Products in Polyurethane Rubbers

SANPRENE LQ-258 is used for resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability).

Millathane® 66RM (Premilled) is a peroxide-curable millable polyurethane rubber for the production of oil, fuel and chemical resistant parts which require excellent low and high temperature performance and high mechanical strength.

DLR Elastomer Engineering Ltd Sorbothane - Durometer 30 (Shore 00) is one of our polyurethane products. Sorbothane provides good vibration isolation and vibration damping characteristics, making them a very effective acoustic damper. This material can also be bonded to other materials such as PTFE & metals.orbothane is a proprietary, viscoelastic polymer. Sorbothane is a thermoset, polyether-based, polyurethane material. In addition to being viscoelastic, Sorbothane also has a very high damping coefficient. Sorbothane combines shock absorption, good memory, vibration isolation, and vibration damping characteristics. While many materials exhibit one of these characteristics, Sorbothane combines all of them in a stable material with a long fatigue life. Sorbothane has a low creep rate compared to other polymers (rubber, neoprene, silicone, etc.)Sorbothane has a superior damping coefficient, over a very wide temperature range, compared to any other polymerSorbothane’s operating temperature range is -20° to +160° Fahrenheit (-29° to 72° Celsius)Unlike fluid-based shock absorbers or foam products, Sorbothane absorbs shocks efficiently for millions of cyclesSorbothane eliminates the need for metal springs to return the system to its equilibrium position after absorbing a shock

Millathane® UV is an ultra-violet curable millable polyurethane compound typically used with Millathane® 97, but other Grades can be used as well. Millable polyurethane extrusions can be continuously cured and products molded using UV light without the use of ovens, microwaves or salt bath units. (Patent Pending) These curable compounds can be extruded or calendered onto fabric or as an unsupported sheet and then continuously cured by passing them through a UV-curing conveyor belt chamber. Molded parts can be press-cured using special transparent molds to allow curing with UV light, or can be cured in a UV chamber. Time of irradiation varies with the nature and type of material, the type and concentration of other ingredients, and the type and power of the light source. They are great for extruding hollow tubing and other continuous shapes, such as bars, rods, L-channels, U-channels, square tubing, and the like. It’s great for extruded protective covering over all types of cables, hoses, and protective conduit.

RS-6285 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation and abrasion resistance.

RS-6570 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation, and abrasion resistance. This material is easily pigmented to any color required.

Millathane® 76 is a sulfur or peroxide curable polyester millable polyurethane rubber, used in many applications because of its excellent oil resistance, high damping characteristics, and high strength and abrasion resistant properties.

Millathane® 66R is a peroxide-curable millable polyurethane rubber for the production of oil, fuel and chemical resistant parts which require excellent low and high temperature performance and high mechanical strength.

Millathane® 5004M (Premilled) is a peroxide-curable millable polyurethane rubber used for production of parts for many applications including seals, gaskets, rollers, and diaphragms.

RS-6294 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation and abrasion resistance.

Millathane® E34 is a sulfur or peroxide curable polyether millable polyurethane rubber used for the production of parts in applications including rollers, seals, footwear, belting, and gaskets. It gives excellent strength and abrasion resistance properties, especially in sulfur cured compounds, and has very good processing characteristics.

PU Resin For Glove Production

Millathane® 55 is a sulfur, peroxide or isocyanate curable polyether millable polyurethane rubber used for the production of rubber covered rollers, belting and other molded articles.

RS-6110 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation and abrasion resistance.

DLR Elastomer Engineering Ltd Sorbothane - Durometer 70 (Shore 00) is one of our polyurethane products. Sorbothane provides good vibration isolation and vibration damping characteristics, making them a very effective acoustic damper. This material can also be bonded to other materials such as PTFE & metals.Sorbothane has a superior damping coefficient, over a very wide temperature range, compared to any other polymerSorbothane’s operating temperature range is -20° to +160° Fahrenheit (-29° to 72° Celsius)Unlike fluid-based shock absorbers or foam products, Sorbothane absorbs shocks efficiently for millions of cyclesSorbothane eliminates the need for metal springs to return the system to its equilibrium position after absorbing a shock

Millathane® 55M (Premilled) is a sulfur, peroxide or isocyanate curable polyether millable polyurethane rubber used for the production of rubber covered rollers, belting and other molded articles.

RS-3650 is a high strength, flexible urethane that is well suited for a wide variety of applications. This material is a shore A-70 hardness urethane that offers high toughness, elongation and flame resistance. This material meets UL 94/V-0 requirements.

