Products in Sunscreen Agents

COSM’OIL® KD-S** is Organic Virgin Pongamia Glabra Seed oil. It is obtained from the crushing and pressing of the seeds of Pongamia Glabra, followed by a Deodorization.

T-80AS is a fine white powder with a characteristic odor. It has a non-nano particle and is compatible with BMDBM(Avo benzone). T-80AS has a special silica sol coating and alkyl silane. It is ideal for use as a UV Filter.

PromaShine ® Z801CUD offers excellent transparency and dispersibility. Through the siliconization process, zinc oxide is combined with aluminum distearate and dimethicone, further enhancing its dispersibility and transparency. This allows for smooth and natural application of cosmetic products onto the skin. Additionally, this filter possesses safety and non-irritating properties, ensuring that the use of cosmetic products does not cause discomfort or allergic reactions. Its superior light stability also provides additional protection.

Extract derived from partially fermented then dried black tea leaves. It’s high flavonoid content makes it suitable for use in skin, sun and hair care products as well as soaps and acne products.

Highly purified hydrophobic Zinc Oxide Quantum Dots which is a luminescent material, metal oxide Semiconductor coated with short-chain organic ligands acts as a fluorescent agent. Monodispersed, narrow size distribution, solution-stable, bright yellow luminescence upon excitation with W.

SUNSIL-Tin50ULTRA is a 1.5um sized silica encapsulating TiO2 that has as much UV protection performance as nano-sized TiO2, and also you can avoid white cast even it’s non-nano TiO2 in your sun care formula.

Sunsafe ® ILS is a humectant, solvent and lubricant with an amino acid structure. It has good solubility, can dissolve difficult ingredients (such as UV filters and other active ingredients), good compatibility with other oils and fats, Low viscosity, good tactility and extensibility, good affinity with pigments Suitable for a wide range of oils, colour cosmetics,sunscreens, make -up removers and other products.

Sunsafe ® T101AI is a hydrophilic TiO2 treated with aluminum hydroxide and Isostearic acid. It can be dispersed stably in oil and has good transparency and UV protection.

Salisol CRY has excellent dissolving properties for solid sunscreens. It is a preferred UV filter for water resistant formulations. The extended conjugation of the acrylate portion of the molecule absorbs UVB and short-wave UVA rays with wavelengths from 280 to 320 nm, protecting the skin from damage. Salisol CRY is a Category 1 sunscreen in the United States for OTC use.

SUNSIL-Tin50ULTRA AS is a Alkylsailane surface treated 1.5um sized silica encapsulating TiO2 that has as much UV protection performance as nano-sized TiO2, and also you can avoid white cast even it’s non-nano TiO2 in your sun care formula.

Sunsafe® Z201C is an ultra-fine zinc oxide prepared using a unique crystal growth-guided technology. It has undergone a special inorganic surface treatment that imparts excellent dispersion and transparency to the powder, enhancing its physical and chemical stability. It is safe and non-irritating, providing effective protection across the full spectrum of UVA and UVB rays.

Cosmasorb 400 is a cosmetic grade liquid ultraviolet broad spectrum light absorber.

Silasoma™ ME(N) is an aqueous dispersion of encapsulated UV absorbers (60% as active component). This product is an average diameter of 2 micrometers microcapsule using silk protein as a wall material. And encapsulation eminently reduces penetration of UV absorbers into skin. It is suitable for sunscreen for sensitive skin or baby care. Encapsulating the UV absorbers provides a soft and light after-feel and allows for surfactant-free and safer sun protection formulations. Silasoma™ ME(N) microcapsules contain Ethylhexylmethoxycinnamate. It is developed and manufactured in Japan by SEIWA KASEI.

Zano® M is uncoated Zinc Oxide providing highest levels of UVA protection. It provides a critical wavelength of 385nm and ~1.5 SPF units/w%. It is COSMOS and Ecocert certified. The Zano® range consists of three base products that each have a different tailored particle size distribution to deliver distinct UVA and transparency levels. Products are available as coated and uncoated powders and as Xperse® dispersions, some in combination with TiO2. Zano® & Xperse® are products from EverCare.

