Products in Printing & Packaging: Radiation Curable Adhesive

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Deuteron® UV 1240 is a solution formulated with Bis(dodecyl phenyl)-iodonium hexafluoroantimonate dissolved in reactive solvents. The solution includes antimony and utilizes propylene carbonate as a reactive thinner. Notably, it ensures minimal benzene emission and maintains a low odor profile. This solution manifests as a reddish, viscous oil, suitable for various applications within the specified context.

Deuteron® UV 2257 is a solution formulated with Bis-(4-methyl- phenyl)-iodoniumhexafluoro-phosphate dissolved in reactive solvents. This solution utilizes propylene carbonate as a reactive thinner. It boasts no benzene emissions and maintains a low-odor profile, ensuring a more environmentally friendly and user-friendly application.

Deuteron® UV 1242 consists of solutions incorporating bis(dodecyl phenyl)-iodonium hexafluoroantimonate dissolved in reactive solvents. The solution utilizes C12/C14 glycidyl ether as a reactive thinner and contains antimony. Notably, it ensures minimal benzene emissions and maintains a low-odor characteristic. This solution presents itself as a brownish, viscous liquid suitable for various applications within the specified context.

Deuteron® UV 1250 is a photoinitiator with 50.0% active content. In a liquid form, it serves various end uses such as radiation-curable adhesive, flexography ink, varnishes, screen printing ink, and laminating adhesive. The product presents itself as a brownish, viscous liquid, providing versatility in applications requiring photoinitiation properties.

MEDOL-10 has a novel unique structure. It was developed for replacement of THFA, tetrahydrofurfuryl acrylate. MEDOL-10 only has exclamation pictogram on REACH. Its viscosity is low enough for many applications like UV inkjet ink. Some of paper said high polarity pendant group induces high curing speed [1]. Dioxolane structure induces high solvency as same as THFA because both THF and dioxolane are good solvent.

Komo Chemical KH100 resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

Deuteron UV 1240 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1240.The photoinitiator Deuteron UV 1240 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1240 is soluble in these binder systems including the usual solvents and reactive diluents. back

bossin® W-33 has excellent properties in curing, fast, heat resistance, low shrinkage and low irritation.

MPD Industries UVP 0206 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a low odor and good flexible monomer. It is compatible with a wide range of acrylated resins.

Omnicat BL-550 is a liquid photoinitiator blend, based on Omnicat 550 (20%), Propylene Carbonate (25%) and cycloaliphatic epoxy (55%).

MPD Industries UVP 0600 99 is a difunctional Bisphenol A epoxy acrylate. This product is characterized by its light color and high reactivity.It is mainly contributed by the epoxy resin backbone consisting of Bisphenol A and epichlorohydrin reaction product. The two acrylic groups contribute the excellent UV and EB curing properties.

Deuteron UV 2257 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 2257.Deuteron UV 2257 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 2257 is soluble in these binder systems including common solvents and reactive diluents. back

Komo Chemical 384T resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

UVP 0204, Neo-­Pentyl Glycol diacrylate (NPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It has good chemical resistence and high reactivity .It is compatible with a wide range of acrylated resins.

UVP 0303, Di-­Trimethylol propane tetracrylate (DiTMPTA) is a liquid monomer with fast cure response and low volatility during free radical polymerization.It has a low skin irritancy and high cross density upon curing.

Omnicat 320 is a colorless liquid photoinitiator of mixed triarylsulfonium hexafluoroantimonate salts in propylene carbonate. Omnicat 320 has been designed for the cationic curing of inks and coatings based on epoxy, oxetane, and vinyl ether formulations. Omnicat 320 exhibits high cure-speed, low odor, and excellent post cure.

Komo Chemical KH85 resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

MPD Industries UVP 0610 99 is a di functional Bisphenol A epoxy acrylate oligomer gel. This product is characterized by its light color and high reactivity. It is mainly contributed by the epoxy resin backbone consisting of Bisphenol A and epichlorohydrin reaction product. The two acrylic groups contribute the excellent UV and EB curing properties.

UVP 0820 is trifunctional low viscosity acrylated polyester oligomer with low film shrinkage. It has good pigment wetting.

UVP 0205, Di Propylene glycol diacrylate (DPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is an excellent low viscosity economical diluent .It is compatible with a wide range of acrylated resins.

Komo Chemical KA100L resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

Komo Chemical KB100S resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

ADDAPT_x0001_ PolySurF HPm is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate. It has a higher mono-content compared to PolySurF HP

Omnicat 445 is a low odor, benzene free iodonium hexafluorophosphate salt for cationic curing of epoxy, oxetane, and vinyl ether formulations.

MPD Industries UVP 0203 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a high boiling monomer with low vapor pressure.It is compatible with a wide range of acrylated resins.

The photoinitiator Deuteron UV 1242 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1242 is soluble in these binder systems including the usual solvents and reactive diluents.Deuteron UV 1242 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly silicones and epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1242. back

Komo Chemical KH85SL resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

UVP 0301 is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy,

MPD Industries UVP 0225 99 is a aliphatic urethane diacrylate oligomer. Films of UVP 0225 cured by ultraviolet light exhibit good flexibility light color and good adhesion to various substrates. It has excellent resistence to polar solvent and has good chemical resistence.

MPD Industries UVP 0815 99 is difunctional low viscosity acrylated polyester oligomer. It has good pigment wetting properties. It exhibits excellent water balance and good color for development in offset printing application. It is recommended for plastic substrates especially PVC polystyrene and polyolefins.

bossin® W-05 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic. It has an acid value which is higher than B-02.

UVP 0401, Pentaerythritol tetracrylate (PETA) is a liquid monomer with fast cure response and low volatility during free radical polymerization. It has a low skin irritancy and high cross density upon curing.

bossin® W-02 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic.