Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Elastomers
Specialty Elastomers
Products in Specialty Elastomers
1,645 Products found in Specialty Elastomers
Browse
Applications
Show All 6 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
Physical Properties
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
ELASTOSIL® LR 5040/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Bathroom Accessories, Medical Devices
Features:
Low Volatility, Fast Curing, Excellent Productivity, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Good Mechanical Properties, Food Contact Acceptable
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 5040/60 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/60 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
Wacker Chemie AG
ELASTOSIL® LR 3040/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Household Goods, Automobile Door Seals
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Good Mechanical Properties, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 3040/40 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (Trousers) and ASTM D 624 B (crescent).
Wacker Chemie AG
ELASTOSIL® R Plus 4020/70 MH
Polymer Name:
Silicone Elastomer
Features:
Tear Resistance, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency, Excellent Transparency Properties
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® R Plus 4020/70 MH is a one-component, high consistency silicone rubber designed for the manufacture of molded articles. The cured articles demonstrate exceptional tear resistance and high transparency. This fast-curing silicone rubber also exhibits excellent tear resistance properties. The addition cure process ensures a significantly faster vulcanization reaction compared to peroxide curing materials. Additionally, it is important to note that no peroxide decomposition products are formed during the vulcanization process.
Wacker Chemie AG
SILPURAN® 6700/50 A/B
Processing Methods:
Injection Molding
End Uses:
Medical/Healthcare Applications, Medical Devices
Features:
Pigmentable, Low VOC, Good Electrical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Excellent Surface Properties, Good Mechanical Properties
Tear Strength:
24.0 - 24.0 kN/m
SILPURAN® 6700/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® R Plus 4070/30 MH
Polymer Name:
Silicone Elastomer
End Uses:
Automotive Components
Features:
High Consistency, Heat Stabilized
Tear Strength:
52.0 - 52.0 kN/m
ELASTOSIL® R Plus 4070/30 MH is a one-component, addition-curing silicone rubber that is specifically designed for the manufacture of molded articles. It exhibits self-bonding properties, eliminating the need for additional adhesive agents. This high consistency silicone rubber is particularly suitable for applications that require vibration damping capabilities.
Wacker Chemie AG
POWERSIL® 3100 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding
End Uses:
Electrical Components, Arresters, Insulators, Arresters Housings, Bushings, Power Transformers
Features:
High Impact Resistance, Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Shock Resistant, Arc Resistant, Excellent Dielectric Properties, Light Weight, High Consistency, Tracking Resistant, Long Term Protection
Tear Strength:
20.0 - 20.0 kN/m
POWERSIL® 3100 MH silicone rubber is a one-component, addition-curing compound that is ready to use and cures to an electrically insulating, highly erosion-resistant silicone elastomer. This product offers comparatively fast curing times compared to conventional silicone rubber, reducing cure times by 30-50%, depending on the wall thickness of the application, as well as the available machinery and runner system. Furthermore, no peroxide decomposition products are released during the curing process, reducing any potential hazards. The curing system also eliminates the risk of curing inhibition by oxygen.
Wacker Chemie AG
ELASTOSIL® LR 3003/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Plugs, Household Goods, Automobile Door Seals, Vibration Dampers, General Purpose, Batteries
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® LR 3003/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
SILMIX® M40 Gray
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
Tear Strength:
26.25 - 26.25 kN/m
SILMIX® M40 Gray is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are recognized for their good flexibility and mechanical properties. SILMIX® M40 Gray is designed for fabricating molded articles. Moreover, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
Wacker Chemie AG
ELASTOSIL® LR 3003/50 US A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Features:
Excellent Transparency Properties, Fast Curing, Excellent Mechanical Strength, Pigmentable
Tear Strength:
35.0 - 35.0 kN/m
ELASTOSIL® LR 3003/50 US A/B is a liquid silicon rubber that belongs to a product family that meets several compliance standards. These include 21CFR 177.2600, which covers "rubber articles intended for repeated use," Recommendation XV for silicones, BfR, USP 23 Class VI, and ISO 10993 for short-term implantation (less than 30 days).
