Products in Thermoplastic Filament

INFINAM® PEEK 9359 F is a filament created by extruding natural-colored VESTAKEEP® polyether ether ketone (PEEK) resin. This semi-crystalline polymer boasts exceptional thermal and chemical resistance. This material finds application in various industries, including aerospace and automotive. When used with fused deposition modeling (FDM) technology, it offers advantages such as reduced material consumption, improved mechanical properties of printed parts, and greater design flexibility for our customers.

PETG is a high-strength transparent thermoplastic with excellent moisture and chemical resistance. It does not require a heated print bed, is easy to use, and has low shrinkage and minimal odor. It is excellent for applications where strong, transparent prints are desired, and it is widely used in mechanical parts fabrication and robotics. MG Chemicals premium 3D printing filaments are manufactured under strict quality control to ensure consistency. Our spools have a large hub to ensure uniform winding, and cut-outs on the sides so the user can easily see how much filament is left.

PolyBarb Filament PC is a series of high quality and easy to print Poly Carbonate / PBT Blend filaments with printed mechanical properties approximate to chopped carbon fiber filled PEI, allowing for significantly stronger parts printed at lower temperature.

PolyBarb Filament PEI85 is a series of high quality and easy to print PolyEther Imide filaments with printed mechanical properties surpassing to chopped carbon fiber filled PEI, allowing for significantly stronger parts.

PolyBarb Filament PEEK is a series of high quality and easy to print PolyEther Ether Ketone filaments with printed mechanical properties surpassing chopped carbon fiber filled PEEK, allowing for significantly stronger parts.

PLA is the most popular resin for 3D printing because it is easy to use and has almost no odor. It adheres well to masking tape without requiring a heated printing bed or noxious solvents. It is an optimal choice for homes, schools and laboratories, and has many commercial applications. MG Chemicals premium 3D printing filaments are manufactured under strict quality control to ensure consistency. Our spools have a large hub to ensure uniform winding, and cut-outs on the sides so the user can easily see how much filament is left.

Fabru TPU is a thermoplastic elastomer.

Ultimaker PP (polypropylene) is durable. It has high toughness,exceptional fatigue resistance, and low friction. It also has good chemical,temperature, and electrical resistance. PP is one of the most widely usedplastics on the planet. From electrical components to living hinges, PP isthe go-to material for prototyping and end-use products.

Zortrax Z-ASA Pro is a thermoplastic which is durable and exhibits superior resistance to external factors, including UV radiation and extreme weather conditions. Using Z-ASA Pro, you can 3D print models and prototypes which will withstand changing temperature, humidity or sunlight, and keep their initial shape and excellent esthetics. Z-ASA Pro is a way to go for prototypes of sporting equipment and specialized tools, fadeproof models for outdoor purposes or unvarnished automotive elements. Since the weather cannot be changed, Z-ASA Pro is the right material which will help you extend the life span of 3D printed objects used outside.

PLA (Polylactic Acid) 3D printer filament. The most commonly used 3D printing media, the benefits of PLA include affordability, easy to use, large color selection, and low print temperature.

Gianeco PLA FILAMENT polylactic acid is used in extrusion, injection, fiber, 3D printing, filament and thermoforming.

Fabru LCP is resistance to acids, resistance to alkalis, general chemical resistance, hydrolytically resistant.

Essentium PA-CF is a carbon fiber-infused polyamide filament specially formulated for additive manufacturing. Essentium PA-CF provides exceptional strength, durability, thermal stability, and stiffness that is customary of carbon fiber materials. Essentium PA-CF is readily printable with a wide processing window, providing a highly accessible engineering-grade solution or open platform and even open-air printers. It is important to note, the mechanical properties of PA may change with water uptake as this material is moisture sensitive. The best prints with Essentium PA typically occur utilizing a glass bed and a bed adhesion solution, such as a PA-solvent liquid compound.

Volaprint PC / ABS Black colored molding compound.

Fibrolon® 3D Wood by FKuR is comprised of Copolyester Resin and Polylactic Acid. It is commonly used

PLA (Polylactic Acid) 3D printer filament. The most commonly used 3D printing media, the benefits of PLA include affordability, easy to use, large color selection, and low print temperature.

Essentium 9085 is a high performance polyetherimide blend made with SABIC ULTEMTM 9085 resin. Essentium 9085 has excellent long term temperature performance and toughness. The base resin meets FAR 25.853 and OSU 65/65 for flammability, heat release, smoke density and toxicity. Parts printed from Essentium 9085 are ideal for aerospace, automotive, and industrial components that must meet strict requirements for strength, temperature performance, and flammability.

