Products in Other Printing Applications: Acrylics & Acrylates

SYNTHALAT A 1653 is a polyisocyanate-curing acrylic resin. Used in combination with aromatic and aliphatic polyisocyanates for fast-drying 2-pack high-gloss, high-build polyurethane coatings, particularly suitable for coating furniture. It has applications in industrial coatings, metal coatings, furniture coatings, and other printing, packaging, and paper applications.

SYNTHALAT A 1633 is an acrylic resin cross-linked with polyisocyanate. It is used in combination with aromatic and aliphatic polyisocyanates for fast-drying 2-component polyurethane coatings, particularly for coating furniture. It is a fast-drying polymethacrylate that permits the manufacture of very quick-drying 2-component coating systems. These coatings are suitable for industrial furniture coatings and other wood coatings. It has applications in wood flooring, metal coatings, furniture coatings, and other printing applications.

SYNTHALAT A 1613 is an acrylic resin that forms air- and oven-drying two-component lacquers when combined with aromatic and aliphatic polyisocyanates. These lacquers are primarily suitable for wood and plastic coatings and cure quickly at low curing temperatures. It has applications in furniture coatings, wood coatings, and finishes.

Texicryl® 13-814 is a styrene acrylic copolymer aqueous dispersion with excellent flexibility and adhesion properties. It is suitable for use as the main binder in flexo or gravure inks and has good clarity so is suitable for offset overprint. This acrylic dispersion will also be suitable to compound into barrier coatings, as it exhibits very low MVTR and Cobb values.

Texicryl® 13-813 is a modified styrene acrylic copolymer designed for use in off-set overprinting varnishes. It has been formulated to give excellent gloss over print and superior holdout over unprinted areas. It may also be used for certain graphic arts applications to non-absorbent substrates.

Texicryl® 13-824 is a styrene acrylic copolymer emulsion that can be coalesced to form a solvent and plasticiser resistant film. This hard non-film forming emulsion shows excellent adhesion to vinyl and non-absorbent susbstrates. It has been developed for the formulation of plasticiser resistant inks and is suitable for PVC flooring and wallpaper inks.

Texicryl® 17-0330 is a styrene acrylic copolymer emulsion designed for use in high performance adhesives, inks, and coatings where flexibility and/or cold temperature flexibility are desired. It can be utilized in a range of water based adhesives and emulsion paint formulations and can easily be formulated into coatings varying in properties from semi-gloss finish to high pigment volume concentration low-cost paints.

Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.

Texicryl® 13-812 is an alkali swellable emulsion designed for water-based printing ink formulations. It has excellent rub resistance and transfer properties. It is designed for use in flexographic inks for corrugated board. It is also suitable as a pigment grinding medium and let down vehicle.

EBECRYL® 741 is an adhesion-promoting resin with excellent pigment dispersion properties, specifically formulated for radiation-curable screen inks. It is labeled as bisphenol A-free, solvent-free, and VOC-free, contributing to a low carbon footprint (PCF). The applications of EBECRYL® 741 extend across various printing methods, including textile manufacturing, other packaging coatings, digital printing, electrophotography and electrostatic printing, flexography, gravure printing, inkjet printing, letterpress, offset and lithographic printing, screen printing, thermal transfer printing, and other printing applications.

Solid Acrylic Resin PChem® BM260 is a copolymer of methyl methacrylate and butyl methacrylate. It is also good for 2K system coating since it can react with amino and polyisocyanate resins to form crosslinked structures. BM260 is excellent binder for adhesion of aluminum and polystyrene. It is also good for applications of pigmented lacquer. BM260 is soluble in esters, ketones, aromatic, glycol ethers, glycol ether acetates and chlorinated hydrocarbons. BM260 is compatible with alkyd resins.

Anhui Elite Industrial AR-01 is soluble in ester, ketone and aromatics and insoluble in 200# gasoline and alcohol. Or it can be soluble in alcohols, esters, Ketones and aromatics at normal temperature.

TYCON 850 is a Aqueous emulsion of acrylic polymers and acrylic dispersing agents are the salts of polymethacrylic acid and are effective suspending agents for inorganic fillers like titanium dioxide and calcium carbonate. These are universally used in paint formulations where fillers are present in large concentration. They are also used in clay coating formulations and printing inks.

