:Bushings and bearings in extreme temperature environmentsGears and pulleys in high-heat industrial settingsWear pads and valve seats in harsh chemical environmentsSeals and conveyor wear components in high-temperature applications.

Ketron® GF30 Polyetheretherketone PEEK, a 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This material is designed for applications where high strength, stiffness, and stability are needed, especially at high temperatures. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F / 150°C Benefits: Offers improved strength, stiffness, and stability in high temperature applications Low expansion rate and high flexural modulus make it suitable for structural applications Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions, especially at high temperatures. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® GF30 PEEK is the ideal solution.

Nylatron® MC 901 Heat Stabilized (HS) Polyamide PA6 shapes are a durable and versatile solution for industrial applications that require long-term thermal stability and high mechanical properties.Features:Long-term thermal stability up to 260° F (126° C)Outstanding mechanical strength, rigidity, hardness, and toughnessGreat sliding properties and wear resistanceSuperior resistance to high-energy radiationExcellent electrical insulationBenefits:Provides reliable performance in high temperature environmentsResists wear and tear in industrial applicationsOffers high resistance to high-energy radiationProvides excellent electrical insulationApplications:Conveyor wear componentsBushingsSheavesWear padsValve seats and sealsCustom parts and gearswheels

Ertacetal H-TF (POM-H + PTFE) is a Delrin® AF Blend, a combination of PTFE fibers evenly dispersed in a Delrin acetal resin. This material offers superior sliding properties, making it ideal for bearings, gears, and other low-friction applications. Compared to Ertacetal C and H, Ertacetal H-TF offers improved performance and longer wear life.Features:Low friction, long wearingHigh strength and toughnessHigh dimensional stability and machinabilityPTFE fibers evenly dispersed in a Delrin acetal resinBenefits:Reduced stick-slip behavior in bearings and other low-friction applicationsIncreased wear resistance and longer lifespanImproved performance in harsh environmentsFood-contact compliant for use in the food processing and packaging industryApplications:BearingsGearsPulleysConveyor wear partsAny other low-friction application requiring high strength and dimensional stability.

Duratron® CU60 PBI, the ultimate engineering plastic for high-performance applications. This advanced material is made from Polybenzimidazole (PBI) and is the highest performing engineering plastic offered by Mitsubishi Chemical Advanced Materials. With superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°C, Duratron® CU60 PBI is the ideal choice for applications where extreme temperatures and high loads are present.Features:Superior mechanical properties, heat resistance, and mechanical property retention over 400°F / 205°CBetter wear resistance and load carrying capabilities at extreme temperatures than any other reinforced or unreinforced advanced engineering plastic"Clean" in terms of ionic impurity and does not outgas (except water)Excellent ultrasonic transparency, making it an ideal choice for probe tip lenses in ultrasonic measuring equipmentExcellent thermal insulation, other plastics in melt do not stick to Duratron CU60 PBIBenefits:Duratron® CU60 PBI offers unmatched performance in high-heat applications, making it ideal for high heat bushings, connectors, valve seats, and probe tip lenses in semiconductor manufacturingIts superior wear resistance and load carrying capabilities make it a great choice for aerospace and other high-performance industriesIts "clean" characteristics make it ideal for use in vacuum chamber applications in semiconductor manufacturingIts excellent thermal insulation and non-stick properties make it ideal for contact seals and insulator bushings in plastic production and molding equipmentDuratron CU60 PBI is an ideal replacement for metals and ceramics in pump components, valve seats, bearings, rollers, and high-temperature insulatorsApplications:High-performance vacuum chamber applications in semiconductor manufacturingAerospace and other high-performance industriesHigh heat bushings, connectors, valve seats, and probe tip lensesContact seals and insulator bushings in plastic production and molding equipmentPump components, valve seats, bearings, rollers, and high-temperature insulatorsCritical components to decrease maintenance costs and to gain valuable production "uptime".

Duratron® U1000 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional strength, dimensional stability, and flame and heat resistance. With the ability to perform continuously to 340°F / 170°C, Duratron® U1000 PEI is the ideal solution for applications that require consistent dielectric properties over a wide frequency range.Features:High strengthDimensional stabilitySuperior flame and heat resistancePerform continuously to 340°F / 170°CHydrolysis and chemical resistanceBenefits:Suitable for a variety of applications requiring high strength and rigidity at elevated temperaturesCan withstand repeated autoclaving cycles making it ideal for medical, pharmaceutical, and biotechnology marketsHydrolysis and chemical resistance make it suitable for electrical / electronic insulators and semiconductor process componentsApplications:Medical and pharmaceutical industryBiotechnology marketElectrical / electronic insulatorsSemiconductor process componentsStructural components requiring high strength and rigidity at elevated temperaturesDuratron® U1000 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your medical, pharmaceutical, or biotechnology applications or need a material suitable for electrical/electronic insulators and semiconductor process components, Duratron® U1000 PEI is the ideal solution.

