Products in Catalysts, Initiators & Crosslinkers

Banac MOR has chemical composition of N-Oxydiethylene 2-benzothiazole sulfenamide and used as an accelerator.

PC CAT® NP 99 is a polyurethane catalyst.

Mercure TBzTD is thiurams accelerators which is used mainly in rubber industry.

Richon® Vulcanizing Agent DTDM Powderwill provide heat/reversion/aging resistance in NR and synthetic rubbers. It is used as Sulfur donor vulcanizing agent for efficient vulcanization and semi-efficient vulcanization cure system..

A overspead accelerator for natural and synthetic rubber and latex. Curing active temperature is low. It can substitute for ZDBC、ZDEC、PZ, ect.. Operating safety is much better. Specially , it will not produce cancer-causing nitrosamize during the rubber manufacturing process , and it can be used as excellent activator to kinds of thiazole. Appropriate matching quantity of Zine oxide and sulfur when using , and aliphatic acid is not necessary .it can be added directly into rubber mass and also can be added into latex as component part. ZBEC is regulated for use in articles in contact with food as specified under FDA 21 CFR 175.105,177.2600 and under BgVV XXI, Categories 1-4 and”Sonderkategorie”.

Ruisil N-(2-aminoethyl-3-aminopropyl)methyldimethoxysilane RJ-602 is diamino functional type colorless transparent liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. However acetone and phenoxin can not be used as diluents. This product can also be soluble in water, but hydrolysis occurs and hydrolysates have a certain storage period.

PEROXAN BP-Pulver 50 W is Dibenzoylperoxide 50%, Powder in dicyclohexyl phthalate.PEROXAN BP-Pulver 50 W is used for the curing of unsaturated polyester resins and acrylic resins at ambient and elevated temperatures.

Metox BW90 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, it contains reduced content of hydrogen peroxide and water, and increased content of MEKP dimer.

Rongcheng Chemical General Factory Accelerator TMTD has a white or grayish white granular as a appearance.

PEROXAN PK295 P is 1,1-Di-(tert-butylperoxy)-3,3,5-trimethylcyclohexane 40%, Powder with chalk.PEROXAN PK295 P is used for the curing of unsaturated polyester resins.PEROXAN PK295 P is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

REAXIS® C416 is a liquid catalyst used in the synthesis and curing of polyurethanes. REAXIS® C416 provides for more of a delayed action cure and enhanced hydroltic stability compared to organotin carboxylates.

Actigran 50 and 70 are 50 % resp. 70 % preparations of trimethylolpropantrimethacrylate (TRIM) bound to inert carries in granular form. The use of Actigran 50 or 70 normally increases the cross-linking density of cured rubber compounds

Bostex 422 is a 60% active aqueous dispersion of French Process Zinc Oxide.

Nanjing Shuguang Chemical Group Accelerant SG-R 703 is mainly used as ultra accelerator for natural and synthetic rubbers, and lattices. It is more active than ZDC in solid elastomer. The latex including this product can be used for a week without pre-vulcanization. It is excellent activator for thiazole accelerator. SG-R 703 is also antioxidant in rubber mixing. and It can improve aging resistance for vulcanized rubbers without discoloration, contamination, and gives excellent dispersion.

PC CAT® NP 99 is a polyurethane catalyst.

MZ(ZMBT) Powder is a Rubber accelerator.

Hangzhou Hi-Tech Fine Chemical DPG (D) is a medium-speed vulcanization accelerator for natural rubber and synthetic rubber. It is generally used as a second accelerator, as an activator for thiazole, thiuram and sulfenamide accelerators, and can be used for continuous vulcanization when used together with accelerators MD and TMTD. In neoprene, this product acts as a plasticizer and peptizer. The vulcanizate has relatively high tensile strength and resilience, and low heat build-up.

PEROXAN HXY-85 W is 2,5-Dimethyl-2,5-di(tert.-butylperoxy)hexyne-3 85%, Solution in white oil.PEROXAN HXY-85 W is used for the (co)polymerization of ethylene, styrene, acrylates and methacrylates.PEROXAN HXY-85 W is used for the crosslinking of polyolefins as well as natural rubber and synthetic rubber.

Nurcacit ZDMC PDR is a fast curing accelerator for natural, synthetic rubber and latex. It can be used as accelerators of butyl rubber, acrylonitrile-butadiene rubber and EPDM rubber, non-toxic, inodorous, stainless and changeless in colors on products, suitable for coated fabric. It had wonderful effect in the products of EPDM rubber and butyl rubber.

