Products in Electronics Coatings

DEHESIVE® SF 201 AMA® is a solvent-free, addition-curing silicone fluid. It is designed for release applications and is applied with additional components on paper and filmic substrates. The fast cure properties of DEHESIVE® SF 201 AMA® allow for use with temperature-sensitive substrates or comparatively low platinum levels at standard conditions.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3352 is a polyester resin with excellent environmental friendliness using 5wt% of biomass material. It is a high Tg and a low molecular weight (Mw)-grade and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Heat-resistant Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-1588 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of ER-535 and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3399 is a polyester resin under development can be used for powder coating. It works well to keep color for a long time and has excellent mechanical strength by using curing agents such as TGIC and Primid (HAA) and Epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion Good mechanical strength Can be used with cross-linking agents   Benefits: Good heat resistance Durability High solid differentiation   Applications: Powder Coating For various types of inks Solventborne adhesive   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-1565 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of FC-1494 and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility Durability High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ ER-502 is a polyester resin with excellent solvent solubility. It is a high acid value and high molecular weight (Mw)-grade and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3294 is a polyester resin with excellent solvent solubility and is optimal as a binder for paints and inks. It exhibits excellent adhesion to plastic films, moldings and metals such as aluminum, copper, and iron. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent pigment dispersion. Can be used with cross-linking agents. Excellent chemical and weather resistance   Benefits: Solvent solubility High solid differentiation Durability   Applications: For various types of inks (Screen printing and inkjet, etc. )               PCM coatings      Solventless & High Solids Coating     *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3288 is a polyester resin with excellent pigment dispersibility. It is a low Tg grade and is optimal as a binder for paints and adhesives. By blending with a high Tg grade DIACRON, it exhibits excellent adhesion and bendability to plastic films, moldings and metals such as aluminum, copper and iron. It improves hardness, heat resistance and toughness by using additive such as isocyanates.   Features: Low Tg and excellent substrate adhesion Excellent chemical and weather resistance Excellent pigment dispersion   Benefits: Use of biomass raw materials Flexibility  Durability   Applications: PCM coatings Adhesives for films Binder for screen inks Heat seal   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3278 is a high Tg grade polyester resin with excellent environmental friendliness using 50wt% or more of recycled material. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion. Heat-resistant Contains 50% recycled material   Benefits: Good heat resistance Durability   Applications: Powder Coating  PCM coatings      For various types of inks    *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DEHESIVE® 982 AMA® is a solvent-free, addition-curing silicone fluid specifically developed for release applications. It is applied, along with additional components, onto paper and filmic substrates. This product is an essential component of a multicomponent release coating system used in the production of paper and filmic release liners. These liners are widely utilized in the manufacturing process of both single- and double-sided industrial laminates.

Gelest (3- GLYCIDOXYPROPYL)TRIMETHOXYSILANE (SIG5840.0) is an epoxy-functional trialkoxy silane used as a component in aluminum metal bonding adhesives. This product functions as an adhesion promoter and coupling agent.

Gelest (3-ACRYLOXYPROPYL)TRIMETHOXYSILANE, 96% (SIA0200.0) is a comonomer for free-radical polymerization. This product functions as an adhesion promoter and coupling agent.

AFCONA 3250 is an additive designed to provide the highest slip in all solvent-based coatings without stabilizing foam. It is specially developed for all solvent-based systems where slip is the most important factor and foam stabilization is undesirable. AFCONA 3250 belongs to the same family as AFCONA 3230. But while AFCONA 3230 is effective only in polyurethane coatings, AFCONA 3250 works in all solvent-based coatings.

Dar-Tech Hauthane L-3528 is a Dar-Tech Hauthane polyurethane dispersion that provides tough, chemically resistant, glossy coatings. The product has excellent flexibility and gloss retention characteristics. It may be applied to a variety of substrates, including concrete, metals, plastics, and wood materials. It is primarily used in architectural coatings, consumer electronics, industrial maintenance, rigid and flexible PVC coatings, and wood floor coatings.