Millathane® 97 is a polyether polyurethane rubber having excellent transparency, good wear properties, a high coefficient of friction, and very good UV stability. This polyurethane rubber is designed for applications in shoe soling, roll coverings, and all other applications where transparent, brightly colored, or decorative products are desired.

Millathane® 66 is a peroxide-curable millable polyurethane rubber for the production of oil, fuel, and chemical-resistant parts which require excellent low and high-temperature performance and high mechanical strength. As is typical of polyurethanes, it also has excellent abrasion resistance.

Millathane® E34M (Premilled) is a sulfur or peroxide curable polyether millable polyurethane rubber used for production of parts for many applications including rollers, seals, footwear, belting and gaskets. Millathane E34 gives excellent strength and abrasion resistance properties, especially in sulfur cured compounds, and has very good processing characteristics.

Millathane® 5004 is a peroxide-curable millable polyurethane rubber used for production of parts for many applications including seals, gaskets, rollers, and diaphragms.

Millathane® CM is a sulfur or peroxide curable polyether millable polyurethane rubber with excellent physical properties and abrasion resistance.

PU Resin For Glove Production

RS-6560 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation, and abrasion resistance. This material is easily pigmented to any color required.

RS-6540 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation, abrasion resistance. This material is easily pigmented to any color required.

Millathane® 76M (Premilled) is a sulfur or peroxide curable polyester millable polyurethane rubber, used in many applications because of its excellent oil resistance, high damping characteristics and high strength and abrasion resistance properties.

Millathane® E40 is a sulfur or peroxide curable polyether millable polyurethane rubber used for the production of parts for many applications including rollers, seals, footwear, belting, and gaskets.

PU Resin For Glove Production

RS-6300 is a medical grade high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation and abrasion resistance. This material will meet the requirements of medical grade class VI specifications.

Millathane® 26 is often used in non-food handling applications, including rollers, because of its hydrolysis resistance and good strength properties. The inherent hydrolysis resistance of polyether urethanes makes it more forgiving in steam autoclave cure processes than polyester grades.

RS-6290 is a high strength, flexible urethane that is well suited for a wide variety of applications. It offers high toughness, elongation and abrasion resistance.

DLR Elastomer Engineering Ltd Sorbothane - Durometer 50 (Shore 00) is one of our polyurethane products. Sorbothane provides good vibration isolation and vibration damping characteristics, making them a very effective acoustic damper. This material can also be bonded to other materials such as PTFE & metals.Sorbothane has a superior damping coefficient, over a very wide temperature range, compared to any other polymerSorbothane’s operating temperature range is -20° to +160° Fahrenheit (-29° to 72° Celsius)Unlike fluid-based shock absorbers or foam products, Sorbothane absorbs shocks efficiently for millions of cyclesSorbothane eliminates the need for metal springs to return the system to its equilibrium position after absorbing a shock

Surkopak® 5244 is a plasticising polyurethane resin intended for nitrocellulose based inks and coating systems. An extensive range of aromatic polyether based Surkopak® products is available in a choice of hardness and plasticising effects, which can be applied to both rigid and flexible substrates.

Andur 800-AP is the result of several years of research to develop a high performance, moderate cost prepolymer for the cast urethane industry. This new product is a poly-ester/ether, toluene diisocyanate-terminated prepolymer. An elastomer with a hardness of 80 Shore A is obtained by reaction with Curene 442. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or with plasticizers.

Silpak RU-420 is a two-component, 100% solids Urethane Elastomer RTV developed for its Softness (Low Durometer), High Flexibility and Elongation properties. This softer RTV provides High Stretch and High Tear Resistant properties that can be used for making molds or rubber parts. Molds are used to cast concrete, plaster and wax parts.

The Hapflex 500 series offers a full range of soft durometers, from 45 - 95 Shore A, while the Hapflex 600 series yields harder durometers on the Shore D scale ranging from 50 - 70 Shore D. All are relatively fast, room curing, flexible systems that do not require post curing, but can be accelerated with moderate heat for faster curing. Most Hapflex 500 & 600 products are offered in 2 speeds: a standard 30-45 minute working time, and a 3-6 minute working time for fast demold.The Hapflex elastomers are low viscosity, making them easy to handle and pour, yet still provide precise duplications of surface details surface finishes.In addition, the Hapflex elastomers are virtually shock resistant and unbreakable, making them exceptionally well suited for permanent molds, parts or master patterns that will not crack or chip during use or storage. A major advantage is the superior abrasion resistance properties of the Hapflex elastomers.Precision tracing patterns, roll coverings, fixtures, flexible parts, forming dies, bending tools, and a variety of foundry applications are just a few examples of Hapflex applications.Available in Flame Retardant