PEROXAN C-50 A is Mixture of Cyclohexanone peroxide and Acetylacetone peroxide with plasticizer.PEROXAN C-50 A wird für die Härtung von Vinylesterharzen bei Umgebungstemperatur in Kombination mit einem Cobalt-Aminbeschleuniger (PERGAQUICK C24 AX) verwendet.

TexCross HM 45 is a HDI-based Polyisocyanate emulsifiable in almost all kinds of polymer dispersions. Increases the chemical and mechanical resistance of the bonds.

PEROXAN CND is Cumyl peroxyneodecanoate 75%, Solution in odorless white spirits.PEROXAN CND is used for the (co)polymerization of ethylene, vinylchloride and vinylidenechloride.

PX(ZEPC) Powder is a Rubber accelerator.

Resimene XT 911 ULF are amino cross-linkers for thermosetting surface coatings and rubber reinforcement.

Puyang Changyu Petroleum Resins MMB Powder can be used for natural and synthetic rubbers. As it is secondary antioxidant, ever better effects can be developed when used together with other antioxidants. Furthermore, when it is employed in case of sulfurless vulcanization higher heat resistance can be obtained, it also serves as an accelerator of CR and heat sensitizing agent for latices. It is effective not only white and light colored articles, but also for rubber products of all types. But unsuitable for food processing.

Mercure MBT is semi ultra-fast accelerator / its combinations with booster accelerators are used in NR, SBR, NR-SBR/BR blends, NBR, IIR, EPDM and other synthetic rubber based compounds used for the manufacture of motor cycle and scooter tires, butyl tubes, cycle tires and tubes, beltings, retreading materials, footwear, hot air cured products, hoses, cables and miscellaneous molded and extruded rubber products.

Puyang Changyu Petroleum Resins ZMBT(MZ)-LOW MZ(high M+) Powder is mainly used together with ZDMC and ZDEC as primary accelerator for latex; can achieve higher modulus of valcanized latex. In addition, it can achieve good compressive deformation resistance without additional curing time. ZMBT will not affect the stability of latex.

PC CAT® NP 99 is a polyurethane catalyst.

PEROXAN DB is Di-tert-butyl peroxide 98%, Liquid.PEROXAN DB is used for the (co)polymerization of ethylene, styrene, acrylates and methacrylates. PEROXAN DB is also used for the production of controlled rheology polypropylene (CR-PP).PEROXAN DB is used for the curing of unsaturated polyester resins and polymerization of styrene alkyde mixtures.PEROXAN DB is used for the crosslinking of polyolefins as well as natural rubber and synthetic rubber.

Otsuka Chemical ADVN is used at Low-temperature polymerization application. Technology in fabrics, resins, paints and adhesives is supported by catalyst chemistry in polymer chemistry. Otsuka Chemical contributes polymer industries by introducing variety of AZO type initiators in order to meet request from polymer industry with our technology.

PEROXAN A-50 M is Mixture of Acetylacetone peroxide and tert-Butyl hydroperoxide Solution in diacetone alcohol.PEROXAN A-50 M is used for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators.

Shandong Fine Chemical Technology NOBS is an excellent prolongation accelerator. It can be used alone or in combination with a small amount of additives. It is widely used in NR, SBR, NR-BR/SBR rubber compounds, in NBR and other synthetic rubber compounds, and used in the production of automobile tires, tire retreading materials, conveyor belts, and power. Transmission belts, rubber products with thick cross-sections, rubber products with heavy kinetic energy stress, rubber products with complex shapes, rubber shoes, injection products, cables, and various other molded and extruded rubber products.

Robinson Brothers ZPD 20198 acts as safer processing secondary accelerator.

Ethacure® 100 is an effective curing agent for polyurethanes and epoxy resins. It may also be used as a chain extender for polyurethane and polyurea elastomers, particularly in reaction injection molding and spray applications.

Metox 30 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. Due to the lowered water content is recommended for hardening gel coats, polymer concrete, some polyester varnishes and others. These initiators show an extended gelation time compared to Metox-50.

PEROXAN BP-Pulver 50 W + is Dibenzoylperoxide 50%, Powder in dicyclohexyl phthalate.PEROXAN BP-Pulver 50 W+ is used for the curing of unsaturated polyester resins and acrylic resins at ambient and elevated temperatures.