Sunsafe® MBC is a highly effective UVB absorber with a specific extinction (E 1% / 1cm) of min. 930 at around 299nm in Methanol and has additional absorption in the short-wave UVA spectrum. A small dosage would improve SPF when used with other UV filters. Effective photostabilizer of Sunsafe® ABZ.

Hybird-EHT is a PMMA bead encapsulating of Ethyl Hexyl Triazone. Hybrid-EHT is compatible with aqueous system and it gives light texture and efficient UVA protection to the formulation. This product is ideal for water-based sun care formulation.

SUNSIL-Tin50AS is a non nano tio2 product encapsulated in silica and is treated with triethoxycaprysilane. This product is widely used in premium suncare for boosting SPF.

Plerasan® Veil 500 supports skin daily protection as Antipollution agent, Blue light protector and Anti-age promoter

Salisol 3 is a widely used as an organic UV-A filter in sunscreens. It can also offer protection of colorants against fading and help stabilize fragrances and active ingredients against oxidation. Polar oils like C12‐15 Alkyl Benzoate, PEG‐7 Glyceryl Cocoate or Caprylic Capric Triglyceride are particularly suitable.

Sandream™ Butyl Methoxydibenzoylmethane (BMBM) Avobenzone is a white crystalline powder that functions as a UV absorber. When applied to the skin, this product absorbs UV rays. It can also be used to protect cosmetics and personal care products from deterioration. This product can be used in the formulation of sun protection products, as well as bath, skin, cleansing, hair, nail, and fragrance products.

Sunsafe ® T101HADS1 is a Hydrophobic UVA+UVB broad-spectrum ultraviolet filter with excellent dispersion properties. It efficiently blocks ultraviolet rays, significantly enhancing the PA and SPF values. Additionally, it exhibits outstanding transparency and is non-irritating to the skin.

Buriti pulp oil rich in carotenoids and tocopherol, potent natural antioxidants, which acts in theprotection of DNA against the aggressions caused by UV rays, as well as SPF booster. Food Grade. Cosmos certified ingredient.

Xperse® 201 is a dispersion of Zano® 10 Plus Zinc Oxide in CCT. The Zano® 10 Plus in the product is triethoxycaprylyl silane coated Zinc Oxide providing balanced UVB/UVA protection and transparency. It provides a critical wavelength of 373nm and ~1.6 SPF units/w%. The Zano® range consists of three base products that each have a different tailored particle size distribution to deliver distinct UVA and transparency levels. Products are available as coated and uncoated powders and as Xperse® dispersions, some in combination with TiO2. Zano® & Xperse® are products from EverCare.

Apalight is a natural ingredient made of functionalized hydroxyapatite particles. Bio-functional and skin-friendly mineral for sunscreen application. Apalight is a biomimetic mineral with performances comparable to Titanium dioxide, without blue-white appearance, no nanomaterial nature; it boasts a unique safety profile and its mineral profile is compatible to the sea eco-system, with a relevant profile of environmental sustainability.

Salisol BMZ is a broad spectrum filter from both the UVA and UVB rays. Salisol BMZ gives synergistic effect with other UV absorbers. It also provides photo stability and long lasting protection against UVA radiation.

SFT85-AB is a non-nano TiO2 dispersion that offers both UVA and UVB protection. It has a critical wavelength of > 370nm and has no alumina.

Sunsafe® T301CS1 is a hydrophilic TiO2 treated with silica only. Uniformly dispersed nano-particle size, natural and beautiful blue phase, excellent dispersion and suspension, stable physicochemical properties.Sunsafe® T301CS1 performs more transparently in the formulation than Sunsafe

Silasoma™ MEA is an aqueous dispersion of encapsulated UV absorbers (60% as active component). This product is an average diameter of 2 micrometers microcapsule using silk protein as a wall material. And encapsulation eminently reduces penetration of UV absorbers into skin. It is suitable for sunscreen for sensitive skin or baby care. Encapsulating the UV absorbers provides a soft and light after-feel and allows for surfactant-free and safer sun protection formulations. Silasoma™ MEA micropasules contain Ethylhexylmethoxycinnamate and Butyl Methoxydibenzoylmethane. There are also products with different preservatives and chelating agents. It is developed and manufactured in Japan by SEIWA KASEI.

