Equipment & Parts

DuPont

Delrin® 150 NC010

Delrin® 150 NC010 is a high viscosity acetal homopolymer specifically designed for extrusion processes. It has excellent thermal stability, low die deposit, and enhanced crystallization for low porosity.

DuPont

Kalrez® 4079

Kalrez® 4079 perfluoroelastomer parts are a low compression set product for general purpose use in O-rings, diaphragms, seals and other parts used in the chemical process and aircraft industries. It is a carbon black filled product with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. It exhibits low swell in organic acids, inorganic acids and aldehydes, and has good response to temperature cycling effects. A maximum service temperature of 316°C (600°F) is suggested, with short excursions to higher temperatures possible. Kalrez® 4079 is not recommended for use in hot water/steam applications or in contact with certain hot aliphatic amines, ethylene oxide, or propylene oxide.

DuPont

Kalrez® Spectrum™ 6375

Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.

DuPont

Kalrez® Spectrum™ 7075

Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.

DIC Corporation

DIC.PPS® Z-230

Outline: Z-230 is a 30% glass fiber reinforced super tough PPS compound that provides excellent impact, thermal shock, and hot water resistance. Color: Black

AdvanSix

Aegis® H100ZP

Aegis® H100ZP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown film applications. The resin product complies with all food contact regulations. Aegis® H100ZP homopolymer combines strength, toughness and thermoforming properties with excellent heat, chemical and abrasion resistance.

DuPont

Kalrez® 9100

Kalrez® 9100 is an amber translucent product targeted specifically for PECVD, ALD, HDPCVD and Conductor (Poly/Metal) Etch applications*. Kalrez® 9100 has been specifically designed for low erosion and ultra-low particle generation in harsh plasma environments. It offers excellent thermal stability, very low outgassing as well as excellent elastic recovery and good mechanical strength properties and is well suited for both static and select dynamic sealing applications*. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for allKalrez® 9100 parts.

UBE Industries

UBE Nylon 5034 B

UBE Nylon 5034 B is a PA6/6.6 copolyamide, produced by continuous polymerization process. It is a high viscosity grade suitable for numerous applications. The grade can be used for cast film and blown film (air cooled)..

DuPont

MOLYKOTE® 165 LT Grease

MOLYKOTE® 165 LT Gearwheel Grease for the lubrication of highly stressed open gears and reducing gears made of metal, with a peripheral speed of up to 2.5 m/s. Open gears that are subjected to high stresses and bad weather effects. Successfully used in crushing plants and in transmission gears and threaded spindles of heavy, crank-driven presses.

Prime Polymers

Evolue® SP1510

Prime Polymers Evolue® SP1510 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue® SP1510 include film, coating applications and industrial applications.

UBE Industries

UBE Nylon 5034 FDX40

UBE NYLON 5034 FDX40 is a high viscosity, nucleated Polyamide 6/6.6 copolymer. The material is suitable for cast film and air-cooled blown film production. Typical application is for shrink bags and pouches.

DuPont

MOLYKOTE® 7 Release Compound

MOLYKOTE® 7 Release compound is a Dimethyl silicone compound for a variety of lubrication and protection applications. It can be used in applications including mold release agent for foundry shell and core molds. Break-in treatment for bladders on tire presses, rubber lubricant and preservative. Release agent for adhesives and glues. Cable pulling lubricant to draw rubber-covered cable through conduit. Release agent for plastic extruders and processing equipment and release agent for plastic film packaging machines.

DuPont

Kalrez® 6230

Kalrez® 6230/6230A* perfluoroelastomer parts are a black product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6230/6230A parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez° 6230/6230A parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability.

DuPont

Kalrez® 6221

Kalrez® 6221 perfluoroelastomer parts are a white product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6221 parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez® 6221 parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability. Kalrez® 6221 is available as O-rings. For white custom parts, please refer to Kalrez® LS205 parts.

DuPont

Kalrez® Spectrum™ 7375

Kalrez® Spectrum™ 7375 perfluoroelastomer parts are an innovative FFKM product based on a patented crosslinking system for chemical process industry applications where broad chemical and water/steam resistance are needed at elevated temperatures. Kalrez® Spectrum™ 7375 parts exhibit excellent compression set resistance, outstanding physical property retention, and good mechanical strength properties. A maximum application temperature of 300°C is suggested.

Polyplastics Group

Topas® 8007X-10

Polyplastics Group Topas® 8007X-10 is a highly UV-transparent version of our 8007 series of injection molding resins. Like the rest of the 8007 grades, 8007X10 is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for diagnostic and analytical products. It transmits ultraviolet light at lower wavelengths than other polymers. Analytical results are more accurate with pure TOPAS COC and its higher UV transmission for more precise analysis in contact with sensitive chemistries.

DuPont

MOLYKOTE® 111 Compound

MOLYKOTE® 111 Compound is used as a valve lubricant and sealant.

DuPont

MOLYKOTE® SH 44 MT Grease

MOLYKOTE® SH 44 MT Grease is high-temperature silicone grease for bearings.

DuPont

MOLYKOTE® Longterm 1 Plus Extreme Pressure Bearing Grease

MOLYKOTE® Longterm 1 Plus Extreme Pressure Bearing Grease is a Lubricating grease for metal/metal combinations with slow to medium-fast movements, especially with high loads. Used successfully for journal bearings in sugar mills.

