Products in Surface Modifiers

B2 is an anhydride modified polypropylene with lower odor. It is propene polymer with functionalized maleic anhydride, which is especially suitable for the reinforcing and compatibilizing of PP glass fiber and minerl fiber (talcum powder, calcium cabonate, mica, etc.).

ALTON AT 837 is a water-based additive free from ethoxylated nonylphenol, waxes and fats and paraffin specially designed for impregnated paper production. Excellent anti-blocking properties at low dosages. Dosing ALTON AT 837 (0,1-0,2 %) with UF resin in the impregnation bath, the UF resin migration to the paper surface is strongly reduced.

Tar-Cel 14-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar; gives easier, faster, and more accurate weighing.

Bifix PE 491-50 is a black master blue tone with high concentration of soot and mineral fillers. Intended for making thinner and thicker foils, as well as pipes. Possible application for the production of agrofoils of shorter shelf life.

Bifix PE 401-53 is a high quality master of snow white tone. It contains an anti-block, and is suitable for use in injection molding and extrusion of foils thicker than 40µm.

ChemPlasa Materials L-202P is Ethylene Bis Stearamide which used as a functional additive in plastics manufacturing.

United Chemical Technologies G6720 is applied in Epoxies, Urethanes, Acrylics, PBT’s Polysulfides.

Bifix PE 401-52 is a standard milky white master designed for painting medium-demanding applications in thick film extrusion and injection molding. Contains 50% pigment.

ACCR 112 is a fine white powder. It is processed from white marble.

Rosin Chemical(Wuping) Terpene Resin T-110 acts as a tackifier. It is processed from natural turpentine. It doesn't crystallize. It is transparent, neutral, electrically insulating, hydrophobic and non-poisonous. It can resist sparse acid, sparse alkali, heat, light and aging and has excellent viscidity. It dissolves easily in different kinds of synthetic matter such as fragrant hydrocarbon and vegetable oil. It is also an ameliorant of hot melting material. Terpene resin is widely used as industrial material in plastics, rubber, electric cable and packaging.

W1 is an anhydride modified polyolefin elastomer. W1 is ethylene elastomer with functionalized maleic anhydride, which is especially suitable for reinforced or toughened nylon.

FloTube™ 9101 CP510-9A20 TPU MB 20% contains 20% 9101FloTube™ carbon nanotubes with a smooth surface and good dispersion in the masterbatch.

HT9120 Petroleum Hydrocarbon Resin C9 HT-Series are low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through thermal-polymerization technique. HT9120 is a transparent granular solid with the color of yellow to light brown. HT9120 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

ChemPlasa Materials L-205F is Ethylene Bis Stearamide which used as a functional additive in plastics manufacturing.

Crosile®AK200 is afunctional water-based system adhesion enhancer.Used for enhancing adhesion and adhesion of most common emulsions and substrates such as water-based epoxy, water-based acrylic and water-based polyurethane. Such as: metal, glass, ceramics, concrete and other inorganic base materials.

Natro-Rez 10 is a Coumarone-Indene resin widely used in rubber, adhesives, paints, coatings, and allied industries. Natro-Rez 10 is also available as a dry liquid concentrate, CI 10 DLC?-A at 72% actives.

Bifix PE 491-42 is a master with 40% soot SRF type and mineral anti-block for use in injection molding, and in the manufacture of thicker foils and pipes.

United Chemical Technologies M8550 is applied in Unsaturated Polyesters and Acrylics.

esstar 15 is a esstar powders have an excellent fluidity and outstanding spraying properties.

ECOPOWER HC9130 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic polymerization technique. C9 petroleum resin HC9130 with the molecular weight is among 300-3000. Generally speaking, this kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier. HC9130 has the properties of good solubility, mutual solubility, water resistance, insulation, excellent chemical stability over acid and alkali, good adhesive strength, and low heat conduction.

FloTube™ 6101 CP120-6A10 PA66 MB 10% contains 10% 6101FloTube™ carbon nanotubes with a smooth surface and good dispersion in the masterbatch.

A-Len (Aleko Polymers) BIODEGRADABLE BD00TY is a biodegradable masterbatch which accelerates natural decomposition of polymers.

Ruisil 3-aminopropylmethyldimethoxysilane RJ-901 is colorless transparent liquid. It soluble in water(with reaction), alcohol and aromatic and aliphatic hydrocarbons. Ketones are not recommended as diluents.

Saudi Carbonate SCC PCC 40C - YB Specially coated is the most suitable grade for uPVC Profile and Pressure Pipes Applications. A tetra functional compound coated SCC PCC 40C - YB has an advantage in ease of manufacturing & molecule building thus providing better adhesion properties in polymer matrix. The dispersion characteristics are better and surface gloss of the end product is improved beside good weathering resistance.

Intercure® 2-DF4 is produced by IB Chem S.r.l. - INTERBUSINESS Group, is a phosphonium salt containing 4% of Paraffinic White oil. It is used as accelerator for Fluoroelastomers (FKM); adhesion promoter of Fluoroelastomers (FKM) to a variety of other elastomers; curative for Polyacrylate polymers (ACM) for which it increases the compound shelf life, improves compression set, and reduces the mold fouling.

SD Korea SBA-2013P is the promoter to improve bonding strength between interface of PVC and fiber. In the case of PVC paste sol it can be applied and is good in the points of sol viscosity stability called pot life.

Bifix PE 401-43 is a snow white economical master, popular in the production of pharmaceutical packaging and household products. Contains mineral fillers and anti-blocking.

A-Len (Aleko Polymers) ANTIBLOCK АВ70TС is an antiblock masterbatch intended to create an air layer between the surfaces of the opaque sleeve film of LDPE and/or LLDPE at blow film extrusion to avoid its blocking.

Tar-Cel 30-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar and gives easier, faster, more accurate weighing.

ECOPOWER C9 HC9140 Hydrocarbon Resin is a low molecular weight thermoplastic aromatic resin produced from petroleum derived C9 fraction through catalytic-polymerization technique.

Hedipin-R/360 comprises of castor oil, ethoxylated with 36 mol EO (INCI Declaration: PEG-36 castor oil). A non-ionic surfactant possessing excellent O/W emulsifying and detergent properties, suitable for applications in the agricultural Industry and other industries.

FloTube™ 9101CP240-9A10 PBT MB 10% contains 10% 9101FloTube™ carbon nanotubes with a smooth surface and good dispersion in the masterbatch.

Antitack BTO-44 VC is a powdered antitack agent, basically containing inert minerals in combination with calcium stearate, detergents, anti-foam and anti-rust agents for the treatment of unvulcanized rubber compounds, endless strips and granules. The product itself is most suitable for batch-off machines with spraying and dipping systems. After drying, the antitack film which remains on the surface of the rubber compounds is easy to control visually.

SCA 984 used in mechanical rubber goods or mineral filled surface treatments.

Antitack NP-97/TY-40 is a highly concentrated dispersion of zinc stearates. By means of new tech-nologies and high quality raw materials the zinc stearate content could be increased to more than 40 %.

TR 052 - A versatile additive that has found many uses in polymer applications such as compatibilization of dissimilar materials, dispersing agent and flow modifier.