Products in Power, Water & Utilities: Corrosion Resistant

Godiplast PEEK(GF) 8200GF30 is a Glass reinforced resin particle, standard viscosity, beige color and capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Godiplast PEEK(GF) 8800GF30 is a Glass reinforced resin particle, standard viscosity, beige color and capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

SURFITEX™ E 50 L is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.

Duro-Bond Hypalon is an elastomeric sheet lining having excellent abrasion, heat, and corrosion resistance.. It is available either as a precured lining or as an uncured lining that must be vulcanized with steam or hot air cured before it can be used.

Godiplast PEEK(G) 8900G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Verkid® SMC H154 is used in hot press, compression molding for the production of large parts with high mechanical properties and excellent surface finish. It is a glass fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives.

C-LT 1100 is a carbon fiber type.

Conformat® N720 is a continuous strand, glass fiber reinforcing mat. N720 is a semi-porous reinforcing mat developed specifically for pultrusion applications requiring reinforcement and enhanced surface appearance.

C-2QX 4600 is a carbon fiber type.

E-LT 1800-P is a E-Glass fiber type.

Conformat N700 is a continuous strand, glass fiber reinforcing mat. N700 is a semi-porous mat most frequently used in flat or slightly contoured parts manufactured by Compression Molding, Closed Mold Injection, Resin Transfer Molding (RTM) and Glass Fiber Reinforced Gypsum (GFRG) processes. Parts produced using N700 have excellent trimming and punching qualities. N700 is produced with a 5 mil thick surfacing veil on both surfaces for improved surface qualities on finished parts.

E-QX 2600 is a E-Glass fiber type.

E-QX 5600 is a E-Glass fiber type.

Godiplast PEEK(CF) 8200CF30 is a Carbon reinforced resin particle, standard viscosity, black color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

E-LT 1200-P is a E-Glass fiber type.

C-4QX 9400 is a carbon fiber type.

Conformat N863 is a continuous strand, glass fiber reinforcing mat. N863 is porous, very conformable making it an excellent reinforcing mat for complicated contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding, Closed Mold Injection, and many other closed molding applications.

GraphCOND® graphite-based conductivity additives, you get a consistent combination of electrical conductivity and thermal conductivity. The conductivities in the end product are more or less highly defined depending on the graphite grade and degree of filling.

Ilkalem AS PV-200 is Bisphenol-A epoxy vinylester resin for GRP applications.

E-QX 9000 is a E-Glass fiber type.

Polynt Group 781-2140 - vinyl ester infusion resin, unpromoted with a high HDT with blister and corrosion resistance; when formulated as recommended, meets the requirements of FDA title 21 CFR 177.2420. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, chemical industry, composites, food contact, industrial sector, marine, mass transports, paper industry etc.

Electro Chemical Engineering EC Duro-Bond Chlorobutyl is an uncured chlorobutyl elastomer applied in sheet form and vulcanized after application using exhaust steam. Sheet thicknesses of 120 mils (2.3 mm), 150 mils (3.4 mm), and 180 mils (4.6 mm) are available.

E-QX 3500 is a E-Glass fiber type.

Polynt Group 787-5995 - toughened vinyl ester resin core shell rubber that offers dramatically improved fracture toughness and corrosion resistance of typical vinyl ester resins; promoted for room temperature cure. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

Verkid® BMC PX4 is a fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives. Generally thermoset unsaturated polyester or vynil-ester resins are used as organic matrix. With the aim of enhance its characteristics and improve its transformation, other components are added: catalysts, inhibitors, thermoplastic additives, demoulding agents, thickeners and pigments.

Godiplast PEEK(GF) 8900GF30 is a Glass reinforced resin particle, standard viscosity, beige color and capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

C-L 0900 is a carbon fiber type.

PTFE NEEDLE FELT is brown ,white in color.

C-LT 2200 is a carbon fiber type.

Godiplast PEEK(G) 8100G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Corex Polypropylene honeycomb is the idealcomponent for any lightweight assembly. It is extremely light but very strong. It provides high stability at a low weight and is resistant to both heat and corrosion.

3B Fiberglass W 3030 are specifically designed to provide significantly higher modulus, strength and enhanced fatigue performances versus traditional E-glass for wind tur-bine blades made out of unsaturated polyester, vinylester or Epoxy resin. HiPer-texTM W 3030 Rovings are per-fectly suited for the production of high modulus Non Crimped Glass Fabrics. The sizing W 3030 is purposely for-mulated for excellent adhesion with polyester, vinylester and Epoxy resin systems and leads to superior interfibre and interlaminar shear strengths as well as dynamic performances. The specific boron free glass formula-tion provides superior hydrolysis and corrosion resistance. These properties improvements versus typical E-glass will help blade desi-gners to push further the limits of glass fiber blade designs, especially for the long blades required for the multi MW turbines for on shore and off shore.

C-LT 1800 is a carbon fiber type.

Godiplast PEEK(FC) 8800FC30 is a Wear resistent abrasion reinforced resin particle, standard viscosity, black color and capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

SWANCOR 2591 is a hot-melt epoxy resin with low temperature curing and low exothermic properties. The formula does not contain Diuron and volatile ingredients. It has the characteristics of light weight, excellent mechanical strength, heat resistance and corrosion resistance.

SURFITEX™ E 30 L is a synthetic veil, designed to generate a high-quality surface during production of FRP components, including pipes, tanks, façade panels and wind blades. Surfitex™ is manufactured from 100 % polyester fibers, which are hydro-entangled with highpressure jets of water, with no chemicals added, which means there is no risk of chemical contamination of the resin. This material is highly suitable for pultrusion, filament winding, RTM, vacuum infusion and hand lay-up processes.a