Products in Power, Water & Utilities: Corrosion Resistant

MITO® E-GO™ is a graphene-based additive that delivers multi-functional improvements in composite materials at extremely low concentrations. It has been designed with versatility, realistic solutions, and accessibility in mind. This hybridized graphene oxide/POSS additive reactively disperses while resisting agglomeration, thus unlocking the properties of graphene for various industries by utilizing both thermoset and thermoplastic polymer composites.https://mitomaterials.com/products/mito-e-go

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

Electro Chemical Engineering EC Duro-Bond Chlorobutyl is an uncured chlorobutyl elastomer applied in sheet form and vulcanized after application using exhaust steam. Sheet thicknesses of 120 mils (2.3 mm), 150 mils (3.4 mm), and 180 mils (4.6 mm) are available.

E-QX 4800 is a E-Glass fiber type.

This veil is a very conformable continuous glass fiber surfacing veil comprised of highly uniform, randomly distributed filaments bonded with special formulated resins. The veil provides excellent surface appearance on glass reinforced plastic composite parts and also has outstanding corrosion resistance properties. This veil is available for purchase in LAYER-PAK® format.

Verkid® SMC H154 is used in hot press, compression molding for the production of large parts with high mechanical properties and excellent surface finish. It is a glass fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives.

Godiplast PEEK(G) 8200G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

SURFITEX™ EU 45 G NL is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.

GraphTHERM® graphite-based conductivity additives, you get a consistent combination of electrical conductivity and thermal conductivity. The conductivities in the end product are more or less highly defined depending on the graphite grade and degree of filling.

Conformat N758 is a continuous strand, glass fiber reinforcing mat. N758 is porous, very conformable making it an excellent reinforcing mat for complicated contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding and Closed Mold Injection. With the addition of an optional extra surface veil, N758XS provides an outstanding surface finish.

Godiplast PEEK(FC) 8800FC30 is a Wear resistent abrasion reinforced resin particle, standard viscosity, black color and capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

E-2LTI 7200 is a E-Glass fiber type.

Verkid® BMC PX4 is a fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives. Generally thermoset unsaturated polyester or vynil-ester resins are used as organic matrix. With the aim of enhance its characteristics and improve its transformation, other components are added: catalysts, inhibitors, thermoplastic additives, demoulding agents, thickeners and pigments.

Ilkalem AS PV-200 is Bisphenol-A epoxy vinylester resin for GRP applications.

C-L 0900 is a carbon fiber type.

Duro-Bond Neoprene is an elastomeric sheet lining having good abrasion and chemical resistance. It is available either as a precured lining or as an uncured lining that must be vulcanized with steam or hot air before it can be used. Sheet thicknesses of 60 mils (1.1 mm), 120 mils (2.3 mm), 150 mils (3.4 mm), and 180 mils (4.6 mm) are available.

SURFITEX™ E 30 L is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.a

C-LT 2200 is a carbon fiber type.

C-QX 2300 is a carbon fiber type.

E-LT 1800-P is a E-Glass fiber type.

E-QX 2600 is a E-Glass fiber type.

Beijing Evergrow Resources PVDF SHEET sheet has the good corrosion resistance ; good mechanical properties; good thermal and electrical properties and good aging resistance ,it's widely used in petrochemical , metallurgy,food,paper ,textiles,semi-conductor,mechical engineering,medcine,nuclear insdustries. and PVDF sheet back with glass fiber can as the good lining materials used in Cheimal popes and tanks.

Godiplast PEEK(G) 8100G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Conformat® N720 is a continuous strand, glass fiber reinforcing mat. N720 is a semi-porous reinforcing mat developed specifically for pultrusion applications requiring reinforcement and enhanced surface appearance.

C-LT 1100 is a carbon fiber type.

Conformat N700 is a continuous strand, glass fiber reinforcing mat. N700 is a semi-porous mat most frequently used in flat or slightly contoured parts manufactured by Compression Molding, Closed Mold Injection, Resin Transfer Molding (RTM) and Glass Fiber Reinforced Gypsum (GFRG) processes. Parts produced using N700 have excellent trimming and punching qualities. N700 is produced with a 5 mil thick surfacing veil on both surfaces for improved surface qualities on finished parts.

E-QX 1900 is a E-Glass fiber type.

3B Fiberglass W 2020 are spe-cifically designed to provide signifi-cantly higher modulus, strength and enhanced fatigue performances ver-sus traditional E-glass for wind turbine blades made out of epoxy resin. HiPer-texTM W 2020 Rovings are per-fectly suited for the production of high modulus Non Crimped Glass Fabrics and prepregs. The sizing W 2020 is purposely formulated for excellent adhesion with epoxy resin systems and leads to superior interfibre and interlaminar shear strengths as well as dynamic performances. The specific boron free glass formula-tion provides superior hydrolysis and corrosion resistance. These properties improvements versus typical E-glass will help blade desi-gners to push further the limits of glass fiber blade designs, especially for the long blades required for the multi MW turbines for on shore and off shore. The W 2020 roving is approved by Germanischer Lloyd for the use in wind turbine rotor blades.

E-QX 9000 is a E-Glass fiber type.

Godiplast PEEK(G) 8900G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

3B Fiberglass SE 3030 consist of conti-nuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. SE 3030 Direct Rovings made of Advantex® glass are specifically desi-gned for multipurpose applications/processes such as the production of Non Crimped Fabrics, prepreg, filament winding, pultrusion, etc. The sizing of SE 3030 Direct Rovings is compatible with multiple resins: i.e. polyester, vinylester and epoxies. SE 3030 Direct Rovings present high level of fatigue performances, supe-rior interfibre and interlaminar shear strengths.

Polynt Group 781-2140 - vinyl ester infusion resin, unpromoted with a high HDT with blister and corrosion resistance; when formulated as recommended, meets the requirements of FDA title 21 CFR 177.2420. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, chemical industry, composites, food contact, industrial sector, marine, mass transports, paper industry etc.

E-QX 3500 is a E-Glass fiber type.

E-LT 1800 is a E-Glass fiber type.

Godiplast PEEK(GF) 8800GF30 is a Glass reinforced resin particle, standard viscosity, beige color and capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.