Products in Sunscreen Agents

SunSpheres(TM) Powder is a SPF booster polymer built on a unique hollow sphere technology that enables greater SPF efficiency in sun care and daily wear SPF products. The hollow spheres raise the UV protection over the whole UVA/UVB spectrum, working equally well with organic and inorganic actives.

Beauté by Roquette® CD 102 Cyclodextrin is a molecular encapsulating agent that can be used to help solubilize sensitive ingredients such as lipophilic actives, and enhance their efficacy in cosmetics and perfume applications. Benefits Controls the release of the encapsulated actives to help fragrances last longer Reduces the volatility of the encapsulated molecules (long-lasting effect) Increases water solubility and the bioavailability of actives (encapsulated molecules) Protects from UV radiation (for suncare and fragrance applications) Increases stability to heat, UV, chemicals or oxidants of oils, dyes, vitamins and perfumes Excellent scrubbing agent, alternative to plastic microbeads Features Natural cyclic oligosaccharide from starch, obtained via an enzymatic conversion Lipophilic central cavity and hydrophilic outer surface Very low solubility in water (about 18 g/L) Very resistant to acid, oxidative or enzymatic degradations

SunSpheres™ BIO SPF Booster is a bio-based and readily biodegradable SPF booster that enables greater SPF efficiency in sun care and daily wear SPF products. Program for the Endorsement of Forest Certification (PEFC) certified, it works with both organic and inorganic UV filters. SunSpheres™ BIO SPF Booster allows reduced amount of UV filters in formulations, enabling esthetically pleasing formulations that minimize potential irritation caused by UV actives, and it allows you to develop solutions that delight eco-conscious consumers. Features & Benefits Bio-based, readily biodegradable SPF booster Allows reduced amount of UV filters in formulations Excellent for esthetically pleasing formulations Excellent tool to design formulations for sensitive skin Useful for wide variety of cosmetic products using either inorganic or organic UV filters Non-irritating, non-toxic Non-whitening

Sunhancer™ Eco SPF booster is composed of micronized particles made from a blend of naturally derived and sustainably sourced waxes and increases the SPF of sun protection formulations. It enables formulators to reduce the proportion of UV filter ingredients in formulations while maintaining the same level of skin protection as traditional UV filter-based formulations. Moreover, the reduction of UV filter ingredient content enabled by the natural SPF booster tends to improve sunscreen esthetics and lightness while reducing oiliness and drag. Sunhancer™ Eco SPF booster is inherently biodegradable and non-persistent in the environment.

Lumicease™ blue ingredient is a ferment extract obtained through biotechnology from a radiation-resistant microorganism. This ingredient activates the epidermal photosensors, preparing, protecting, and repairing the skin from damage induced by solar and artificial blue light. By minimizing the main signs of digital and photoaging, Lumicease™ blue ingredient helps maintain skin health.

Solamer™ GR-8 polymer is a liquid polymer designed to provide broad-spectrum UV protection for hair only in leave-in and rinse-off hair care applications. It is compatible with a wide range of surfactants. Enables alcohol-based formulating and is water-soluble. It works over a broad pH range from 4 to 10.

Evonik iso-Octyl Chloride plays a crucial role as a building block in the synthesis of the highly active broad-spectrum UV absorber Bemotrizinol. This oil-soluble UVB and UVA absorber is a valuable additive in sunscreens, effectively absorbing UV rays. Its outstanding photostability ensures minimal photodegradation and decomposition over extended UV absorption periods, making it an ideal choice for sunscreens aimed at protecting young skin, in particular.

Dragonsorb® BP6 is a kind of water-soluble, neutral, broad-spectrum benzophenone ultraviolet absorber. It has a high absorption efficiency, is non-toxic, has no teratogenic side effects, and has good light and thermal stability. At present, it is the most commonly used light stabilizer, which can strongly and selectively absorb high-energy ultraviolet light and conduct energy conversion in the form of thermal energy. This substance is mainly used in water-soluble chemical sunscreens, sunscreens, and emulsions. It can improve the color durability of dyed textiles, prevent wool textiles from yellowing and synthetic fiber fabrics from fading, and can also be used in hair gel, mousse, and other hair products to prevent hair damage such as graying of hair caused by ultraviolet radiation.

Dragonsorb® 3035 has good compatibility with acrylic resin and can be used as a topcoat to improve the light resistance of the coating. As a UV absorber, this product is widely used in plastics, coatings, dyes, automotive glass, and cosmetics.

SunCaps™ Cellu ZinoCap™ is a type of encapsulated UV filter that is transparent and unbreakable, with zinc oxide encapsulated within it. It is made of a single-layer cellulose-based polymer shell that provides optimal isolation of the UV filter, prevents its degradation, and improves its UV protection profile. Moreover, it can help overcome incompatibilities between different UV filters, enabling the creation of new sunscreen combinations.

