Products in CASE Ingredients: Adhesion Promoter

TYTAN™ TIPT is a highly reactive primary titanate that readily hydrolyzes upon contact with moisture. It is primarily used as a catalyst for esterification, transesterification, and olefin polymerization, and selectively as an adhesion-promoting and cross-linking agent for hydroxylic compounds or heat- and corrosion-resistant coatings. TYTAN™ TIPT is particularly suitable for use in glass and glass fiber manufacturing and can only be added to solvent-based products.

TYTAN™ AP20 is primarily designed to strongly increase adhesion of solvent based inks to a variety of plastics used for food packaging or other purposes, but also pigment distribution and heat sealing resistance are improved allowing perfect hiding power and appearance of printing on otherwise problematic substrates.

TYTAN™ ET is a titanium alkoxide. TYTAN™ ET is used in a variety of industrial applications, e.g., as an esterification and transesterification catalyst, as an olefin polymerization catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds, and as a component of heat and corrosion resistant paints.

Access Rudolf Organosilane A302-1 is a versatile, clear to light yellow liquid silane coupling agent offered by Access Rudolf. It is primarily used as an adhesion promoter and surface modifier in a variety of industrial applications, including coatings, adhesives, and composites. This product is designed to enhance the performance of organic and inorganic materials by providing a strong chemical bond between them. Access Rudolf Organosilane A302-1 is also AICS, EINECS, ENCS, IECSC, KECL, DSL, PICCS, and TSCA registered, ensuring its compliance with various international regulations.

TYTAN™ TNBZ is a very reactive primary zirconate that will hydrolyze immediately in contact with moisture. TYTAN™ TNBZ is mainly used as a catalyst for esterification, trans-esterification, and olefin polymerization (Ziegler-Natta). TYTAN™ TNBZ is very suitable as an adhesion-promoting and cross-linking agent for hydroxylic compounds or heat and corrosion-resistant coatings.

TYTAN™ AP100 is a titanium phosphate complex in which the alkoxy groups can react with resins to promote adhesion and/or cross-linking while the chelating agents stabilize the molecule. Tytan AP100 is mainly designed to strongly increase the adhesion of solvent-based inks to a variety of plastics used for food packaging or other purposes.

TYTAN™ TNPZ is a highly reactive primary zirconate that hydrolyzes immediately upon contact with moisture. It is mainly used as a catalyst for esterification, trans-esterification, and olefin polymerization (Ziegler-Natta). TYTAN™ TNPZ is also an excellent adhesion promoter and cross-linking agent for hydroxylic compounds or heat and corrosion-resistant coatings. Furthermore, it is an important raw material for synthesizing various organozirconium compounds.

TYTAN™ TAA is a titanium chelate whose alkoxy groups can react with resins to enhance adhesion and/or crosslinking, while the chelating agents stabilize the molecule. TYTAN™ TAA has an exceptional balance between reactivity and crosslinking/adhesion-improvement properties, which makes it highly suitable for significantly enhancing the performance properties of industrial coatings on challenging modern polymeric substrates, glass, and some metals.

TYTAN™ TNBT is a highly reactive primary titanate that hydrolyzes immediately upon contact with moisture. It is primarily used as a catalyst for esterification, transesterification, and olefin polymerization, and is also highly suitable as an adhesion-promoting and cross-linking agent for hydroxylic compounds or heat- and corrosion-resistant coatings. TYTAN™ TNBT can also be used as a moisture scavenger to extend the shelf life of moisture-sensitive, high-viscosity products. It can only be added to solvent-based products.

TYTAN™ BIP15 is a mixture of tetra isopropyl titanate and tetra n-butyl titanate at an 85:15 ratio. TYTAN™ BIP15 is used in a variety of industrial applications, e.g., as an esterification and transesterification catalyst, as an olefin polymerization catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds, and as a component of heat and corrosion resistant paints.

Access Rudolf Organosilane AE 302 is a high-performance coupling agent used in various industrial applications. It enhances the adhesion between substrates, improves mechanical properties, and increases thermal stability. AE 302 is suitable for use in coatings, composites, and other applications where superior performance is required.

Access Rudolf Organosilane AE 312 is a highly effective coupling agent used in various applications, including composites, coatings, and adhesives. It enhances the adhesion between substrates and improves the mechanical properties of the final product. AE 312 is especially useful for glass fiber reinforced composites and is also compatible with various solvents and resins.

TYTAN™ AQ33 is titanium ammonium lactate that is used as an esterification and transesterification catalyst for the manufacture of unsaturated polyester, polyester, PET, PTT, and PBT when water content is higher. TYTAN™ AQ33 can also be used as an adhesion promoter or cross-linking agent for water-based coatings on various surfaces.

Access Rudolf Organosilane A302 is an important coupling agent for glass fibers and mineral-filled thermoplastics. It can also be used as a primer for metals and inorganic substrates. A302 can improve the adhesion of organic resins to inorganic substrates such as glass, metals, and mineral fillers. It can also enhance the mechanical properties and durability of the final product. A302 is easy to handle and can be diluted in a variety of solvents.

