Products in Industrial: Acrylics & Acrylates

NECAL 9170 is an unsupported film of pressure sensitive adhesive displaying excellent bond characteristics, high clarity, and good initial tack. It is an excellent option for decals, membrane switches, overlays, industrial transfer tapes, multi-purpose laminations. This adhesive is used in Appliance, Automotive, Transportation, Industrial Equipment, Recreational Equipment, and Electronic Applications.

FONTAINE SHAN Propoxylated Glyceryl Triacrylate GPTA Offers good reactivity, crosslinking, hardness, chemical resistance without brittleness and pigment wetting.

KELLOMER VK-420 is a aliphatic urethane acrylate oligomer. It is characterized by low odor, and high molecular weight. The cured films exhibit excellent flexibility, non yellowing, and good adhesion to substrates.

CMC Klebetechnik CMC 12100 is a double-sided tape used for splicing. A green coating is applied to one side of the substrate.  Adhesive polysiloxane with a high initial tack. On the other hand, there is an acrylic adhesive that is still present.  provides good anchorage to low energy surfaces and will cure further after heat exposure.

Omnivad 280 is a radically curable silicone acrylate utilized in a broad array of UV/EB curable coatings and printing inks. Omnivad 280 provides superior substrate wetting and surface slip by reducing the surface coefficient of friction. It enhances durable anti-mar and anti-blocking performance.

FastelTack ST2 was created as a high performance acrylic-based pressure sensitive adhesive with excellent long-term adhesion to a wide variety of substrates. FastelTack is an unsupported acrylic pressure sensitive adhesive supplied on a moisture stable polycoated release liner available in continuous rolls, slit rolls, die cuts formats, or prelaminated by Fastel Adhesives to a wide range of substrates including aluminum, copper, stainless steel, PET Films, polyimide films, and customer required substrates. FastelTack ST2 has excellent long-term adhesion over a wide temperature range, as well as superior long-term aging properties. When in contact with flexible PVC, ST is designed to provide excellent resistance to plasticizer migration. ST exhibits sunlight resistance and moisture, solvents, mild acid, mild alkali, oil and grease.

self® 2100 is Clothing and leather industry. It does not dirty the needles of adhesive while sewing.

Guangzhou Chemical 2-Hydroxy Propyl Acrylate can be used in a variety of ways to produce resins that are useful in high performance coating applications. Using typical methods for the polymerization of ethylenically unsaturated monomers, hydroxypropyl acrylate (HPA) can be used to attach hydroxyl groups to an acrylic polymer backbone. The pendant hydroxyl groups can then act as sites for reaction with a variety of cross-linking agents. HPA allows faster curing cycles and/or reduced baking temperatures, compared with hydroxyalkyl methacrylates. Also HPA can be formulated at higher solids in coating applications.

Matsui International Company Stretch White 301 is a direct print and mixing white for “Performance” and high stretch fabrics that can be mixed with “Neo Pigments” to achieve an extremely soft hand feel and excellent elasticity.

Elite UVE2500-TP20 is a epoxy Novolac or BPF glycidyl ether acrylate with 20% TPGDA and is BPA-free.

Guangzhou Chemical 2-Hydroxy Ethyl Acrylates can be used in a variety of ways to produce resins that are useful in high performance coating applications. Using typical methods for the polymerization of ethylenically unsaturated monomers, hydroxyethyl acrylate (HEA) can be used to attach hydroxyl groups to an acrylic polymer backbone. The pendant hydroxyl groups can then act as sites for reaction with a variety of cross-linking agents. HEA allows faster curing cycles and/or reduced baking temperatures, compared with hydroxyalkyl methacrylates. Also HEA can be formulated at higher solids in coating applications.

Antex Chemicals (Zhongshan) AT-180 is an acrylic polymer emulsion type for alkali-swellable associative thickener in paint systems and in the textile and to provide leveling, good thickening effect.

Matsui International Company White 301 is a high mesh direct print and mixing white that can be mixed with “Neo Pigments” to achieve an extremely soft hand feel and pastel colors.

SE 1500 is a low viscosity version of SE 1701 epoxy acrylate oligomer. SE 1500 improves flexibility and toughness. This product is characterized by its fast cure response, excellent solvent resistance and high surface hardness.

Sacryl 669 is a solid water base acrylic resin. It is used as pigment grinding synthesis of emulsion and polymer emulsion.

UVP 0611, is a fatty acid based difunctional Bisphenol A based epoxy acrylate oligomer that offers very fast cure speeds and chemical resistence. It imparts toughness and flexibility to cured lithographic and screen inks also to plastic and wood coatings.

