Products in Power & Utilities

Polynt Group 25 series gelcoats are formulated from premium polyester resins and fire retardant additives to achieve optimal fire retardancy properties and low slow smoke development. They are suitable for applications requiring a surface with resistance to flame spread and smoke development.

Granulime are pulverized limestone products which are produced by grinding and screening industrial-grade limestone and dolomite.

NORSODYNE® H 13157 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through hand lay up and spray up method.

TURBEX 68 is a high performance multipurpose mineral turbine oil which is produced from high quality mineral base oils and several kinds of special additives.

Norsodyne® 21033 - promoted and non-waxed, good weathering properties, good water resistance.

Norsodyne® G-650STHY - thixotropic, preaccelerated, good workability. It is generally used in industrial sector applicatons.

Norsodyne® VUP-6800 - terephthalic resin for SMC-BMC, high strength , good surface gloss. It is generally used in industrial sector applicatons.

Sudaglass Fiber Technology BT8 is a tough fireproof fabrics, these fabrics are manufactured to varying thickness, weight, weave pattern and weaving technique according to end-use requirements.

Polynt Group BMC EP 21 GF - structural material reinforced with fiber glass 45% . Excellent mechanical properties and heat resistance. It is generally used in industrial sector applicatons.

APCM DA 4082 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

WESCOAT® CX01P6 is a coating product that will guarantee performance and longer lifespans. WESCOAT® CX01P6 addresses the chemical problems and wear and erosion problems.

POLYGEL 969 - Easy to sand when cured; easy application by electrostatic painting; reduces waste during application onto the substrate. Main Applications areas are Composites,Industrial sector,Mass Transports,Railway Sector etc.

DISTITRON® 414 CV3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,injection molding,rtm method.

Norsodyne® 2625NP - non-promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Norsodyne® 2625 - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Polynt Group 730-2295 - low profile resin for infusion and RTM applications; cosmetic or Class A finish. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Wynca XHG-6330 is a two-component, low viscosity liquid silicone rubber designed for electric and electronic potting. It is flame retardant and provides good dielectric property and excellent resistance to temperature extremes.

Godiplast PEEK(CF) 8900CF30 is a Carbon reinforced resin particle, standard viscosity, black color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Armorflex® 960 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector etc.

ARMORSTAR VE IVSXH210 is generally used in Automotive,Building and Construction,Composites,Industrial sector,Marine,Mass Transports,Mold manufacture applications.

Larderel® Zinborel HP has its applications in plastic industry as flame retarder and smoke suppresser in particular in electronic applications where a very low heavy metal content is relevant; in the wood industry as preserver and flame retarder; in the wood-plastic composites industry.

Godiplast PEEK(G) 8800G is a Pure resin particle, hypocrystalline, standard viscosity, beige color, capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

Godiplast PEEK(GF) 8200GF30 is a Glass reinforced resin particle, standard viscosity, beige color and capable for plastic forming process like injection, squeeze etc. Polyetheretherketone (PEEK) is an engineering high-performance plastic with particular advantages over other engineering plastics. With 260 ° C high temperature resistance, excellent mechanical properties, good self-lubricating properties and excellent chemical corrosion resistance (except strong nitric acid and concentrated sulfuric acid). Flame retardant, peel and wear resistant, anti-radiation: such excellent mechanical properties can be used for nuclear engineering, aerospace science and technology.

SMCarbon® 24CF60-3K - Sheet molding compound based on vinyl ester resin and reinforced with carbon fibers designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

Norsodyne® BR-270A - multicolor application, flexible type, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

SMCarbon® 90CF50-3K - Sheet molding compound based on epoxy resin and reinforced with carbon fibers designed for compression molding technology. This epoxy based SMC is suitable only for application with thickness of 15 mm at maximum.

Polynt Group Polygel 31 - orthophthalic gel coat; used in manufacture of FRP parts to be painted; excellent sanding properties and good elongation. Main applications areas are composites, industrial sector, mass transports etc.

Acetal POM H is a polyoxymethylene homopolymer. It is used in various Industry.

Stypol® 040-0881 - resin for pigment paste formulation, monomer-free. It is generally used in inks and pigments applicatons.

DISTITRON® 1629 XYQ - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

NORSODYNE® M 46073 - Unsaturated polyester resin in styrene,Isophthalic. It is used as general purpose in injection molding,rtm method.

EPOVIA RF-2050SE is Chlorendic anhydride (HET acid) based unsaturated polyester resin. Main Applications areas are Building and Construction,Chemical Industry,Industrial sector etc.

Aquamag® is a high-quality magnesium hydroxide (Mg(OH)2) slurry that is a Generally Recognized As Safe (GRAS) chemical due to its non-hazardous and environmentally-friendly nature. Exclusively manufactured in the United States, from source to end-product, Premier Magnesia, LLC maintains the highest production standards when it comes to reactivity, consistency and reliable supply, ensuring a delivered product that you can depend on to meet your needs. AQUAMAG is considered a weak base that has a pH of 10.5 in its natural, delivered state. Nevertheless, it acts as a strong buffer, capable of neutralizing acids of all concentrations to roughly the 9.0 pH range.

Epovia Optimum® KRF-3100 is bisphenol-A epoxy vinyl ester resin for pultrusion with low foaming, fast cure and it is generally used in industrial sector applicatons.

NORSODYNE® M 01075 - Pure maleic unsaturated polyester resin in styrene. It is used to produce bmc and smc manufacture,good superficial appearance through hot press molding,pultrusion method.