Products in Primers & Lacquers: Waterborne Coating

Foamaster® MO 2108 is a defoamer based on mineral oil, featuring a blend of low-aromatic mineral oil, hydrophobic silica, and fatty acid derivatives. It is suitable for most water-based paints, lacquers, and printing inks, presenting as an opaque, grayish liquid.

SILRES® BS 310 is a solventless emulsion that can be thinned with water. It consists of polysiloxane modified with a functional silicone resin. This product is specifically designed to be added to aqueous masonry coatings and primers, either during or after their manufacture. When used undiluted, SILRES® BS 310 serves as an additive for aqueous indoor paints or coatings. Its purpose is to enhance the workability of the paint or coating, resulting in improved application properties. This product is highly compatible with indoor paints and has a positive influence on wetting and leveling properties.

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

Inhibisil® 75 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

Inhibisil® 73 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

AFCONA 2050 is a strong defoamer for most solvent-based coatings. AFCONA 2050 offers very strong defoaming and anti-foam performance with good compatibility in many resin systems. It is suitable for solvent-based coatings, printing inks and thermosetting resin systems. The product eliminates foam and blistering, regardless of whether the air bubbles are caused by the substrate.

Lo-Vel® 2010 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

LO-VEL® 8100 flatting agent is a high-efficiency flatting agent that is ideal for use in a variety of coating systems. It is a synthetic amorphous silicon dioxide, wax-treated silica designed for use where a Hegman value of 6 to 6.75 is required. Moreover, its high flatting efficiency, resistance to settling and heat-age stability provide formulation flexibility and expanded process capability.

LO-VEL® 8300 flatting agent is a synthetic amorphous precipitated silica treated with a functionalized wax. It is designed for use in waterborne and solvent-borne coatings, and is suitable for coatings with a dry film thickness of less than 1 mil (< 20 microns).

Lo-Vel® 2023 belongs to PPG's synthetic precipitated silica product line, which reduces the gloss of coatings, varnishes, and other finishes. It offers high flatting efficiency, compatibility with various coating systems, and ease of redispersion. This product line delivers a balance of clarity and flatting for overprint varnish and topcoats. It can be used in solvent- or water-based coatings, high-solids, 100%-solids, and 2K systems, making it a versatile solution for a wide range of applications.

DeMUL 229 is a nonionic emulsifier, improving shear, temperature and electrolyte stability of polymer dispersions. DeMUL 229 can also be used during the premixing phase in the production of waterborne emulsion paints, acting as a process aid and reducing grind time by faster deagglomeration of TiO2 and fillers.

Pangel W is an organically modified sepiolite in powder form used to improve the anti-sagging properties of aqueous systems as well as its anti-sedimentation performance during storage. This thickener is manufactured through organic modification of rheological sepiolite, mainly for aqueous systems. It improves rheological characteristics in the range of shear forces affecting sagging and sedimentation properties while controlling consistency.

DeCAL 4030 is a low-cost universal thermoplastic Styrene/Acrylic copolymer in emulsion form that offers excellent binding power, adhesion, and gloss. DeCAL 4030 is used in a wide range of applications, including interior and exterior water-based paints, lacquers, adhesives, and flexible fillers.

ECOTINT® HC BLUE B4-B are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC BLACK B7-SO are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC COBALT BLUE C1-BO are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC VIOLET A5-V colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC WHITE B6-WO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC RED A3-R colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC YELLOW A1-Y colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Aqueous anionic copolymer emulsion designed for use in the production of specialty paints and protective coatings.

ECOTINT® HC ORANGE A2-O colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC OXIDE RED B3-RO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC BIVA YELLOW C2-YO colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

Polidene® 37-0065 is a premium binder for water-based metal protection primers.  This product is suitable for industrial and automotive OEM, aftermarket, and under-the-hood applications. Polidene® 37-0065 provides superior corrosion protection and water resistance compared to other water-based binder technologies.  This solution can be used in direct-to-metal primers, rust conversion coatings, and other anti-corrosive primer applications.  Manufactured in Kentucky, Polidene® 37-0065 PVDC binder is readily available.

ECOTINT® HC MAGENTA A4-P colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC GREEN B5-G are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC YELLOW B1-Y colorants are very low-VOC pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These binder-free pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC SCARLET A2-R colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC OXIDE YELLOW B2-YO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

ECOTINT® HC OXIDE GREEN A6-GO colorants are binder-free and VOC-free pigment preparations of pourable and pumpable consistency based on copolymers and polymeric dispersants. These pigment pastes are resistant to drying out and suitable to be used either for in-plant tinting or for dosing dispensers. They can be used either by unit of weight or unit of volume.

SYNPRINT AC 1104 is a styrene-modified acrylic copolymer emulsion for aqueous varnishes, flexographic, screen and gravure inks. Formulations containing SYNPRINT AC 1104 can be adapted to the requirements of a variety of different applications. Features and Benefits: High gloss, fast drying Very good heat and water resistance Excellent adhesion Very good abrasion resistance

Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel holdout, and crack resistance.

Polyplate® P is a high brightness, delaminated clay intended for use in latex paints, water flexography inks, water-based adhesives or water-based systems where increased hiding, tinting strength and improved hold out are desirable.

SYNTRAN® DR 7011 is based on our polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based pigment concentrates and coatings. Used as a grinding resin in pigment dispersions, it improves color development of organic pigments and carbon black. Depending on the application and the objective, SYNTRAN® DR 7011 is typically used in concentrations between 10% and 30%. Features and Benefits: Excellent wetting and dispersibility of pigments Highly water sensitive High compatibility and stability in multiple formulation types Zero VOC requirements to formulate coating. Polymeric surfactant technology designed to improve wetting and incorporation of pigments or additives into water-based pigment concentrates and coatings. It improves color development of organic pigments and carbon black.