TYTAN™ S6 is a titanium ethylacetoacetate commonly used as an important additive in moisture-curing room temperature vulcanizable (RTV) silicone sealant, as a catalyst for silane and silicone cross-linking, and as a moisture scavenger for sealant. TYTAN™ S6 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.

TYTAN™ EHT is a titanium alkoxide. TYTAN™ EHT is used in a variety of industrial applications, e.g., as an esterification and transesterification catalyst, as an olefin polymerization catalyst, as an adhesion promoter, as a crosslinking agent for hydroxylic compounds, and as a component of heat and corrosion resistant paints.

ACCESS® Inhibitor Inhibitor 550 is a specialized mixture of silanes designed to improve the corrosion resistance of coatings on metal surfaces. This proprietary formula enhances the durability and lifespan of metal coatings by providing an extra layer of protection against corrosion. Additionally, it can act as a coupling agent for various applications such as unsaturated polyester, fiberglass composites, polysulfide, and polyurethane caulks and sealants, and glass roving size-binders.

TYTAN™TM AP910 is an ethyl citrate zirconium that can be formulated as an adhesion promoter for printing inks, a crosslinker for paints, as well as a catalyst for esterification. Due to its proprietary chelated structure, TYTAN™ AP910 shows a delayed reaction at ambient temperature and thus facilitates the storage stability of inks. Compared with organo-titanate adhesion promoters, it shows good compatibility with PVB, CAB, and CAP inks and provides minimal discoloration during the sterilizing process in the printing of milk pouches.

ACCESS® WETGRIP XL is a unique additive for enhancing the wet and dry grip of rubber compounds, especially for applications that require strong adhesion even in wet conditions. This product can be used for tire treads, industrial hoses, conveyor belts, and other rubber goods. ACCESS® WETGRIP XL is an aqueous dispersion of functionalized polymeric microspheres that are designed to interact with the rubber matrix to provide excellent grip performance. Additionally, it can improve rolling resistance, wear resistance, and processability of rubber compounds.

Access Rudolf Organosilane AE301-T1 is a colorless or light yellowish liquid that can improve the adhesion and compatibility of various substrates. It can be used in the production of resins, coatings, adhesives, and composites to enhance their mechanical properties and durability.

Trazidin VN is composed of polyfunctional aziridine and appears as a clear, amber liquid. When utilized as a cross-linker, it significantly enhances the final properties of various adhesives, coatings, and printing applications. Notably, Trazidin VN is miscible in water and many common organic solvents, enabling its use in both aqueous and solvent-based systems.

Trapylen® T 8380 is typically applied via spray coating or, preferably, using a mill-point roller. This ready-to-use primer is based on a chemically modified, low-chlorinated polypropylene. It boasts a relatively high film softening temperature, along with excellent film flexibility and resistance against thermal decomposition.

Trapylen® 6700 W is an advanced adhesion promoter and coupling agent in the chlorinated polyolefins (CPO) chemical family, meticulously formulated for waterborne coating applications. This product stands out for its commitment to environmental responsibility, proudly bearing the labeling claim of being APEO-free. Designed to enhance adhesion and compatibility in waterborne formulations, Trapylen® 6700 W signifies a perfect synergy between superior performance and eco-friendly practices. Industries seeking an effective, APEO-free solution for optimal adhesion promotion in waterborne coatings need look no further than Trapylen® 6700 W.

Trapylen® 6600 W is a cutting-edge adhesion promoter and coupling agent belonging to the chlorinated polyolefins (CPO) chemical family, is meticulously crafted for waterborne coating applications. Notably, this product stands out for being APEO-free, aligning with the highest environmental standards. Tailored to enhance adhesion and compatibility in waterborne formulations, Trapylen® 6600 W exemplifies a commitment to both performance and eco-friendly practices, making it the ideal choice for industries seeking effective adhesion promotion without compromising on environmental responsibility.

Trapylen® 950 S is a newly developed chlorine-free polyolefin that exhibits exceptional adhesion properties specifically on polyolefin substrates such as polypropylene, PP/EPDM thermoplastic rubbers, and, to a certain extent, polyethylene. Notably, it demonstrates favorable solubility in non-aromatic solvents. This grade finds application as an adhesion promoter in printing inks, adhesives, and paints, serving both as an adhesion booster and a straight primer.

Trapylen® 130 X is a chemically modified low-chlorinated polypropylene celebrated for its remarkable affinity to polyolefinic plastics, including PP, PP/EPDM-blends, and, with certain limitations in adhesion strength, PE. Versatile in its applications, it serves as either a straight primer or an adhesion promoter for base coats and pigmented primers. Its primary use extends to paintings and coatings for molded parts and sealing profiles in the automotive industry, encompassing applications such as bumpers, side panels, and door seals. Additionally, Trapylen® finds utility in adhesives and flocking agents for door seals. Moreover, it is employed in industrial settings where PP-based plastics undergo chemical pretreatment.

