Products in Agricultural & Construction Equipment

The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

HydroCER EC-36 is a 35% APEO-free carnauba wax emulsion in a stable anionic surfactant system. The HydroCER products are wax emulsions, dispersions, or a combination of these.

Hydrocer 357 is a stable, non-ionic aqueous spherical synthetic wax dispersion. The Hydrocer products are wax emulsions, dispersions, or a combination of these.

Life-Kote 98 Series is a two-component, high solids, polyamide-cured, epoxy primer designed for use on interior or exterior substrates that require both extra flexibility as well as an extra corrosion resistant base for high performance topcoats. This product offers excellent adhesion to both the surface and the topcoats that follow. Highly resistant to many alkalis, solvents, and other active chemicals and provides excellent substrate protection in chemical and atmospheric environments. 98 Series can be top coated with converted epoxy topcoats, acrylic urethanes, and other high performance coatings.

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

Life-Kote 74A02/74P02 Series DTM 302 g/l VOC is a two component, high solids, high-build, V.O.C. compliant, hybrid acrylic mastic urethane system designed to produce a highly weatherable, durable, and flexible finish for the high performance coating markets. 74 Series is the ultimate coating in color and gloss retention. This tough, abrasion resistant finish performs its best in the areas of gloss and color retention by outlasting conventional coatings in severe sun exposure by 3 to 1. 74 Series must be catalyzed with 8015 Urethane Catalyst only. Mix ratio is 4 to 1. 8015 catalyst is included with the base product in kit form. Mixed material will have a 2-4 hour pot life.

Jalpon™ 5312 is a high solids, lower VOC rust preventive concentrate comprised of gelled calcium sulfonate, oxidate, waxes and other ingredients which yields a relatively dripless, long term waxy rust preventive coating.

High brightness, work-horse calcined kaolin clay, extremely low crystalline silica content.

S-394-N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes

FluoroSLIP® 225 is a blend of low molecular weight synthetic wax and PTFE.

S-400-N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

TCI Powder Coatings CNH Black Primer 3P 86628057 (9720-91950) is a TGIC polyester coating formulated as the universal product line that is also available in a broad spectrum of colors, while providing very good performance and application properties.

WSCM-1154 has low viscosity, faster curing speed and improved bonding strength, excellent paint film appearance and adhesion to the concrete surface.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

T UV Blue 70 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

CHS-EPOXY 171 is a Low molecular weight "1,5 - type" epoxy resin.

UNISIL SRH 7 is a light-yellow to dark-brown transparent liquid. It is a solution of polyester-modified polymethylphenylsiloxane resin in organic solvent such as xylene.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Araldite® GT 6084 is an unmodified solid epoxy resin based on Bisphenol A.

CHS-EPOXY 141 is a Low molecular weight "2,5 - type" epoxy resin.

Flowing agent for powder coatings Lu'An Jietonda New Material SA88 is a flow agent which can be used for any powder coating system such as EP.PES/EP hybrid ,PES/TGIC.PES/Primid and PU etc .

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

Talc MP 70-22 is designed for use in a wide variety of applications which can benefit from talc’s platy particle shape, highly oleophilic surface and softness that do not require high dry brightness. Typical applications include sealants and caulks, joint compounds, spackles and texture coats, and other construction and agricultural products.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

Razeen® SR 5013 is a solid, unmodified Bisphenol A epoxy resin.

Razeen® SR 5174 is a solid, Bisphenol A epoxy resin modified with 5% flow modifier.