AFCONA 3251 is an additive designed to offer the highest slip in all solvent-based coatings without stabilizing foam. AFCONA 3251 is specially developed for solvent-based systems where slip is the most important factor and foam stabilization is undesirable. Its performance is similar to AFCONA 3250, only with better leveling.

CYTOP CTX-800A is an amorphous fluoropolymer that exhibits low refractive index, low coefficient of optical dispersion and good lamination properties. The thermoplastic characteristics of CYTOP CTX-800A, coupled with its transparency, solubility, insulation properties, resistance to chemicals, and oils/water repellency, make it a popular choice for coating electronic materials.

CYTOP CTL-809A is an amorphous fluoropolymer that exhibits low refractive index, low coefficient of optical dispersion and good lamination properties. The thermoplastic characteristics of CYTOP CTL-809A, coupled with its transparency, solubility, insulation properties, resistance to chemicals, and oils/water repellency, make it a popular choice for coating electronic materials.

CYTOP CTL-107MK is an amorphous fluoropolymer that exhibits low refractive index, low coefficient of optical dispersion and good lamination properties. The thermoplastic characteristics of CYTOP CTL-107MK, coupled with its transparency, solubility, insulation properties, resistance to chemicals, and oils/water repellency, make it a popular choice for coating electronic materials.

CYTOP CTX-809A is an amorphous fluoropolymer that exhibits low refractive index, low coefficient of optical dispersion and good lamination properties. The thermoplastic characteristics of CYTOP CTX-809A, coupled with its transparency, solubility, insulation properties, resistance to chemicals, and oils/water repellency, make it a popular choice for coating electronic materials.

CYTOP CTX-809SP2 is an amorphous fluoropolymer that exhibits low refractive index, low coefficient of optical dispersion and good lamination properties. The thermoplastic characteristics of CYTOP CTX-809SP2, coupled with its transparency, solubility, insulation properties, resistance to chemicals, and oils/water repellency, make it a popular choice for coating electronic materials.

CYTOP CTX-100AE is an amorphous fluoropolymer that exhibits low refractive index, low coefficient of optical dispersion and good lamination properties. The thermoplastic characteristics of CYTOP CTX-100AE, coupled with its transparency, solubility, insulation properties, resistance to chemicals, and oils/water repellency, make it a popular choice for coating electronic materials.

CYTOP CTL-109AE is an amorphous fluoropolymer that exhibits low refractive index, low coefficient of optical dispersion and good lamination properties. The thermoplastic characteristics of CYTOP CTL-109AE, coupled with its transparency, solubility, insulation properties, resistance to chemicals, and oils/water repellency, make it a popular choice for coating electronic materials.

CYTOP CTX-800S is an amorphous fluoropolymer that exhibits low refractive index, low coefficient of optical dispersion and good lamination properties. The thermoplastic characteristics of CYTOP CTX-800S, coupled with its transparency, solubility, insulation properties, resistance to chemicals, and oils/water repellency, make it a popular choice for coating electronic materials.

CYTOP CTX-109AE is an amorphous fluoropolymer that exhibits low refractive index, low coefficient of optical dispersion and good lamination properties. The thermoplastic characteristics of CYTOP CTX-109AE, coupled with its transparency, solubility, insulation properties, resistance to chemicals, and oils/water repellency, make it a popular choice for coating electronic materials.

CYTOP CTL-100AE is an amorphous fluoropolymer that exhibits low refractive index, low coefficient of optical dispersion and good lamination properties. The thermoplastic characteristics of CYTOP CTL-100AE, coupled with its transparency, solubility, insulation properties, resistance to chemicals, and oils/water repellency, make it a popular choice for coating electronic materials.

CYTOP CTL-809M is an amorphous fluoropolymer that exhibits low refractive index, low coefficient of optical dispersion and good lamination properties. The thermoplastic characteristics of CYTOP CTL-809M, coupled with its transparency, solubility, insulation properties, resistance to chemicals, and oils/water repellency, make it a popular choice for coating electronic materials.