Trapylen® 920 S is newly developed chlorine-free polyolefin with excellent adhesion properties on polyolefinic substrates such as polypropylene, PP/EPDM thermoplastic rubbers and - with limitations to adhesion strength as well to polyethylene. Further advantage of this grade is its good solubility in non-aromatic solvents. TRAPYLEN® 920 S is used as adhesion promoter for in printing inks, adhesives and paints, or as a straight primer.

ProFlex 8 is a versatile mixture of ortho and para-n-ethyl toluenesulfonamide, renowned for its broad compatibility as a plasticizer. Beyond its plasticizing capabilities, this product excels at promoting adhesion and exhibits excellent thermal stability. Its high polarity makes it particularly effective in readily plasticizing a range of materials, including nylon, various polyamides, shellac, cellulose acetate, and protein-based materials. Notably, ProFlex 8 stands out for its ability to create compounds resistant to oils, solvents, and greases, further enhancing its utility in diverse applications.

Trapylen® 777 is a modified, low chlorinated polypropylene with reactive groups in order to crosslink e.g. with Desmodur N 3390, Z 4370 or other polyisocyanates. The polymer is dissolved in a mixture of toluene, cyclohexane and butylacetate (ratio: 70+20+10). Main merit is its good adhesion strength on polyolefinic plastics. Adhesion and film flexibility of TRAPYLEN® 777 can be increased when adding maleic modified CPO's like TRAPYLEN® 130 X.

Trapylen® 137 T is a chemically modified low-chlorinated polypropylene renowned for its exceptional affinity to polyolefinic plastics like PP, PP/EPDM blends, and, to a certain extent, PE. It serves a dual purpose as both a straight primer and an adhesion promoter, proving valuable for base coats and pigmented primers. Its primary application lies in the realm of paintings and coatings for molded components and sealing profiles within the automotive sector, spanning areas like bumpers, side panels, and door seals. Additionally, Trapylen® finds utility in adhesives and flocking agents for door seals, as well as in various industrial applications where chemically pretreated PP-based plastics are employed.

Trapylen® 6765 W is an adhesion promoter based on chemically modified, low- chlorinated polypropylene dissolved in water. The dispersion is free of APEO. TRAPYLEN® 6765 W has outstanding affinity to polyole-finic substrates. It is especially developed to improve surface tension of treated and untreated films, foils, foams and even molded parts of PP, PE, polyolefinic blends, a.o. The increase of wetting properties permits the bonding, printing, flocking and painting of such substrates. TRAPYLEN® 6765 W can be occassionally used as adhesion promoter incorporated in adhesives, inks and paints in case of sufficient compatibility.

Trapylen® 187 S is a chlorinated polypropylene characterized by a higher chlorine content compared to other Trapylen® grades. This feature results in good compatibility with other resins and polymers, coupled with excellent pigment wetting. The cured film exhibits high gloss and very good chemical and aging resistance. The primary advantage of Trapylen® 187 S lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited and may be compensated for by using it with low-chlorinated Trapylen® grades.

Trapylen® 138 S is a chemically modified low-chlorinated polypropylene renowned for its exceptional affinity to polyolefinic plastics like PP, PP/EPDM blends, and, to a certain extent, PE. It serves a dual purpose as both a straight primer and an adhesion promoter, proving valuable for base coats and pigmented primers. Its primary application lies in the realm of paintings and coatings for molded components and sealing profiles within the automotive sector, spanning areas like bumpers, side panels, and door seals. Additionally, Trapylen® finds utility in adhesives and flocking agents for door seals, as well as in various industrial applications where chemically pretreated PP-based plastics are employed.

Trapylen® 139 S is a chemically modified low-chlorinated polypropylene renowned for its exceptional affinity to polyolefinic plastics like PP, PP/EPDM blends, and, to a certain extent, PE. It serves a dual purpose as both a straight primer and an adhesion promoter, proving valuable for base coats and pigmented primers. Its primary application lies in the realm of paintings and coatings for molded components and sealing profiles within the automotive sector, spanning areas like bumpers, side panels, and door seals. Additionally, Trapylen® finds utility in adhesives and flocking agents for door seals, as well as in various industrial applications where chemically pretreated PP-based plastics are employed.

Trapylen® 137 S is a chemically modified low-chlorinated polypropylene renowned for its exceptional affinity to polyolefinic plastics like PP, PP/EPDM blends, and, to a certain extent, PE. It serves a dual purpose as both a straight primer and an adhesion promoter, proving valuable for base coats and pigmented primers. Its primary application lies in the realm of paintings and coatings for molded components and sealing profiles within the automotive sector, spanning areas like bumpers, side panels, and door seals. Additionally, Trapylen® finds utility in adhesives and flocking agents for door seals, as well as in various industrial applications where chemically pretreated PP-based plastics are employed.

Trapylen® 5800 UV is a chlorinated polypropylene, dissolved in reactive, UVcurable monomer hexandiol diacrylate (HDDA). It has outstanding affinity to polyolefinic plastics such as PP, PP/EPDM thermoplastic rubbers and reasonable adhesion to PE. It was developed as an adhesion additive for UV-curing printing inks.