SP 283Nis a amino modified multi-functional polyester acrylate oligomer developed for UV/EB cure coating applications requiring high gloss, fast curing and low irritating properties.

SU 514 is a difunctional aliphatic urethane acrylate oligomer with 10% HDDA developed for UV/EB cure coating applications requiring good toughness, very good abrasion resistance and non-yellowing properties.

Ultrafix CA 50 are 1-part frame adhesives.

Bisomer® PEA6 is a hydroxyl functional methacrylate monomer.

Kamicryl 2077 is an acrylic polymer emulsion for paper, primed foil, and selected specialty substrates. KAMICRYL-2077 is a Rheology Controlled (RC) acrylic polymer emulsion that exhibits superior gloss, transparency, and printability on many porous or primed substrates common to the graphic arts. Additionally, KAMICRYL-2077 provides: film formation, resolubility, block resistance, rub resistance, water resistance, low foaming, high solids, and near Newtonian viscosity. KAMICRYL-2077 is an essential component of overprint varnishes that require gloss, holdout, block resistance, and water spot resistance.

SU 704 is a trifunctional aromatic urethane acrylate oligomer with HDDA developed for UV/EB cure coating applications requiring good flexibility, very good abrasion and solvent resistance.

MXLOC® PIPE SEALANT 13545 is designed for the sealing and locking of metal fittings and pipes. The product is a single component anaerobic, thixotropic, acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.

Vinysol 1024 is an emulsion (polymer microparticles) obtained by the emulsion polymerization of monomers such as acrylic ester and vinyl acetate. Monomers can be selected to control glass transition temperature (Tg) to a desired level whereby allowing the use of VINYSOL in a variety of applications such as pressure-sensitive adhesives, paint and ink binders, and textile hard finishes.

Fun To Do Castable Blend has been designed to cast your pieces in bronze, copper, tin or iron using standard vacuum investment casting methods and settings. It is an Ideal resin for casting pieces of art, Toy models, machine parts. The fully cured resin has a hardness of 73 shore D.

MPD Industries UVP 0206 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a low odor and good flexible monomer. It is compatible with a wide range of acrylated resins.

Vinysol 1091 is an emulsion (polymer microparticles) obtained by the emulsion polymerization of monomers such as acrylic ester and vinyl acetate. Monomers can be selected to control glass transition temperature (Tg) to a desired level whereby allowing the use of VINYSOL in a variety of applications such as pressure-sensitive adhesives, paint and ink binders, and textile hard finishes.

Ultrafix CA 100 are 1-part frame adhesives.

Omnivad SB Flakes is an organic filler. For absorbent substrates Omnivad SB Flakes can act as a hold-out additive, preventing low viscosity coatings or inks from soaking into the substrate. This additive will help with enhancing higher gloss, increase color strength and improve cure. This Resin is compatible with radically curable inks, coatings and adhesives.

GEB Acrybat is an acrylic sealant for joints in masonry and carpentry. It is a mono-component sealant based on acrylic resin in emulsion for making joints indoors and outdoors.

Photomer® 8061 is a novel aliphatic monofunctional acrylate (TPGMEMA) of low skin irritancy, low viscosity, low surface tension and low odor. It exhibits good solvency and viscosity reducing characteristics with typical UV/EB curable oligomers and prepolymers.

Dimengel 100 (DIM 100) is a proprietary photo polymeric acrylic gel that enables models to cure while printing, delivering solid objects straight off the printer. This unique material facilitates support-less, non-vertical parts, tops, and ceilings. The objects are hollow, translucent and can be illuminated.

RESICRONAL 2950 is a styrene acrylic copolymer emulsion and acrylic dispersing agents are the salts of polymethacrylic acid and are effective suspending agents for inorganic fillers like titanium dioxide and calcium carbonate. These are universally used in paint formulations where fillers are present in large concentration. They are also used in clay coating formulations and printing inks.

BAMM ETHYL ACRYLATE is used in the production of coatings and inks, adhesives, sealants, plastics and elastomers.

SZ 225 is an acrylate functional oligomeric amine resin generally used as an additive or diluents for more viscous oligomers. When used in formulations with a photo abstraction type photo initiator (e.g. benzophenone), SZ 225 has an accelerating effect on the UV cure speed. SZ 225 also promotes adhesion to plastic substrates such as polyester, ABS, polycarbonate and polypropylene oxide.

SU 588is an aliphatic urethane triacrylate oligomer diluted with approx. 10% of ethoxy-ethoxyethyl acrylate (EOEOEA).developed for UV/EB cure coating applications requiring excellent abrasion resistance, good toughness, fast cure response and the non-yellowing properties typical of an aliphatic urethane.