SunCaps™ AvoCap2™ is a type of encapsulated UV filter that is transparent and unbreakable, with avobenzone encapsulated within it. It is made of a single-layer cellulose-based polymer shell that provides optimal isolation of the UV filter, prevents its degradation, and improves its UV protection profile. This helps in retaining the sunscreen on the topmost layers of the skin, ensuring maximum protection against harmful UV rays. Additionally, the encapsulation prevents the crystallization of avobenzone.

MacDerma™ FA is found in the seeds and leaves of most plants such as oats, wheat and rice. It can also be found in coffee, apples, peanuts, artichoke, pineapple and oranges. It is an antioxidant which make it especially useful in the formulation of anti-aging cosmetics. MacDerma™ FA is an antioxidant that can destroy several different types of free radicals such as superoxide, hydroxyl radical and nitric oxide.

Vanirea® UP is a phyto-active substance obtained through hydroglycolic extraction (on propylene glycol or butylene glycol) from the pods of Tahiti vanilla (Vanilla tahitensis). It is a UV protector that combats oxidative stress, prevents photo-aging, and limits the appearance of "sunburn" cells. Vanirea® is a high-quality active ingredient that reinforces skin U.V. protection.

P.A.T Zinc Oxide UV is a physical sun-blocking agent primarily functioning by reflecting, scattering, and absorbing ultraviolet light. Its broad effectiveness spans UVB and UVA rays, offering stability in sunlight. This agent provides enhanced protection from UVA rays compared to titanium oxide or other sunscreen chemicals, making it a reliable choice for sun protection formulations.

BlueShield® is an eco-friendly active ingredient rich in capsanthin and capsanthin esters, specific and highly effective carotenoids. It is obtained from the cold pressing of red bell peppers grown in France and stabilized with vegetable glycerin and xanthan gum. The red bell peppers come from a responsible producer who has been committed to environmental protection for a long time.

Heliopure® Skinn is a concentrated form of fucoxanthin, a carotenoid obtained through the extraction of the microalgae Phaeodactylum tricornutum. This potent ingredient is stabilized in organic jojoba oil (Simmondsia chinensis). The microalgae are cultivated in a meticulously controlled environment, utilizing Blue Technology, and exposed to natural sunlight by Algatech, an entity of the Solabia Group known for its expertise in biotechnology. Heliopure® Skin offers a unique and valuable solution for skincare applications.

S-Block™ DZ 100 PDCC is a new zinc oxide dispersion designed to meet growing consumer demand for multi-functional sun care products that combine clinically validated claims with cleaner ingredients. The intersection between clean beauty and clinical treatment has created new product design problems that traditional silicone-based dispersions weren’t intended to solve.

G-Block™ DT 200 CCT is a fine and stable dispersion of UV-grade titanium dioxide in cosmetic oils with a high percentage of active content. It can be easily incorporated with conventional equipment into any personal care product to provide sun protection benefits.

G-Block™ DZ 480 CCT is an Ecocert and NPA-approved zinc oxide dispersion for broad-spectrum sunscreen formulations. This dispersion has a critical wavelength over 370nm, allowing formulators to pass the broad-spectrum wavelength test without the need for additional UV filters. It contains the highest concentration of zinc oxide for natural physical UV dispersions in the industry (70%), while still retaining good skin sensory qualities and strong transparency. DZ 480 CCT is also very stable, which creates reliably consistent SPF and critical wavelength results from one batch to the next.

G-Block™ DZ 370 CCT is an Ecocert and NPA-approved zinc oxide dispersion for broad-spectrum sunscreen formulations. This dispersion has a critical wavelength over 370nm, allowing formulators to pass the broad-spectrum wavelength test without the need for additional UV filters. It contains the highest concentration of zinc oxide for natural physical UV dispersions in the industry (70%), while still retaining good skin sensory qualities and strong transparency. DZ 370 CCT is also very stable, which creates reliably consistent SPF and critical wavelength results from one batch to the next.

G-Block™ DTB 300 CCT is a fine and stable dispersion of UV-grade and broad-spectrum titanium dioxide in cosmetic oils at a high percentage of active. It can be easily incorporated with conventional equipment into any personal care product to provide broad-spectrum sun protection.

Grant Industries UV Cut TiO2-41-DM is a UV protector boasting several key features. In terms of labeling claims, it proudly stands as a natural product, free from nanomaterials, and aligns with Ulta Beauty's Conscious Beauty ethos. As for its benefits, it excels in SPF enhancement, providing effective sun protection and UV shielding. Its versatility shines through in various applications, from color cosmetics to sun care and treatment products, making it an ideal choice in the personal care market.

