Brands in Paints & Coatings

Pinerez® tackifier resins are recommended to enhance the adhesive performance in Hot melt and solvent-based adhesive applications. They are stabilized, light-colored resins with excellent viscosity stability, and have excellent compatibility with a range of polymers that are widely used in packaging and pressure-sensitive adhesives.These polymers include EVA, SIS, and SBS block copolymers, natural and synthetic rubber, and acrylics. Low VOC Pinerez products provide performance value in water-based, solvent-free flooring adhesives.

Pergopak® flatting and matting agents are organic thermoset polymethyl urea resins (PMU) offering significantly different performance advantages and benefits versus typical silica and polypropylene type flatting agents. Pergopak products help formulators of industrial coatings, inks and overprint varnishes to achieve a higher performing balance of low gloss, rheology, abrasion resistance, coin-marking, water resistance, chemical resistance, heat resistance and soft feel - that they are unable to achieve with silica or wax flatting agents alone.

HydroBlok® sealer is a waterborne, non-flammable, silicate penetrating solution it is specifically designed as a concrete sealer/densifier for stopping moisture migration or major seepage of blocks, concrete decks slabs, walls, driveways, foundations or old porous concrete. HydroBlok® is produced specifically for sealing heavyweight CMU (concrete masonry units). This is a user friendly product that will seal CMU structures under the most difficult conditions and leave the concrete blocks paint-able if desired. This spray on product is designed for new or old heavyweight CMU structures and will seal your blocks easily and effectively.

St. Louis Group offers a wide range of highly effective liquid & powder phosphorus based flame retardants. Specialty dispersions, blends, and masterbatches are available upon request.

1,2-benzisothiazolin-3-one or BIT (CAS: 2634-33-5), the primary active ingredient in Arxada's Proxel® range, is widely recognized as one of the most versatile, compatible and trusted broad spectrum preservative solutions available for the Home Care market. Aside from single-active products based on BIT alone, the Proxel® range also encompasses cost-effective and specialist blends with carefully-identified co-actives providing flexibility of choice for difficult-to-preserve systems. Proxel® GXL and Proxel® AQ have been pre-approved by the EPA for use in Safer Choice labeled products and have been reviewed by NSF International’s Sustainability Program. For consumers the Safer Choice logo provides recognition that the product has been evaluated for its effect on the environment and human health. Utilizing ingredients that are considered the safest in their class. Safety without sacrificing quality or performance.

LPA-202™ is a Class "A" flame retardant additive for all latex paints. It covers 200 sq. ft. per gallon with instructed application and can be used as spray or applied by paint roller or brush.

NACORR® Liquid Rust & Corrosion Inhibitors provide corrosion resistance for solventborne and waterborne systems. NACORR can be used as the primary corrosion inhibitor or in combination with anticorrosive pigments. NACORR products exhibit synergy with anti-corrosive pigments improving the salt spray resistance of the coating.

Looking for a selectively removable and on-demand product, according to timeline, budget and high standards? BronzeShield® is the product you need. No sandblasting, xylene or toluene are needed. When the time comes to remove the clear protective coating, apply a zero-VOC non-toxic remover safe for all metal surfaces and perfect for vertical and hard to reach places.

Acronal® is a range water-based emulsions. Acronal® range for exterior paints covers styrene and pure acrylics which offer a very high durability against the influence of weathering. Acronal® range for wood and trim paints offer a very high durability against the influence of weathering. In addition, our styrene acrylics have an outstanding chemical resistance, which is very important for exterior applications. BTC’s range of Acronal® dispersions covers both selfcrosslinking and non selfcrosslinking dispersions. BTC’s range of Acronal® types give decorative foils, filters and wallpaper excellent mechanical properties. In air and oil filters for the automotive industry they improve durability and performance. In high-quality decorative paper foil, our binders ensure a high level of stability of the bonded fibers. To abrasives our binders ensure the abrasives flexibility and reduce abrasive particle wear. BTC’s Acronal® types for natural fibers are acrylic dispersions. BTC’s range of Acronal® types give nonwovens made of synthetic fibers their exceptional and different functional properties.

Classic™ is exceptional wood protection system for logs, timbers and exteriors where a beautiful, natural, low luster finish is desired. Classic is deep penetrating and can be applied to wood of variable moisture contents.

LIPOXOL, polyethylene glycol (PEGs), are essential auxiliaries in numerous application fields like household products and also serve as intermediates for the manufacture of emulsifiers. LIPOXOL grades provide a unique property profile, combining high water solubility, lubricity and low toxicity with excellent solvent properties. Our LIPOXOL products have various functions in various industries including acting as a solvent in cleaners and a binder in detergents and tablets.

Michem Dispersion Urethanes are water based polyurethane dispersions that can enhance toughness, scratch resistance, water resistance and flexibility of coatings. Michem Dispersion Urethanes are useful for industrial wood, concrete, and metal substrates.

Lehigh offers MicroDyne™ MRPs in a range of particle sizes – from 830 microns (20 mesh) to 50 microns (300 mesh) – to fit a wide array of applications. Currently, Lehigh’s customers have deployed MicroDyne™ MRPs in plastics, asphalt, construction, coatings and other applications as well. MicroDyne™ can be made from tire rubber material, natural rubber, nitrile rubber, butyl rubber or EPDM rubber.

Firetect Manufacturing creates flame retardant paints and fire retardant coatings and saturants. We work with our clients on flame retarding not only for fabrics, but also for wood, foam, vinyl, leather, mattresses, paper, and even foliage, straw and hay.

VersaFlex AroStruct is a fast set, rapid curing, 100% solids, semi-structural, two-component performance modified polyurea spray coating/lining material. Its fast gel time makes it suitable for applications down to -20°F without special conditioning of the component resins and isocyanates. AroStruct produces an extremely tough rigid film at all thicknesses.

Graxy Graphene Epoxy resin provides an easy way to produce high-performance graphene-zinc epoxy primers, which aim to replace the zinc-rich anti-corrosion primers.

Colorfast™ strengthens the glue that binds the wood cells together, called lignin, preventing yellowing of the underlying wood cells to help maintain a consistent color year after year. Before staining, Colorfast™ evens out wood porosity, creating a smoother surface for stain application and preventing over-absorption and a too-dark color. After staining, the lignin stabilizers prevent the wood underneath from getting sunburned, leaving the stain applied on top looking the same year after year. Colorfast delivers the ideal canvas for stain application and leaves behind the strong foundation necessary for long-lasting color.

Waterborne epoxy dispersion and epoxy hardener for lower-VOC, high-performance anticorrosion industrial and construction coatings

Tinuvin® light stabilizers show best performances regarding their thermal stability, substrate compatibility, volatility, absorption range, or regulatory classification as needed. BTC’s Tinuvin® light stabilizers provide effective protection against UV absorption for inks and printing.