Products in Agricultural & Construction Equipment

Enviro-Finish 49 Series Primers is a hybrid waterborne primer system designed for the segment of the OEM Market that requires a VOC compliant coating to replace their conventional alkyd system. 49 Series is designed for Direct-To-Metal (DTM) applications. Formulated to provide greater wet adhesion to water ponding and greater resistance to water spotting and wrinkling which are common problems among water based systems exposed to moisture too early.

HydroCER 605 is a 50% active blend of high molecular weight polyethylene (PE) and polytetrafluoroethylene (PTFE) dispersed in water.

High brightness, work-horse calcined kaolin clay, extremely low crystalline silica content.

HydroCER 7410 is a 45% aqueous dispersion of medium molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

S-483 is a spherical synthetic wax with a DSC melt peak above 110°C. It has good onset of melting and low crystallinity. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

Life-Kote 98 Series is a two-component, high solids, polyamide-cured, epoxy primer designed for use on interior or exterior substrates that require both extra flexibility as well as an extra corrosion resistant base for high performance topcoats. This product offers excellent adhesion to both the surface and the topcoats that follow. Highly resistant to many alkalis, solvents, and other active chemicals and provides excellent substrate protection in chemical and atmospheric environments. 98 Series can be top coated with converted epoxy topcoats, acrylic urethanes, and other high performance coatings.

SPP-300 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

SPP-25 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

MasterTouch 90C05 Clear Base is a high performance, fast drying silicone modified enamel designed for high temperature applications that require a coating to withstand continuous temperatures of up to 400°F with no loss of adhesion. However temperatures over 250°F may cause discoloration in some colors. This high performance product is single component and meets V.O.C. regulations of 5.42 lbs/gal (650g/l) for high temperature coatings.

S-375 is a synthetic wax with a DSC peak melt around 100°C and the corresponding low onset of melting. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

GP® CL-7002 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

Hydrocer 7112 is a stable, aqueous synthetic wax dispersion. Keep the lid tight on the container to avoid separation. If this product has separated, simple mixing with paddle or propeller mixer is all that will be required. The Hydrocer products are wax emulsions, dispersions, or a combination of these.

TexMATTE 6005 is a cross-linked polymethyl methacrylate product.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

SST®-2 is a white low MW PTFE micropowder with particle size distribution at a mean value of 8 µm. SST®-2 products are Shamrock’s PTFE micropowders that are defined by particle size and distribution, molecular weight, crystallinity, surface area, oil adsorption, powder flow, and color. Made primarily from highly controlled recycled PTFE feedstocks, SST® products are used for their ability to produce slip, nonstick, water repellency, texture, release, rub, and abrasion resistance to surfaces.

FluoroSLIP® 533 is a blend of hydrophilic synthetic wax and PTFE where the synthetic wax shows a uniform melting range peaking at 97°C.

K-FLEX® XM-B301 is a low-viscosity, acetoacetate functional reactive diluent with excellent compatibility with a wide range of resins. It is primarily recommended for use in epoxy/polyamide primers, but can also be used in systems crosslinked with amino resins or polyisocyanates.

S-400-N1 is micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

Enviro-Finish 40A03 is a high performance waterborne acrylic enamel designed for the segment of the OEM Market that requires a VOC compliant coating to replace its conventional alkyd system. 40 Series is designed for Direct-To-Metal (DTM) applications or can be used over our 49 Series primer for extra corrosion protection. Formulated to provide extra early resistance to water spotting and wrinkling which are common problems among water reducible alkyd enamels exposed to moisture too early.

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

POLYCHEM 7482-PMA-90 solids short TOFA alkyd for use in general industrial bake finishes. It is typically modified and crosslinked with aminoplast resins. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).

S-395-N5 is a synthetic wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

SPP-10 is a low molecular weight polypropylene texturing agent. The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

Life-Kote 74A02/74P02 Series DTM 302 g/l VOC is a two component, high solids, high-build, V.O.C. compliant, hybrid acrylic mastic urethane system designed to produce a highly weatherable, durable, and flexible finish for the high performance coating markets. 74 Series is the ultimate coating in color and gloss retention. This tough, abrasion resistant finish performs its best in the areas of gloss and color retention by outlasting conventional coatings in severe sun exposure by 3 to 1. 74 Series must be catalyzed with 8015 Urethane Catalyst only. Mix ratio is 4 to 1. 8015 catalyst is included with the base product in kit form. Mixed material will have a 2-4 hour pot life.

Life-Kote 92G19 Series Gray Primer is a premium high performance, fast drying, corrosion resistant metal primer containing rust inhibitive pigments for interior and exterior applications. This TTP-664 primer may be used as a barrier coat to permit vinyls, epoxies, or other strong solvent containing top coats to be applied. Adheres tightly to clean metal and to topcoats. Contains no lead, chrome or other heavy metal compounds. VOC compliant.

Master Touch 80 Series is a high performance, acrylic modified, gloss alkyd enamel that provides a very durable, tough, high gloss finish for a wide variety of interior or exterior substrates including wood and ferrous metal surfaces. Meets performance specifications of TT-E-489G and TT-E-506K. Acrylic modification makes this alkyd enamel perform much better than a conventional alkyd enamel in the areas of durability, adhesion, color retention, flexibility, sag resistance, and wet edge retention. This extremely durable product is single component, but can be cross- linked with our 8000 Polyurethane Converter when stringent specs require extra gloss, color retention, and corrosion resistance.

S-NAUBA 5021 is a concentrated blend of carnauba and synthetic wax showing melting peaks ranging from 84 – 110°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

PowderTEX 94 is a pure polytetrafluoroethylene (PTFE) developed as a texturing agent for powder coatings.

Life-Kote 72 Series “Bullet Proof” Urethane is a two component, high solids, VOC compliant, urethane system designed to produce a highly weatherable, durable, and flexible finish for the high performance coating markets. 72 Series is the ultimate coating in color and gloss retention. This tough, abrasion resistant finish performs its best in the areas of gloss and color retention by outlasting conventional alkyds in severe sun exposure by 3 to 1. Must be catalyzed with 8002 Urethane Catalyst. Mix ratio is 2 1⁄2 parts Base to 1 part catalyst, by volume. 8002 catalyst is included with product. Mixed material will have a 2 hour pot life.

Jalpon™ 5312 is a high solids, lower VOC rust preventive concentrate comprised of gelled calcium sulfonate, oxidate, waxes and other ingredients which yields a relatively dripless, long term waxy rust preventive coating.

Staticide® 8696 Urethane Conformal Coating is a super tough coating with excellent chemical resistance. It protects against acidic and alkaline substances, making it an ideal choice for many general applications such as HVAC, fire alarms, relays, generators, motors, transformers, and battery-operated devices. Being ACL's hardest transparent conformal coating, it will not crack, yellow, or discolor over time under normal use. It provides outstanding protection without RoHS or REACH SVHC chemicals.

HydroCER 584 is a 35% aqueous dispersion of high molecular weight polyethylene wax. The HydroCER products are wax emulsions, dispersions, or a combination of these.

S-363 is a synthetic wax alloy showing melting peaks ranging from 92 – 141°C. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

FluoroSLIP® 225 is a blend of low molecular weight synthetic wax and PTFE.

HydroCER EC-36 is a 35% APEO-free carnauba wax emulsion in a stable anionic surfactant system. The HydroCER products are wax emulsions, dispersions, or a combination of these.

S-400-Q is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 108 – 146°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.