Products in Decorative Paints: Lacquers

Domalkyd 1673 60 D-60 is an alkyd resin modified with soybean oil designed for decorative paints and lacquers for metal and wood, for indoor and outdoor applications.Features & BenefitsGeneral binderGood flowExcellent brushability and fullness

C - EAGLE (PA 7/45) is modified acrylic copolymer emulsion with excellent water non-whitening resistance, block resistance, dirt pick-up and chemical resistance. Use for wood coatings, decorative paints, industrial coatings,parguet lacquers, metal and plastic top coats. APEO free.

Eagle Chemicals EAGA CRYL-190 is modified acrylic copolymer emulsion for use in decorative and industrial coatings with low coalescent demand and good blocking resistance.

Balkyd 630S-70WS is a long oil oxidative drying alkyd resin, modified with vegetable oil,soyabean or sunflower oil.

Balkyd 610S-60WS is a long oil oxidative drying alkyd resin, modified with vegetable oils.

PPG LO-VEL® 66 flatting agent is a synthetic amorphous silicon dioxide, wax-treated flatting agent designed to reduce the gloss of lacquers and industrial coatings.

BAS 310 X-60 is a short oil alkyd resin based on soybean oil fatty acid which offers very good hardness, surface and deep drying, adhesion, flexibility and pigment wetting and dispersing.

Hunan Three-Ring Pigments Iron oxide yellow G313-310 have excellent physical and chemical properties. Strong hiding power, high tinting strength, soft color, stable performance, alkali resistance, stability to weak acid and dilute acid, excellent light and weather resistance, insoluble in water and organic solvents, excellent rust prevention Anti-ultraviolet and other effects.

Nepa Fast Blue 43153-PA is used in Paints

PPG LO-VEL® HSF flatting agent is a synthetic amorphous silicon dioxide designed to reduce the gloss of high-solids, low volatile organic compounds (VOC) coatings.

BAL 108 WS-70 is a long oil alkyd resin based on soybean oil fatty acid which offers excellent hardness, surface and deep drying, gloss and gloss retention and adhesion.

POLYTONE™ M 130 is used for improving the film hardness of nitrocellulose and chlorinated rubber paints.

SafSil® CT200 are high performance functional fillers that contain less than 0.1 % respirable crystalline silica and are commonly used in both water and solvent-based paints and coatings. SafSil® may be used successfully to replace many common fillers such as ground silica, nepheline syenite, calcium carbonate, and talc.

NOVALKYD L1664-60ANWS is a special long oil alkyd for impregnations and paints on wood and porous substrates.

ADDAPT PolySurF HPH is a solvent-free UV-curable additive. It can also act as a polymerisable hydrophilic non-ionic surfactant and/or co-polymerisable plasticizer. It is a proprietary mixture of Acrylated mono- and di-Phosphate ester; the mono-Phosphate ester being O-(EO)n>10-CH3 modified; where the reactive Acrylate group is Methacrylate

RARAALKYD SO-3603 XL is a short oil alkyd with excellent gloss and hardness in stoving enamels and excellent yellowing resistance in nitro cellulose lacquer along with excellent hardness and flexibility.

Hunan Three-Ring Pigments Iron oxide yellow G313 have excellent physical and chemical properties. Strong hiding power, high tinting strength, soft color, stable performance, alkali resistance, stability to weak acid and dilute acid, excellent light and weather resistance, insoluble in water and organic solvents, excellent rust prevention Anti-ultraviolet and other effects.

Inokem® UR 3301 is a surfactant-free self-emulsified urethane modified alkyd emulsion of medium oil length for air-drying water-borne outdoor resistant coatings.

Balkyd 630S-60WS is a long oil, oxidative drying alkyd resin, modified with vegetable oil.

POLYTONE™ M 131 is used in Varnishes, Paints and Over Print Varnishes, N.C. Lacquers etc.

Kamicryl 5010 Thermoplastic Acrylic Resin is an Co-polymer of various Acrylic Monomers available in free flowing solids and solution form. These are extensively used in the formulation of Lacquers and speciality coatings.

Balkyd 610S-70D60 is a long oil oxidative drying alkyd resin, modified with vegetable oil – soya or sunflower oil.

BAS 307 X-60 is a short oil alkyd resin based on coconut oil fatty acid which offers excellent hardness, gloss and gloss retention and adhesion.

Balkyd 610S-60D40 is a long oil oxidative drying alkyd resin, modified with vegetable oils.

Balkyd 610FA-70WS is a long oil oxidative drying alkyd resin, modified with distilled fatty acids.

NOVALKYD M1005-50AN is a resin suitable for econimical enamels with good overall performances in termof drying and color retention. It is also good for wood flatting, antirust primers and sealers.

PPG LO-VEL® 39A silica is a highly efficient synthetic amorphous silicon dioxide flatting agent designed to reduce the gloss of texturized finishes.

Nepa Fast Blue 43754 is used in Paints & Liquid Inks

Balkyd 644TFA-70D40 is a long oil, oxidative drying alkyd resin, modified with tall oil fatty acids.

Nigtas 1 has its applications in Water based Interior / Exterior Paints, Primers and Pastes, Long Oil Synthetic Paints, Rapit based Industrial Paints, Short Oil Cellulosic Paints, Road Marking Paints, Marine Paints, Furniture Paints, Epoxy Paints, Printing Inks, Static Powder Coatings.

SafSil® CT450 are high performance functional fillers that contain less than 0.1 % respirable crystalline silica and are commonly used in both water and solvent-based paints and coatings. SafSil® may be used successfully to replace many common fillers such as ground silica, nepheline syenite, calcium carbonate, and talc.

Secoia® 1400 is an APEO free, anionic emulsion of a bio sourced alkyd resin, with a renewable materials content of 95%. It is intended for “green” paints and lacquers exhibiting a cost/performance balance allowing an interesting opportunity against best acrylics. Secoia 1400 can be formulated without any solvent and with very low VOC/SVOC and no odor.

Balkyd 610S-70WS is a long oil oxidative drying alkyd resin, modified with vegetable oil – soya or sunflower oil.

SafSil® CT550 are high performance functional fillers that contain less than 0.1 % respirable crystalline silica and are commonly used in both water and solvent-based paints and coatings. SafSil® may be used successfully to replace many common fillers such as ground silica, nepheline syenite, calcium carbonate, and talc.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.