DuPont

MOLYKOTE® G-1023 Grease

MOLYKOTE® G-1023 is PAO grease for plastic/metal parts lubrication. It is used in Slides for automotive parts

DuPont

Kalrez® Spectrum™ 6380

Kalrez® Spectrum™ 6380 perfluoroelastomers parts are a non-black product developed specifically for chemical processes involving hot, aggressive amines. In addition, it has excellent overall chemical resistance (see chart below). This cream colored product is easily identifiable when selecting an O-ring material for harsh chemical plant services. This material has excellent mechanical properties and is a top choice for both static and dynamic sealing applications. A maximum service temperature of 225°C is suggested while short-term excursions to higher temperatures are permissible.

DuPont

MOLYKOTE® AS-880N Grease

MOLYKOTE® AS-880N is Grease Silicone oil/silica-thickened light-consistency grease containing specially formulated solid lubricants. MOLYKOTE® AS-880N Grease is designed to lubricate between metal/metal and metal/plastic components in disk brake systems. It is commonly applied between the brake pad and brake shim(s) to reduce and prevent squeal noise that occurs during braking.

DuPont

MOLYKOTE® D-321 R Anti-Friction Coating

MOLYKOTE® D-321 R Anti-Friction Coating is an air-curing dry lubricant.

DuPont

MOLYKOTE® G-4501 FM Multi-Purpose Synthetic Grease

MOLYKOTE® G-4501 FM Multi-Purpose Synthetic Grease is a specialty lubricant that combines the benefits of wide operating temperature and broad compatibility with varied materials.

SACO AEI Polymers

PEXIDAN® L/T-UV

PEXIDAN® L/T-UV is a high density PEX system consisting of a silane grafted basecompound A-1001 and a catalyst masterbatch CAT-003 (or A-1022 and CAT-117). When mixed and extruded in the proper proportions, the two-component system results in a material that is crosslinkable by exposure to moisture or by immersion in hot water at 90-95°C. PEXIDAN® L/T is listed by NSF International to standards 14 and 61 and to Canadian Standards Association standard B137.5. NSFI certification to ASTM F876 and ASTM F2023 testifies to its superior resistance to oxidation by hot, chlorinated water. PEXIDAN® L/T is permitted to be used in domestic continuous re-circulation systems and is listed by NSF as a NSF-pw CL5 / PEX 5006 material.

Sika

Biresin® CR122

Biresin® CR122 is a medium viscosity epoxy resin system suitable for the production of high performance fiber reinforced composites with a thermal performance up to 120°C.

Prime Polymers

Evolue® SP2320H

Prime Polymers Evolue® SP2320H is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue® SP2320H include film, agricultural, coating applications and industrial applications.

Carbon Inc.

CarbonResin™ RPU 61

CarbonResin™ RPU 61 is a tough, and abrasion-resistant higher resolution material that is a good choice for parts that require rigidity, strength, and durability. Rigid Polyurethane is our most versatile rigid material family. It is used across a wide range of industries, including consumer products, automotive, and industrial. RPU is comparable to ABS.

Polyfill Technologies

Polyfill Technologies Antistatic Masterbatch-PT3002

Polyfill Technologies Antistatic Masterbatch-PT3002 is a surface property modifier, which now-a-days finds extensive use by Plastics Processor, to reduce and control the static charges developed on the surface of plastic parts having large surfaces like film, fibers etc as spark discharge formed by static charges can produce serious accidents. Plastics, particularly sensitive to static build up Polyolefins, Nylon, Polyesters, Urethanes, Cellulosics, Acrylics etc. Antistatic Masterbatch-PT3002 is based on Ethoxy Amine, using LLDPE as a carrier resin, compounded in most modern extrusion equipment, using state of art technology.

DuPont

MOLYKOTE® Polygliss-N Adhesive Transparent Lubricant

MOLYKOTE® Polygliss-N Adhesive Lubricant is a adhesive lubricant for metal/metal combinations involving slow to medium-fast movements and light to medium loads. Suitable for all types of chains, rails, open gears, joints, hinges, etc., particularly when exposed to weather or moisture.

Lion Elastomers

Royalene® 677

A Highly Extendable ENB Polymer with Heavy Hydrotreated Paraffinic Oil for TPO/TPV and Thermoset Applications

GMS Composites

GMS Composites EP – 530

GMS Composites EP – 530 is a flame retardant epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-530 is available in a range of substrates such as carbon, glass or aramid. The product is self-extinguishing and meets the UL 94 V-0 classification. The flow and tack of EP-530 can also be varied.

Sika

Biresin® CR80

Biresin® CR80 is a low viscosity epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 80°C.

DuPont

Kalrez® 0090

Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).

DuPont

MOLYKOTE® G-407 Anti-Fretting Grease

MOLYKOTE® G-407 Anti-Fretting Grease is a polyalkylene glycol (PAG)-based grease designed to be used as a lubricant and corrosion protectant for metal-to-metal applications (e.g., guide pins) in automotive brake calipers. The grease has an operating temperature range of -40 to 150°C (-40 to 302°F).

AOC, LLC

Vipel® F013-AAB-00

AOC's Vipel F013 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F013 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F013 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistantVipel F013 highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment.