Products in Additives: Synthetic Esters

LEXOLUBE Z-100 is a high viscosity polymer ester suitable for use as an additive or co-base stock to boost viscosity, viscosity index and lubricity. Long chain length adds tack and body to lubricant formulations. Because of its inherent polarity, it is generally incompatible with mineral oil and PAO base oils.

LEXOLUBE Z-6000 is a high viscosity polymer ester suitable for use as an additive to boost viscosity, viscosity index and lubricity. Long chain length adds tack and body to lubricant formulations. Because of its inherent polarity, it is generally incompatible with mineral oil and PAO base oils.

LEXOLUBE CG-3000 is an environmentally friendly, high viscosity synthetic complex ester especially suited as a thickener and co-base stock with vegetable oils. It allows great flexibility to blend high performance vegetable based lubricants to ISO VG 320 and above. LEXOLUBE CG-3000 provides excellent boundary protection, and can be used as an antiwear/extreme pressure additive to eliminate or reduce chlorine, sulfur and/or phosphorus additives in lubricant formulations. With greater than 50% renewable content and high biodegradability, the product in on the LuSC list, making it a great choice for any EAL formula, such as those required by the Vessel General Permit (VGP) or EcoLabel. LEXOLUBE CG-3000 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570.

LUBRICIT DOS is an sebacate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Sebacate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT S75 is a sorbitan monoester used as a 100% bioderived emulsifier and lubricity additive for environmentally friendly metalworking fluids. It can be used to create stable oil-in-water or water-in-oil emulsions. This economical non-ionic surfactant is also used as a dispersant and wetting agent in food, personal care and health care products.

LUBRICIT DIOA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties, such as compressors and grease. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT SMO-VEG is sorbitan monooleate used as a 100% bioderived emulsifier, corrosion inhibitor and lubricity additive for environmentally friendly metalworking fluids. It can be used to create stable oil-in-water or water-in-oil emulsions. This multifinctional non-ionic surfactant is also used as a dispersant and wetting agent in food, personal care and health care products. The VEG version utilizes select vegetable derived oleic fatty acids.

LEXOLUBE 3Q-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation and low temperatue fluidity, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LUBRICIT SSO-VEG is sorbitan sesquioleate used as a 100% bioderived emulsifier and lubricity additive for environmentally friendly metalworking fluids. It can be used to create stable oil-in-water or water-in-oil emulsions. This multifunctional non-ionic surfactant is also used as a moisturizer and emollient in personal care and health care products. The VEG version utilizes select vegetable derived oleic fatty acids.

LUBRICIT PGDO is an oleic acid based diester with high viscosity index and high bioderived content. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the structure provides good hydrolytic and thermal stability, making it a good choice for hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT NGDO is an oleic acid based polyol diester with high viscosity index and high bioderived content. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the polyol core structure provides good hydrolytic and thermal stability, making it a good choice for hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT STO-VEG is sorbitan trioleate used as a 100% bioderived emulsifier and lubricity additive for environmentally friendly metalworking fluids. It can be used to create stable oil-in-water or water-in-oil emulsions. This multifunctional non-ionic surfactant is also used as a dispersant and wetting agent in inks, paints and coatings, personal care and health care products. The VEG version utilizes select vegetable derived oleic fatty acids.

LUBRICIT 9538/1 is a complex dimer ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation. LEXOLUBE 9538/1 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570.

LUBRICIT DOA is an adipate diester fluid that is used as a synthetic base oil for formulations requireing outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT NGDC is an NPG polyol diester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product has high bioderived content and good oxidative stability.

LUBRICIT 2-EH iC9 is a medium chain fatty acid ester with exceptional low temperature properties. The highly branched structure that is well suited for use in grease or water-based metalworking fluids as a base stock or additive component.

LUBRICIT SMO is sorbitan monooleate used as a 100% bioderived emulsifier, corrosion inhibitor and lubricity additive for environmentally friendly metalworking fluids and oilfield products. It can be used to create stable oil-in-water or water-in-oil emulsions. This multifunctional non-ionic surfactant is also used as a dispersant and wetting agent in food, personal care and health care products.

LUBRICIT GTL is a fully saturated glycerol triester derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. 100% bioderived content, high biodegradability and low aquatic toxicity make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 9547 is a pentaerythritol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. It is optimal in terms of oxidation, and offers exceptional low temperature flow properties.

LUBRICIT SMP is sorbitan monopalmitate used as a 100% bioderived emulsifier and lubricity additive for environmentally friendly metalworking fluids. It can be used to create stable oil-in-water or water-in-oil emulsions. This well known non-ionic surfactant is also used as a dispersant and wetting agent in food, personal care and health care products.

LUBRICIT NGDP/1 is an NPG polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability, low temperature fluidity, and high bioderived content are required.

LUBRICIT 2-EHO is a long chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a base fluid or friction modifier for a broad range of metalworking applications.

LUBRICIT 9538 is a complex dimer ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LUBRICIT 2-EHC16 is a long chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a lubricity additive or friction modifier for a broad range of metalworking applications.

LEXOLUBE HS-S is a patented, hydrolytically stable ester that is well suited for use in water-based metalworking fluids as a base stock or additive component.

LUBRICIT 9515 is a polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range and good oxidative stability.

LUBRICIT GDL is a glycerol diester derived from saturated natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. 100% bioderived content, high biodegradability and low aquatic toxicity make it an excellent choice for EAL hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT GMO is a glycerol monooleate derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LEXOLUBE 3I-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LUBRICIT PE 118 is an oleic acid based polyol ester based on pentaerythritol. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the polyol core structure provides good hydrolytic and thermal stability, making it a good choice for hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 2-EHAZ is an azelate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Azelate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 2-EHL is a medium chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a lubricity additive or friction modifier for a broad range of metalworking applications.

LEXOLUBE 2I-214 is an NPG polyol diester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LUBRICIT 2-EHS is a saturated long chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a lubricity additive or friction modifier for a broad range of metalworking applications.

LUBRICIT 2-EHC is a long chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a lubricity additive or friction modifier for a broad range of metalworking applications.

LUBRICIT SML-LV is sorbitan monolaurate, used as a 100% bioderived emulsifier and lubricity additive for environmentally friendly metalworking fluids. It can be used to create stable oil-in-water or water-in-oil emulsions. This well known non-ionic surfactant is also used as a dispersant and wetting agent in food, personal care and health care products. The LV version is specially manufactured to have a lower viscosity for improved handling and blending.