Products in Agricultural & Construction Equipment

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

T Cerise 13 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

Terachem® 53 acrylic urethane for high-performance urethane and epoxy coatings

ADDAPT® Anticor A84 is a water-soluble multi-metal anti-corrosion additive. It is a proprietary blend of Organic Acids salts and Silanes. All constituents are EINECS registered and comply with the FDA regulation.

Reacrone PCL-440 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Teraflow® 5000 contributes to a smooth film in water-based latex systems, urethanes, water-reducible and water-dispersible alkyd and polyester formulations for both air-dry and baking applications. At 40% active, the product offers a well-balanced surface-active functionality that provides an excellent combination of hydrophilic and hydrophobic attributes, allowing the formulator to optimize the dispersion of almost all pigments and extenders.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

MONORAL 3300 K is an unique synthetic amide wax applicable to a wide range of solvent base synthetic resin coating and develops an exceptionally strong and long lasting thixotropic structure.

Concentrated pigment dispersions based on a modified long oil alkyd for tinting and masstone applications in solvent based architectural paints and light industrial coatings. PanTINT 87 Colorants have exceptionally broad compatibility, low viscosity and excellent stability

Leveling agent for powder coatings Lu'An Jietonda New Material K7572 is a white powder based on an acrylate polymer active ingredient. It is used in powder coatings to significantly improve the melt flow of the system and has excellent leveling properties.

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

A daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

IGP-DURA® face 5809 is a weather resistant, gloss coating system on a saturated polyester resin base, the corresponding hardener plus special heat, light and chalk resistant pigments.

CHS-EPOXY 160 is a Low molecular weight "2 - type" epoxy resin.

TriPrime™is a high-solids, solvent-reducible primer for iron and steel that dries quickly. It is intended for use in shop and CEM applications, as well as under all common finishes, including polyurethanes. TriPrime™ is intended for hand-cleaned iron and steel SSPC-SP1, SP2, or SP3, and provides active corrosion inhibition and undercutting protection. It is intended for HVLP and air assisted airless systems, but it can also be used with conventional or airless systems where legal. Most systems require thinning; see the instructions under "Recommended Thinning." Alkyd, silicone alkyd, and acrylic topcoats are all recommended.

EFDEDUR-UHS Singlelayer UR1422 is used for Ultra-High-Solid singlelayer with solvent, Very high corrosion protection, Very good light and weather resistance, high-quality industrial coatings, such as agricultural and construction machines.

High strength colorants with broad compatibility in a wide variety of conventional and low VOC water based systems. PanTINT ® 90 Colorants are based on a proprietary combination of surface active agents for exceptionally broad compatibility and stable viscosity for easy use. They will not dry out in part full containers and have little or no effect on gloss, cure time, resistance to water spotting or exterior durability. They are freeze-thaw stable and will not support the growth of microorganisms

IGP-DURA® face 5803 is a weather resistant, mat coating system on saturated polyester resin base, the corresponding hardener plus special heat, light and chalk resistant pigments.

IGP-DURA® face 581M is Excellent light and weather resistance Impact-proof surface with decorative fine structure and effect Good elasticity Non-yellowing in direct-heat gas ovens.

High strength, APE free colorants with compatibility in a wide variety of conventional, low and zero VOC* water based systems. Easy to use PanTINT 94 Colorants are based on a proprietary combination of surface active agents resulting in exceptional system compatibility. They have little or no effect on viscosity, gloss, cure time, resistance to water spotting or exterior durability. They will not support the growth of microorganisms.

CHS-EPOXY 112 4F5 is a Modified by 5% of flow control agent.

Lu'An Jietonda New Material SA501 is a Film hardening agent for powder coatings.Jietonda® SA501 is a modified PTFE wax used for powder coatings to increase hardness and smoothness of film.

An ultra high-strength daylight fluorescent pigment for thinfilm solvent-based applications such as gravure and screen process inks. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

UTHANE® 55A-J014 Black Gloss High Solids 2K is a two component polyurethane with excellent hardness, and mar resistance. The coating can be cured by air dry or forced dry.

A daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

Super Lube® Multi-Purpose Synthetic Grease With Syncolon® (PTFE) NLGI Grade-2 21030 is a patented synthetic heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced and productivity is increased.

Avox® 380 PS is an aromatic highly functional polyester polyol. This material is made from recycled and renewable resources.

Technicure® IPDU-8, N-3-(dimethylamino) carbonylaminomethyl-3,5,5-trimethylcyclohexyl-N,N-dimethyl-urea, is a substituted urea. It is used as a dicyandiamide (DICY) accelerator in one-component epoxy resin based formulations. Typically the product is used with epoxy resin and dicyandiamide between 1-3 phr. The loading level of an accelerator will provide balance of low temperature reactivity and formulation shelf stability. Among all substituted ureas as DICY cure accelerators, IPDU-8 offers the most latency.

Cen-Pe-Co® Hy-Torque Gear Lube is a heavy-duty, multi-purpose, extreme pressure gear lubricant blended with 100% pure paraffin base oil. This gear lube is specially formulated for heavy and light trucks, off-highway equipment, farm equipment, industrial use, and passenger vehicles. Recommended for transmissions where gear oil is specified, and for all final drives and differentials, including limited slip differentials.

Alumazite ZY-138 is an aluminum filled corrosion inhibitive coating designed to prevent galvanic corrosion. It does not contain any chrome pigments. Alumazite ZY-138 has excellent adhesion to all metals and eliminates the commonly acknowledged dangers of hydrogen embrittlement, or diffusion stress cracking, as related to cadmium plating processes. Alumazite ZY-138 meets the requirements of NAS 4006, MIL-C-85614 and BMS 10-85.

Concentrated pigment dispersions for use in solvent borne high performance coatings. PanTINT 86 Colorants are based on a unique thermoplastic acrylic vehicle with exceptionally broad compatibility. Pigments used in the PanTINT 86 Series have been selected for superior lightfastness, and resistance to heat and chemical attack.