Wacker Chemie AG
SILPURAN® 6600/60 A/B
End Uses:
Medical/Healthcare Applications, Gaskets, Valves, Medical Devices
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Excellent Surface Properties, Low Friction
Tear Strength:
26.0 - 26.0 kN/m
SILPURAN® 6600/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
SILPURAN® 6740/40 A/B
Processing Methods:
Injection Molding
End Uses:
Medical Devices, Medical/Healthcare Applications
Features:
Low VOC, Tear Resistance, Food Contact Acceptable, Low Volatility, Fast Curing, Excellent Surface Properties, Good Mechanical Properties, Pigmentable
Tear Strength:
27.0 - 27.0 kN/m
SILPURAN® 6740/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber compound with a short curing time. Vulcanizates are noted for their self-adhesive properties on various substrates and excellent mechanical properties. SILPURAN® 6740/40 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® R Plus 4846/30 MH
Polymer Name:
Silicone Elastomer
End Uses:
Automotive Connector Seals
Features:
Excellent Lubricity, Heat Stabilized, High Bleed Resistant, Fast Curing, Good Mechanical Properties, High Consistency
Tear Strength:
34.0 - 34.0 kN/m
ELASTOSIL® R Plus 4846/30 MH is a high-temperature vulcanizing (HTV) silicone rubber grade. It is a one-component compound that undergoes platinum-curing and is utilized in the production of molded articles. The vulcanizates generated from this compound develop a thin oil film with lubricating properties soon after the curing process. Since the crosslinking system relies on platinum cure, there are no peroxide decomposition products formed during the curing process.
Wacker Chemie AG
ELASTOSIL® LR 3094/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Distributor Caps, Plugs, Spark Plug Boots
Features:
Low VOC, Cost Effective, Heat Resistance, Good Electrical Properties, Good Mechanical Properties, Very Good Heat Resistance, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:
10.0 - 10.0 kN/m
ELASTOSIL® LR 3094/60 A/B is a paste-like, two-component compound of liquid silicone rubber with extremely short curing times. The vulcanizates of the product are noted for good mechanical as well as electrical properties and for excellent heat resistance. Due to the outstanding compression set, there is no need to post-cure technical parts.
Wacker Chemie AG
ELASTOSIL® S 699 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Aerospace Applications
Features:
High Flexibility, Medium Hardness, Good Moisture Resistance, Detergent Resistant, Lubricant Resistant, Excellent Leveling Properties, Fast Curing, Good UV Resistance, Alcohol Resistant, Low Density, Long Potlife, Good Weather Stability
Tear Strength:
8.3 - 8.3 kN/m
ELASTOSIL® S 699 A/B is a slightly self-leveling, 2-part silicone rubber used for molding applications. It is addition-curing and quickly cures at elevated temperatures, resulting in a permanently flexible and low-density vulcanizate that can be easily ground. Vulcanized ELASTOSIL® S 699 A/B offers excellent long-term stability against weathering, moisture, heat, and sunlight. The cured silicone rubber can endure constantly changing climatic conditions, sunlight, and temperatures as high as 200°C (392°F) without damage.
Wacker Chemie AG
SILMIX® M70 Red
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
Tear Strength:
29.75 - 29.75 kN/m
SILMIX® M70 Red is a compound used for fabricating vulcanizates that exhibit a unique combination of characteristics. They are known for their good flexibility and mechanical properties. SILMIX® M70 Red is designed for fabricating molded articles. Furthermore, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
Wacker Chemie AG
POWERSIL® 600 A/B
Processing Methods:
Casting
End Uses:
Cables, Arresters, Cable Accessories, Insulators, Wires, Prototyping
Features:
Good Weather Stability, Soft, Outdoor Durability, Castable, Good Erosion Resistance, Excellent Hydrophobic Properties, Excellent Mechanical Strength, UV Resistant, Excellent Dielectric Properties, Easier Processing, Low Viscosity, Tracking Resistant, Pourable
Tear Strength:
22.0 - 22.0 kN/m
POWERSIL® 600 A/B is a pourable, addition-curing, two-component silicone rubber that cures at room temperature. It is specifically designed for casting applications and forms soft products with high mechanical strength. This ready-to-use, two-component system is very easy to process thanks to its low viscosity. It offers excellent dielectric properties and is best suited for outdoor applications due to its UV and weathering resistance, as well as its excellent hydrophobic properties.