UVP 0401, Pentaerythritol tetracrylate (PETA) is a liquid monomer with fast cure response and low volatility during free radical polymerization. It has a low skin irritancy and high cross density upon curing.

Etna Tec Limited TEC 3065 is a multifunctional acrylate based reactive diluent. It contains Etna-TEC’s (E-TEC) patented cure technology, which allows it to be thermally cured in the presence of oxygen. TEC 3065 is a low viscosity, 100% NVM liquid, and thus, contains no Volatile Organic Compounds (VOC).

PLT26 is used as Polypropylene.

Briture Solid Acrylic Resin BA-17 is a thermoplastic acrylic resin and It can be dissolved in ester kind, ketone kind solvent, can not be dissolved in the alcohol kind and 200# gasoline solvent.

Etna Tec Limited TEC 3570 is a multifunctional acrylate based reactive resin system. It contains Etna-TEC’s (E-TEC) patented cure technology, which allows it to be thermally cured in the presence of oxygen. TEC 3570 is a low viscosity, 100% NVM liquid, and thus, contains no Volatile Organic Compounds (VOC).

Epoxy Acrylate Oligomers

PLT 55 is recommended for polystyrene, ABS, SAN, polycarbonate, acrylic glass (PMMA), rigid PVC, some types of soft PVC, wood, paper and cardboard, and by adding hardener also varnished surfaces, thinly anodized aluminum, some thermosetting plastics.

RESICRYL 361P is a pure acrylic binder and acrylic dispersing agents are the salts of polymethacrylic acid and are effective suspending agents for inorganic fillers like titanium dioxide and calcium carbonate. These are universally used in paint formulations where fillers are present in large concentration. They are also used in clay coating formulations and printing inks.

CE CRYL 10000 is a Low Viscosity 100% Epoxy Acrylate Oligomer.

Briture Solid Acrylic Resin BA-66 is a thermoplastic acrylic resin and It can be dissolved in ester kind, ketone kind solvent, can not be dissolved in the alcohol kind and 200# gasoline solvent.

Kao Chimigraf Quadrimaster Quadrimaster is a line of aqueous acrylic-based inks designed specifically for flexographic color printing and pre-printing on coated and semi-coated papers.

Silok® 4075 is a silicone free defoamer, with good defoaming and foam suppression ability, and no influence of recoating.

Epoxy Acrylate Oligomers

EDAPLAN LA 403 is suitable for all aqueous coating and printing ink systems. The polymer is compatible with all common resin systems.

Briture Water Base Acrylic Resin BAW-563 is a general purpose mid-range molecular weight Acrylic Resin.

THYON SR630 is a high molecular weight alkali soluble solid resin designed to producegood rheology organic and inorganic pigments dispersions.

Etna Tec Limited TEC 3350 is a low viscosity 100% solids multi-functional acrylate liquid.

CE CRYL 800T is a 80% Epoxy Acrylate Oligomer with 20% monomer (TPGDA) .

RESICRONAL 2950 is a styrene acrylic copolymer emulsion and acrylic dispersing agents are the salts of polymethacrylic acid and are effective suspending agents for inorganic fillers like titanium dioxide and calcium carbonate. These are universally used in paint formulations where fillers are present in large concentration. They are also used in clay coating formulations and printing inks.

PLT 65 UV is to be used printing on rigid PVC, abs, san, copolymers, polyamide, polycarbonate, mat polystyrene, glossy polystyrene, soft PVC, acrilic glass (casted PMMA), duroplast, glass, ceramics, coated surfaces, PET-A, treated PE, no treated PP, no treated polystyrene.

Polyisocyanate-curing Acrylic resin

RESICRYL TH 460 is a aqueous emulsion of acrylic polymers and these are universally used in paint formulations where fillers are present in large concentration. They are also used in clay coating formulations and printing inks and Acrylic dispersing agents are the salts of polymethacrylic acid and are effective suspending agents for inorganic fillers like titanium dioxide and calcium carbonate. These are universally used in paint formulations where fillers are present in large concentration. They are also used in clay coating formulations and printing inks.

ACROTEK® APR-0304 has Excellent Eco-friendly, Flexibility, Adhesion and Abrasion/Laundering Resistance.