Grant Industries UV CUT TiO2-C9-NA functions as a UV protector with labeling claims of being natural, adhering to the credo clean standard, and meeting Ulta Beauty's conscious beauty standards. Benefit claims focus on UV protection and SPF enhancement. This product targets the personal care market and is suitable for use in color cosmetics and sun care applications.

Grant Industries UV Cut ZnO-65-AC serves as a UV protector with labeling claims that emphasize being ULTA Beauty's conscious beauty compliant and natural. Benefit claims include sun protection, UV protection, and SPF enhancement. This product targets the personal care market and finds applications in color cosmetics, sun care, and treatment products.

Grant Industries UV Cut ZnO-50-W is a UV protector product with labeling claims of being nanomaterials-free, clean at Sephora, natural, and adhering to the Credo Clean standard. Benefit claims encompass sun protection, UV protection, and SPF enhancement. This versatile product is tailored for the personal care market and is suitable for use in color cosmetics, sun care, and treatment products.

Grant Industries UV CUT TiO2-40-NA is a UV protector product with labeling claims of being natural and meeting Ulta Beauty's conscious beauty standards. Benefit claims focus on UV protection and SPF enhancement. This product targets the personal care market and is suitable for use in color cosmetics and sun care applications.

Grant Industries UV Cut TiO2-65-SU is a UV protector with labeling claims of being natural and adhering to the Credo Clean standard. Benefit claims include SPF enhancement and UV protection. This product is designed for the personal care market and is applicable to color cosmetics and sun care applications.

Grant Industries UV CUT TiO2-60-C9 serves as a UV protector with labeling claims of being natural, adhering to the credo clean standard, and meeting Ulta Beauty's conscious beauty standards. Benefit claims include SPF enhancement and UV protection. This product is designed for the personal care market and is applicable to color cosmetics and sun care applications.

Grant Industries UV CUT ZnO-65-SU is a UV protector with labeling claims of adhering to the Credo Clean Standard and being natural. Benefit claims include UV protection and SPF enhancement. This product is designed for the personal care market and is applicable to color cosmetics and sun care applications.

Grant Industries UV Cut ZnO-61-DM is a UV protector designed to fulfill a crucial role. Its labeling claims are impressive, as it is proudly nanomaterial-free, aligns with Ulta Beauty's conscious beauty standards, and is recognized for its natural composition. In terms of benefits, it excels in providing effective sun protection, UV protection, and SPF enhancement. This product finds its place primarily in the personal care market and is highly versatile, making it a valuable addition to applications such as color cosmetics, sun care, and treatment products.

Grant Industries UV Cut TiO2-60-VL is a UV protector with the function of safeguarding against UV rays. Labeling claims include being natural, complying with the Credo Clean standard, and meeting Ulta Beauty's conscious beauty standards. Benefit claims encompass SPF enhancement and UV protection. This product is intended for the personal care market and is suitable for use in color cosmetics and sun care applications.

Grant Industries UV Cut ZnO-68-CG is a product designed to function as a UV protector. It boasts labeling claims of being nanomaterials-free and adhering to the Credo Clean standard, as well as meeting Ulta Beauty's conscious beauty standards. Benefit claims include sun protection, UV protection, and SPF enhancement. This product is primarily targeted at the personal care market and finds applications in color cosmetics, sun care, and treatment products.

Grant Industries UV Cut TiO2-55-CG is a product designed to function as a UV protector. Labeling claims include being natural, free of nanomaterials, adhering to the Credo Clean Standard, and meeting Ulta Beauty's conscious beauty standards. Benefit claims include spf enhancement, sun protection, and UV protection. This product is primarily targeted at the personal care market and finds applications in color cosmetics, sun care, and treatment products.

Grant Industries UV Cut TiO2-65-CC is a UV protector product with labeling claims of being natural, adhering to the Credo Clean standard, and meeting Ulta Beauty's conscious beauty standards. Benefit claims encompass SPF enhancement and UV protection. This product is intended for the personal care market and is suitable for use in color cosmetics and sun care.

Grant Industries UV Cut ZnO-61 is a UV protector with labeling claims of being nanomaterials-free, adhering to Ulta Beauty's conscious beauty standards, and being natural. Benefit claims include sun protection, UV protection, and SPF enhancement. This product targets the personal care market and is suitable for use in color cosmetics, sun care, and treatment products.

Grant Industries UV CUT TiO2-55-AC is a product designed as a UV protector. Labeling claims include adhering to the Credo Clean standard and meeting Ulta Beauty's conscious beauty standards. Benefit claims highlight UV protection. This product targets the personal care market and is used in applications like color cosmetics and sun care.