Nylatron® MC 907 PA6 and Ertalon® 6PLA PA6 are unmodified cast nylon 6 grades that offer the highest strength and hardness of all nylon 6 grades. They exhibit great creep and wear resistance, heat aging properties, and machinability capabilities, making them ideal for the food processing and packaging industry.Features:High mechanical strength, stiffness, hardness, and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding properties and excellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma- and X-rays)Good machinabilityBenefits:High strength and hardness for maximum durability and longevityExcellent creep and wear resistance for minimal maintenance and replacement costsHeat aging properties ensure long-term performance in high-temperature environmentsGood machinability for easy customization and shapingFDA and EU food contact compliant composition for safe and hygienic use in food processing and packaging applicationsApplications:GearsRollersWheelsBearingsConveyor wear partsAnd more in the food processing and packaging industry.

Nylatron® LFX Polyamide PA6, a specially formulated internally lubricated material designed for unlubricated, highly loaded, and slowly moving parts applications. This advanced material offers a range of exceptional properties that make it a top choice for various industries, including pharmaceutical, biotechnology, medical, and processing.Features:Internally lubricated for unlubricated, highly loaded, and slowly moving parts applicationsHigh mechanical strength, stiffness, hardness, and toughnessGreat sliding propertiesHigh mechanical damping capabilitiesExceptional electrical insulating propertiesBenefits:Excellent wear resistance and easy machiningLow coefficient of frictionHigher values of PV (pressure / velocity)Good resistance to high energy radiations (Gamma and X Rays)High mechanical damping capacityGood sliding and thermal insulation propertiesApplications:Pharmaceutical, biotechnology, medical and processing industriesIdeal for use in gears, bearings, sprockets, and sheavesSuitable for use in various machinery and equipment

KyronMAX® S-2220 is a high-performance polymer that combines the excellent strength and toughness of nylon with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength and stiffness are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessNylon base: provides excellent toughness and impact resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionBenefits:Improved strength and stiffness of components in demanding environmentsIncreased resistance to wear and tearEnhanced performance and durability of your productsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industriesComponents that require high strength and stiffness, such as gears and bearing componentsIndustrial and manufacturing equipment where high strength and stiffness is neededComponents that require high strength and stiffness in harsh environmentsKyronMAX® S-2220 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered, only injection molding pellets.lets.

Acetron® AF Blend POM-H - the ultimate solution for enhanced wear resistance in conveying and material handling applications. Made from PTFE-filled Homopolymer, Acetron® AF offers a unique combination of properties that make it stand out from other acetal grades. With a low coefficient of friction and great wear performance in wet environments, this material is perfect for bushings, bearings, electrical components, and rollers.Features:Enhanced wear resistanceLow coefficient of frictionGreat wear performance in wet environmentsLow moisture absorptionBenefits:Operates at higher speeds with reduced wearDimensional stability even in wet environmentsSuitable for food-contact applicationsApplications:Conveying and material handling environmentsBushings, bearings, electrical components, and rollers.

Techtron® PSBG is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and durability of carbon fiber reinforcement. This compression-molded material is internally lubricated and designed to excel in wear applications where an electrically conductive material is required.Key features:Excellent wear resistance: internally lubricated and carbon fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesExtreme chemical and corrosion resistance: ideal for use in demanding environmentsLow coefficient of linear thermal expansion: making it suitable for applications where dimensional stability is criticalElectrically conductive: ideal for wear applications that require electrical conductivityBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved electrical conductivityApplications:Bushings and bearings, lantern rings, and pump wear components in the oil and gas industryElectrical components as it is electrically conductiveAutomotive and aerospace components as it can withstand high temperatures.Wear-resistant components in general, as it is internally lubricated and reinforced with carbon fiberTechtron® PSBG is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.

Nylatron® GF30 and Ertalon® 66 GF30 - the ultimate solution for high-performance industrial applications. Our heat-stabilized, 30% glass fiber-reinforced polyamide PA66 offers a unique combination of increased strength, stiffness, creep resistance, and dimensional stability while maintaining its exceptional wear resistance properties.Features:High mechanical strength, stiffness, hardness and toughnessGood fatigue resistanceHigh mechanical damping abilityGood sliding properties and excellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Good machinabilityBenefits:Ideal for sleeve and slide bearings, wear pads, rollers, pulleys, scrapers, gear wheels, sprockets, star wheels, and insulatorsCan withstand high maximum service temperaturesOffers lower maintenance costs and longer service lifeEasy to machineApplications:Sleeve and slide bearingsWear padsRollersPulleysScrapersGear wheelsSprocketsStar wheelsInsulatorsUpgrade your industrial components with Nylatron® GF30 and Ertalon® 66 GF30 for improved strength, durability, and performance in even the toughest of environments."