Products in Healthcare Packaging

Plitek 8114 7.5 mil Polypropylene Film homopolymer polypropylene film extruded on a cast line

Mineral loaded copolymer PP, density 1.4. For SDS, please contact Addiplast Group using the 'Request Document' button.

Supermag 150 is an efficient activator that is highly active, and has high surface area MgO. It is produced under a special processing condition, thereby resulting in controlled particle size distribution. Supermag 150 is a high active magnesium oxide mainly used as an acid scavenger, scorch retarder, or curing agent during the cross-linking of several rubber compounds containing halogens or nitrile groups. Examples include chloroprene rubber and synthetics rubber (FKM, CIIR, BIIR, CPE).

MPI NutriPharma Gelatin Capsules 000# is an economical choice & made from 100% bovine gelatin.

MPI NutriPharma Gelatin Capsules 0# is an economical choice & made from 100% bovine gelatin.

Talc-filled polypropylene compounds have been tailored specifically to meet the requirements of each of the major automobile producers. Grades are available to meet FDA food and drug packaging requirements. These products have excellent mold detail and surface reproduction with fast set-up times. They are also available in an array of colors.

100% PCR PP compound black for aesthetic injected parts. Comply with Reach Regulation 1907/2006 & RoHS Directive 2011/65/EU & its amendment Directive 2015/863/EU. For SDS, please contact Addiplast Group using the 'Request Document' button.

Cariflex™ IR0307 KU Polymer polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It has a high molecular weight as indicated by its Logarithmic Inherent Viscosity (LIV) value of 6.80 dl/g.

Mineral loaded copolymer PP, impact resistant, density 1.9. For SDS, please contact Addiplast Group using the 'Request Document' button.

Talc-filled polypropylene compounds have been tailored specifically to meet the requirements of each of the major automobile producers. Grades are available to meet FDA food and drug packaging requirements. These products have excellent mold detail and surface reproduction with fast set-up times. They are also available in an array of colors.

Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. The emulsion also contains a non-staining antioxidant (typical level of 0.1% mass on solids) and a surfactant.

Talc-filled polypropylene compounds have been tailored specifically to meet the requirements of each of the major automobile producers. Grades are available to meet FDA food and drug packaging requirements. These products have excellent mold detail and surface reproduction with fast set-up times. They are also available in an array of colors.

MPI NutriPharma Gelatin Capsules 0#el is an economical choice & made from 100% bovine gelatin.

Talc-filled polypropylene compounds have been tailored specifically to meet the requirements of each of the major automobile producers. Grades are available to meet FDA food and drug packaging requirements. These products have excellent mold detail and surface reproduction with fast set-up times. They are also available in an array of colors.

Low friction coefficient PBT compound for injection. For SDS, please contact Addiplast Group using the 'Request Document' button.

Talc-filled polypropylene compounds have been tailored specifically to meet the requirements of each of the major automobile producers. Grades are available to meet FDA food and drug packaging requirements. These products have excellent mold detail and surface reproduction with fast set-up times. They are also available in an array of colors.

MPI NutriPharma Pullulan Capsules 0# is a plant-based clean supplement. Pullulan is a polysaccharide naturally obtained from a fermentation process of starch.

Calcium carbonate-filled polypropylene compounds have been tailored specifically to meet the requirements of each of the major automobile producers. Grades are available to meet FDA food and drug packaging requirements. These products have excellent mold detail and surface reproduction with fast set-up times. They are also available in an array of colors.

MD Graphene DURA ABS Blue Pellets are made up of Acrylonitrile-Butadiene-Styrene graphene oxide reinforced, they are anti-bacterial and high temperature resistant. It is the first choice of material for demanding healthcare applications, as well as for medical applications requiring structural stability and high agility.

PA 6 compound density 2.5. For SDS, please contact Addiplast Group using the 'Request Document' button.

MPI NutriPharma Gelatin Capsules 2# is an economical choice & made from 100% bovine gelatin.

Pacur® PETG Copolyester Sheet is extruded from copolyester resin. It is a remarkably clear and tough material, making it ideally suited for use as a blister packaging material. It is both FDA and USDA approved for use in medical device, pharmaceutical, and food packaging applications. It will withstand ethylene oxide, gamma, electron beam, and gas plasma sterilization. Other end uses include general purpose blister packaging, graphic applications, and stationary supplies.

Neoflon PCTFE DF-0075C1 is a white solid film, excelling in water vapor barrier, transparency, chemical resistance, and electrical insulation. With optimal moisture prevention and less than 1% haze for transparency, it resists acids, alkalis, and organics over time. Enhanced wetting behavior through corona treatment. Targeting electrical and electronics and printing and packaging markets, it's ideal for healthcare packaging, wire and cable insulation, and pharmaceutical packaging.

Plenco® 06582 is a rubber modified phenolic molding compound, offering excellent heat resistant properties, along with improved mechanical strength at elevated temperatures. UL recognized under component file E40654. 06582 is available in black.

Plenco® 05118 is a mineral and graphite filled phenolic molding compound. Customers have found this material useful for bearing seals. 05118 provides for a low coefficient of friction, abrasion resistance, minimal water absorption, and excellent dimensional stability under severe exposure. 05118 is available in gray. 05118 is not recommended for electrical insulating applications.

VYNOVA™ S5902 is a low molecular weight, low porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion and calendering of PVC: rigid films for medical, food or consumer goods packaging, compact and foamed sheets, compact and foamed profiles, foam core pipes and fittings, and flooring.

VYNOVA™ S5702 is a low molecular weight, low porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion, calendering and injection blow molding of PVC: rigid films for medical, food or consumer goods packaging, compact and foamed sheets, foam core pipes and pipe fittings, injection moldings, including housing, and bottles.

Pacur® PETG FLEX is engineered for use in 0.003” to 0.009” gage applications and is extruded from PETG copolyester resin. PETG FLEX is an exceptionally tough material making it ideal for label and thermoforming applications.

MPI NutriPharma Vegetable Capsules (HPMC) 00# is made from hypromellose, also known as HPMC. Manufactured with precision and care.

VynoKlear is a high molecular weight vinyl chloride homopolymer produced by a suspension process with no addition of antioxidant. After mixing with appropriate additives, VynoKlear is suitable for extrusion, calendering or injection molding of semirigid and flexible PVC. Its superior porosity, compatibility, and transparency make it ideal for clear medical products, waterproofing membranes, and innovative flexible consumer goods and cables.

MPI NutriPharma Gelatin Capsules 1# is an economical choice & made from 100% bovine gelatin.

Neoflon PCTFE DF-0050C1 is a white solid film, excelling in water vapor barrier, transparency, chemical resistance, and electrical insulation. With optimal moisture prevention and less than 1% haze for transparency, it resists acids, alkalis, and organics over time. Enhanced wetting behavior through corona treatment. Targeting electrical and electronics and printing and packaging markets, it's ideal for healthcare packaging, wire and cable insulation, and pharmaceutical packaging.

Talc-filled polypropylene compounds have been tailored specifically to meet the requirements of each of the major automobile producers. Grades are available to meet FDA food and drug packaging requirements. These products have excellent mold detail and surface reproduction with fast set-up times. They are also available in an array of colors.

Our Calcined Clay - Hyper 200 R is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

Plenco® 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recognized under component file E40654. 06343 is available in natural color.