Products in Composite Materials: Continuous Lamination

EcoPaXX® Q20HG60 is a black, unidirectional tape that offers 60% continuous glass fiber reinforcement and is heat stabilized. It can be processed using lamination, thermoforming, and winding techniques. Similar to EcoPaXX® Q20HC60, this product is also bio-based and can be measured using 14C. It is used in applications such as coolant expansion tanks, wheel housing parts, flooring, and door panels.

Akulon® K20HG60 is a polyamide 6 (PA 6) that serves as a resin, binder, and matrix material with the additional benefit of a low carbon footprint. Its features include cost-effectiveness, design flexibility, good strength, heat stabilization, high-temperature resistance, and light weight, making it suitable for various markets including automotive, electrical, electronics, and industrial applications.

Crystic® Polyester Resin PDME 074 is an acrylic modified orthophthalic unsaturated polyester resin developed specifically for the manufacturing of maximum clarity roofing sheets by continuous sheeting process. It is ultra violet stabilized by the addition of special anti UV additives. The resin also contains acrylic monomers to reduce long term yellowing of the laminates.

espol™ 26.00 is a non-accelerated orthophthalic polyester resin that rapidly wets out reinforcements. It is formulated as a pultrusion grade, providing fast line speeds for products requiring high temperature exposure and a good finish. It can be used with all types of glass fibers, such as chopped strand mat, woven roving, and multi-axials. Typical applications include channels, angles, ladders, and special panels for appliances.

ISO112 is an isophthalic unsaturated polyester resin type 1140 according to DIN 16946-2. ISO112 is particular indicated in outdoor application.

USP-EAGLE (RS18-65) is Unsaturated Polyester resin with high clarity, very good transparency as the refractive index of cured resin matches that of E-glass fiberit is used in the manufacturing of roofing sheets by continuous lamination.

DISTITRON® 100 CV2,5 - Unsaturated polyester resin in styrene,DCPD. It is used to produce flat sheets,laminates through hand lay up and spray up method.

DISTITRON® 515 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Schmelzer Industries PEARLVEIL 20 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

Eager Polymers EP4117 is a room temperature curing, rigid, translucent, polyester resin for use with fiberglass fabric. It is an air-inhibited resin so additional layers can be applied without sanding between layers. Consequently, EP4117 is often called bonding resin or laminating resin. Successful applications include boat-building, auto body construction, mother mold production and other reinforced plastic parts by hand lay-up or chopper gun.

Schmelzer Industries PEARLVEIL 3 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

Norsodyne® R 55082 - standard isophthalic-neopentylglycol resin for hot curing. Main applications areas are building and construction, industrial sector etc.

ENYDYNE® R 61500 T - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks.

DISTITRON® 510 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flat sheets,laminates,transparent and corrugated sheets through continuous laminating method.

Polydyne® 6010 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

NORSODYNE® S 15080 L - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Polydyne® 6028 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

Rhino Linings USA, Inc. 1310T Resin is a Thixotropic (non-draining) Epoxy for Laminating and Tooling. Thixotropic version of 1310L-6 used for vertical laminates, tooling or where a nondraining epoxy system is desired.

Letoxit® LFX 162 is applied for production of laminated segments reinforced with glass, carbon or kevlar fibers. Used in - parts of airplanes, sailplanes, sport boats, carriage body etc.

Schmelzer Industries FLEXIVEIL 20 mil is a non-woven, continuous strand glass fiber surfacing veil for compound curved composite parts. Process applications include Compression Molding, Continuous Lamination, ,Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG), Other unique applications.

Superior Huntingdon Composites M8636X1 is this is a continuous filament reinforcing mat designed for flat-sheet epoxy laminate production. It has been treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity.

LAM-125 / LAM-224 has Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar® and carbon fiber.

Schmelzer Industries PEARLVEIL 15 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

Versitex® VX4 is a cost-effective thermoplastic liner comprised of polypropylene resin reinforced with continuous bi-directional glass fibers to create high impact resistant panels. It resists rot, corrosion, and mildew and is not affected by cleaning related chemicals. Versitex VX Series wall panels provide significant energy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. The bi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitex is easily repaired by applying low heat.

Schmelzer Industries FLEXIVEIL 10 mil is a non-woven, continuous strand glass fiber surfacing veil for compound curved composite parts. Process applications include Compression Molding, Continuous Lamination, ,Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG), Other unique applications.

CWP200 is High performance fiber woven fabric. It is a kind of fabric woven from various high-performance fibers with surface treatment through different weaving processes such as plain weaving and twill weaving. Products are widely used in aerospace, military industry and national defense, infrastructure engineering, wind blades, sports and leisure and other fields.

Schmelzer Industries PEARLVEIL 40 mil is a non-woven, continuous strand glass fiber surfacing veil for relatively flat composite parts. Process applications include Pre-form, Compression Molding, Continuous Lamination, Electrical Flat Sheet, RTM / Vacuum Infusion, Filament Winding, Glass Reinforced Gypsum (GFRG).

Epoxy resin in the form of foil is designed for patent Letoxit Foil Technology (LF Technology). LF Technology is a dry lamination technique, which is suitable especially for production of laminate structures with exactly defined reinforcement and resin content. If it is necessary to increase the amount of resin in a certain place, it is also possible to combine epoxy resin Letoxit Foil with prepregs. Letoxit® LFX 035 can be applied for all types of reinforcement. Various types of glass, carbon or Kevlar fabrics or their combinations are mostly used. Unidirectionally oriented reinforcements or 3D fabrics can be used, too. LFX 035 is suitable especially for production of sandwich structures and honeycomb constructions. The produced laminate has very good mechanical properties under stress in temperature range from -75°C to +110°C. Therefore it is used for manufacturing of aircraft parts and transport vehicles.

Rhino Linings USA, Inc. 1301 Resin is a Standard Undiluted Epoxy Resin. The standard press mold epoxy system for composite laminates and parts. All listed hardeners cure very quickly at standard process temperatures 160°F – 210°F.

Norsodyne® W-154KI - good transparency, UV stabilized, preaccelerated. Main applications areas are building and construction, home and domestic applications etc.

NORSODYNE® R 26391 T - Unsaturated polyester resin in styrene,Ortophthalic-Neopentylic. It is used to produce relining,cipp,pipes and tanks.

Versitex® VR2 is a cost-effective thermoplastic composite backed by a thin sheet of fabric to helppromote adhesion of injected or poured foam systems. These high impact resistant panels are comprisedof polypropylene resin reinforced with continuous bi-directional glass fibers. Versitex resists rot, corrosion,mildew, and is not affected by cleaning-related chemicals. Versitex VR Series panels provide significantenergy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. Thebi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitexis easily repaired by applying low heat.

NORSODYNE® S 81302 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating,hand lay up and spray up method.

DISTITRON® 518 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

DISTITRON® 454 AV7 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Rhino Linings USA, Inc. 1337 Resin is a High Temperature Epoxy Novolac Tooling Resin. High temperature Novolac laminating and tooling epoxy. 350°F HDT after post cure.