SUNCLEAR-Z65C5 is a Coco-Caprylate/Caprate based Zinc dispersion. It can be usefully used for both W/O and O/W. Also, This dispersion helps formulators to develop Clean beauty (Like PEG free) and broad spectrum sunscreen by using ZnO.

Sunsafe® TDSA is a water soluble, efficient UVA filter used in sunscreen cosmetics, and it is often combined with other UV filters.

The natural UV protection / natural UV-absorbers. Can be used as SPF booster 100% biodegradable Non greasy touch in combination with coconut alkanes Plant-derived, vegetal based, Non-GMO Non-hydrogenated Non Phototoxic Non Photosensitive No cumulative dermic irritation potential No sensitization potential Ecocert certified Has natural sun Protection factor

Sunsafe® T101CAD is a nanoscale titanium dioxide (nm-TiO2) treated with a layered mesh architecture coating on the surface of titanium dioxide particles using Alumina, Silica and Dimethicone. Physical sunscreen is like an umbrella applied to the skin. It stays on the skin's surface, forming a physical barrier between your skin and ultraviolet rays, providing sun protection. It lasts longer than chemical sunscreens and does not penetrate the skin. It is certified as safe by the U.S. FDA, making it more suitable for sensitive skin. This treatment effectively blocks ultraviolet rays. Sunsafe® T101CAD exhibits excellent dispersibility and is non-irritating to the skin.

Silasoma™ MEA(L) is an aqueous dispersion of encapsulated UV absorbers (60% as active component). This product is an average diameter of 2 micrometers microcapsule using silk protein as a wall material. And encapsulation eminently reduces penetration of UV absorbers into skin. It is suitable for sunscreen for sensitive skin or baby care. Encapsulating the UV absorbers provides a soft and light after-feel and allows for surfactant-free and safer sun protection formulations. Silasoma™ MEA(L) microcapsules contain Ethylhexylmethoxycinnamate (lower odor) and Butyl Methoxydibenzoylmethane. There are also products with different preservatives and chelating agents. It is developed and manufactured in Japan by SEIWA KASEI.

Silasoma™ EP(S) is an aqueous dispersion of encapsulated UV absorbers (60% as active component). This product is an average diameter of 2 micrometers microcapsule using silk protein as a wall material. And encapsulation eminently reduces penetration of UV absorbers into skin. It is suitable for sunscreen for sensitive skin or baby care. Encapsulating the UV absorbers provides a soft and light after-feel and allows for surfactant-free and safer sun protection formulations. Silasoma™ EP(S) microcapsules contain Ethylhexyl Methoxycinnamate and Dimethylamino Hydroxybenzoyl Hexyl Benzoate. It is developed and manufactured in Japan by SEIWA KASEI.

Sunsafe ® EHA is an organic, soluble filter that specifically absorbs UVB radiation within the range of 280 to 320 nm.It is permitted to be added at a maximum concentration of 8%. As a UV filter, it reduces the harmful effects that UV radiation has on skin, protects the skin from damage, and helps prevent premature skin aging and skin cancer caused by exposure to light.

Xperse® 501 is a dispersion of Zano® 20 Zinc Oxide in CCT and is COSMOS and Ecocert certified. The Zano® 20 in the product is uncoated Zinc Oxide providing highest levels of transparency. It provides a critical wavelength of 371nm and ~1.6 SPF units/w%. The Zano® range consists of three base products that each have a different tailored particle size distribution to deliver distinct UVA and transparency levels. Products are available as coated and uncoated powders and as Xperse® dispersions, some in combination with TiO2. Zano® & Xperse® are products from EverCare.