Wacker Chemie AG
ELASTOSIL® LR 3003/80 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers, General Purpose
Features:
Fast Curing, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility
Tear Strength:
12.0 - 12.0 kN/m
ELASTOSIL® LR 3003/80 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3004/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Cables, Automobile Door Seals, Vibration Dampers
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Mechanical Properties, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
35.0 - 35.0 kN/m
ELASTOSIL® LR 3004/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3003/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Household Goods, Automobile Door Seals, Vibration Dampers, General Purpose, Batteries
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Good Mechanical Properties, General Purpose, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
30.0 - 30.0 kN/m
ELASTOSIL® LR 3003/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® RT 601 A/B
Polymer Name:
Silicone Elastomer
Chemical Family:
Silicones
Product Type:
Potting Compound, 2K (2 component) Sealant, 2K (2 component) Coating, Encapsulant
Cure Method:
Chemical Cure, Air Dry
ELASTOSIL® RT 601 A/B is a pourable, addition-curing RTV-2 silicone rubber. It has a two-part formulation with a 9:1 mixing ratio. This product features low viscosity, medium cured hardness, and excellent tensile strength. The vulcanizate obtained is crystal clear and highly transparent. It is suitable for various applications such as all-round potting compound and the manufacture of molded articles through casting.
Wacker Chemie AG
ELASTOSIL® LR 3005/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers, Batteries
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:
16.0 - 16.0 kN/m
ELASTOSIL® LR 3005/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.
Wacker Chemie AG
ELASTOSIL® R 402/60 US
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Injection Molding, Transfer Molding
End Uses:
Door Profiles, Profiles, Medical/Healthcare Applications
Features:
High Tensile Strength, Good Extrusion Properties, Good Mechanical Properties, Shorter Cycle Time, Food Contact Acceptable, Good Green Strength, Good Moldability, High Clarity, High Consistency, Excellent Transparency Properties
Tear Strength:
35.0 - 35.0 kN/m
ELASTOSIL® R 402/60 US is a high-consistency silicone rubber (HCR) that is known for its high transparency and good mechanical properties. This product has a high green strength, making it suitable for the production of complex extruded profiles. Its vulcanizing characteristics allow for short cycle times in the manufacturing of rubber moldings through compression, transfer, and injection molding processes. The post-cured vulcanizates of this product are suitable for applications in the health care and food handling industries. ELASTOSIL® R 402/60 US is formulated with ingredients that are suitable for food contact applications, complying with Title 21 "Food and Drugs," Part 177.2600, which regulates rubber articles intended for repeated use. However, it is the responsibility of the user to ensure compliance with this regulation due to its limitations.
Wacker Chemie AG
ELASTOSIL® R Plus 4305/70
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Battery Cable, Plugs, Ignition Cables, Wires, Cables
Features:
Good Mechanical Properties, Low Compression Set, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency, Excellent Transparency Properties
Tear Strength:
39.0 - 39.0 kN/m
ELASTOSIL® R Plus 4305/70 is a two-component, high-consistency silicone rubber specifically developed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and demonstrate good to very good mechanical properties. This fast-curing silicone rubber displays good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
ELASTOSIL® LR 3066/80 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 3066/80 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 5040/20 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Medical Devices
Features:
Low Volatility, Fast Curing, Excellent Productivity, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Good Mechanical Properties, Food Contact Acceptable
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 5040/20 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/20 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
Wacker Chemie AG
ELASTOSIL® R Plus 4001/40 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Compression Molding, Transfer Molding
End Uses:
Automotive Components
Features:
Excellent Transparency Properties, Odorless, Heat Stabilized, Food Contact Acceptable, Fast Curing, Good Mechanical Properties, High Consistency
Tear Strength:
38.0 - 38.0 kN/m
ELASTOSIL® R Plus 4001/40 MH is a one-component, high-consistency silicone rubber designed for manufacturing molded articles. This addition-cure rubber yields cured articles with high transparency and excellent mechanical properties. It is known for its fast curing process, which is considerably quicker than that of peroxide-cured materials. Additionally, the vulcanization reaction does not produce any peroxide decomposition by-products.
Wacker Chemie AG
ELASTOSIL® R Plus 4105/40 US
Polymer Name:
Silicone Elastomer
Features:
Excellent Transparency Properties, Good Mechanical Properties, Tear Resistance, High Consistency, Food Contact Acceptable
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® R Plus 4105/40 US HCR silicone rubbers are two-part compounds (batch grades) that undergo addition curing. The resulting vulcanizates exhibit excellent transparency and good to very good mechanical properties. When properly post-cured, the vulcanizates of ELASTOSIL® R Plus 4105/40 US comply with BfR and FDA food contact regulations, ensuring their suitability for use in food-related applications. Additionally, the material meets the requirements of USP XXIII Class VI, further validating its suitability for use in medical and pharmaceutical applications.
Wacker Chemie AG
ELASTOSIL® LR 3070/30 US A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
ELASTOSIL® LR 3070/30 US A/B is a primerless, self-bonding liquid silicone rubber (LSR) grade that adheres to various plastic substrates, e.g. PA, PBT, and metals, but not to the mold surface. The bonding is improved by oven-curing for 1 hour at 100°C or 24 hours at room temperature.
Wacker Chemie AG
POWERSIL® 460 MH
Polymer Name:
Silicone Elastomer
End Uses:
Cables, Cable Accessories, Wires
Features:
Electrically Conductive, High Consistency
Tear Strength:
35.0 - 35.0 kN/m
POWERSIL® 460 MH is a ready-to-use electrically conductive silicone rubber grade specifically designed for compression molding. It already incorporates curing agent C1. This material is electrically conductive and is suitable for applications such as stress cones for cable accessories and cold shrink accessories.
Wacker Chemie AG
ELASTOSIL® LR 3842/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized
Tear Strength:
38.0 - 38.0 kN/m
ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
ELASTOSIL® R Plus 4305/80
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Battery Cable, Plugs, Ignition Cables, Wires, Cables
Features:
Good Mechanical Properties, Low Compression Set, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency, Excellent Transparency Properties
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R Plus 4305/80 is a two-component, high-consistency silicone rubber specifically designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and display good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
ELASTOSIL® LR 3071/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Food Contact Acceptable, Low Volatility, Fast Curing, Good Mechanical Properties
Tear Strength:
20.0 - 20.0 kN/m
ELASTOSIL® LR 3071/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3071 series. This product is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Its vulcanizates are noted for excellent mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® R Plus 4366/60
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Heat Stabilized, Food Contact Acceptable, Fast Curing, Low Coefficient of Friction, Good Mechanical Properties, High Consistency, Excellent Transparency Properties
Tear Strength:
41.0 - 41.0 kN/m
ELASTOSIL® R Plus 4366/60 is a high consistency silicone rubber specifically designed for the production of extruded articles. It undergoes addition curing as a two-component system. The cured articles demonstrate excellent transparency and exhibit good to very good mechanical properties. In comparison to ELASTOSIL® R plus 4305/60, post-cured parts made from ELASTOSIL® R Plus 4366/60 experience a reduction in coefficient of friction ranging from 50% to 70%.
Wacker Chemie AG
ELASTOSIL® LR 3844/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® LR 3844/40 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
ELASTOSIL® LR 3066/40 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
32.0 - 32.0 kN/m
ELASTOSIL® LR 3066/40 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® R 427/70
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion, Compression Molding, Injection Molding
End Uses:
Door Profiles, Profiles, Medical/Healthcare Applications
Features:
Tear Resistance, High Tensile Strength, Good Mechanical Properties, High Strength, Shorter Cycle Time, Good Tear Strength, Good Moldability, High Clarity, High Consistency, Excellent Transparency Properties
Tear Strength:
35.0 - 35.0 kN/m
ELASTOSIL® R 427/70 is a high-strength silicone rubber known for its outstanding transparency, excellent tear strength, and exceptional mechanical properties. It is particularly suitable for the production of extruded profiles. The vulcanizing characteristics of this product allow for short cycle times in the manufacturing of molded articles through compression, transfer, and injection molding processes. Post-cured vulcanizates of this product can be utilized in various applications within the healthcare and food handling industries.
Show
36
of 1,645 results
Go to page
1
2
3
4
5
6
7
8
9
10