LUVOCOM® 3F PEKK 50082 is engineered to outperform the standard PEKK materials available in the market. It comes with enhanced flow behavior which improves the printability and layer adhesion. This unique modified neat PEKK provides dimensional stability and is printable in non-heated chambers, delivering semi-crystalline parts with no warp.

Extrudr Flex Medium Blue is a durable elastomere based on Polycaprolacton-Polyester. It was specially developed for industrial applications and is ideally suited for the production of elastic and damping components. The material is optimized for the FFF/FDM process in regards to thermal stability and better flow properties. The raw material is compliant according to the REACH- and RoHS-Standards.

Z-ABS is a versatile and economic material which perfectly matches the needs of users who begin their work with 3D printing as well as professionals who want to make savings on in-house prototyping. With a wide selection of post-processing methods, either mechanical or chemical, Z-ABS becomes well-suited not only for producing affordable prototypes, but also for creative applications, such as conceptual models, gadgets or figurines. Z-ABS is something you seek for if you need to 3D print low-cost, attractive-looking objects or prototypes with functional requirements.

ASA (Acrylonitrile styrene acrylate) is a plastic with mechanical properties similar to ABS but hydrophobic and UV resistant. It is ideal for 3D prints with an outside use on for example terrases or boats. It create pieces that will withstand outdoor conditions and weather.

ASA (Acrylonitirle Styrene Acrylate) 3D Printing Filament- 750grams made from premium UV-resistant resin. Printed parts made from this material offer exceptional UV-stability making it a great choice for outdoor applications. ASA also exhibits excellent mechanical and thermal properties. Manufactured in the USA by Push Plastic using premium ASA resin. This material is a great substitute for normal ABS when resistance to outdoor exposure is needed.Manufactured from 100% virgin resin and then spooled onto 750 gram reels, the filament is then vacuum-sealed with desiccant.

Volaprint Nylon natur colored molding compound.

PSU High temperature resistance allows the creation of networks capable of transporting solvents, hydrocarbons, acids, and bases.

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.

Z-PETG is an industrial-grade material which offers outstanding resistance to impact of time, most acids and alcohols, and weak alkalies. Its properties include durability and tensile strength. Z-PETG is the best choice for prototypes which will undergo real crash tests, including industrial trials that involve oils and greases. Z-PETG is a blend of the popular PET material and glycol. This helped to eliminate the brittleness of models and boost their durability. Z-PETG will support your innovative ideas with its low shrinkage level, and allow you to create prototypes of complex mechanisms, automotive parts, and manufacturing tools unaffected by some chemicals.

GreenTEC Pro Silver is a high-performance biopolymer, with optimized characteristics for technical and mechanical applications. This material offers excellent temperature resistance and layer adhesion, as well as an appealing semi-matt finish. GreenTEC Pro is in compliance with the FDA-, REACH- and RoHS-Standards.

Z-SUPPORT High-Temp is a breakaway support filament designed to withstand high temperatures necessary for printing polymers like Z-PEEK, Z-PEI 1010, or Z-PEI 9085. The material ensures high rigidity when the printing process is underway to guarantee appropriate stability to the structures of the model. When the printing is done and the model cools down, Z-SUPPORT High-Temp becomes more brittle which makes support removal easier. This way, Z-SUPPORT High-Temp serves double purpose. First, high-performance polymers have mechanical properties comparable to metals so using them to print support structures makes support removal almost impossible. Second, such materials are usually expensive so wasting them on printing supports is quite inefficient. Breakaway Z-SUPPORT HT is there to solve both those problems.

Essentium’s TPU 58D-AS is an industry-first ESD safe and anti-static 58D Shore hardness thermoplastic polyurethane filament that is available in a variety of colors. This cutting-edge material resulted from a close collaboration between Croda and Essentium to develop an exclusive anti-static filament line based on Croda Ionphase™ permanent antistatic additives. It has excellent impact strength, tear strength, and abrasion resistance and is safe for clean room and electronics manufacturing applications.

Ultimaker CPE is chemical resistant, strong, tough, and demonstrates gooddimensional stability. CPE is available in a wide range of colors, includinggrayscale for more professional looking models.

Nanovia PA-6 blends mechanical, heat, and chemical resistance. It is widely used for industrial application, this filament with not snap and tear apart progressively.

Volaprint ABS S Natur is a natural colored molding compound.

Z-GLASS is a material with unparalleled properties that will allow you to successfully replace brittle glass elements in your functional prototypes and show what is within them. Its low shrinkage level makes it possible to 3D print defect-free models which will be durable and scratchproof, including automotive and electronics objects. With Z-GLASS, you can create light-transmitting objects that will remain unaffected by heavy exposure to light (high UV resistance) or most acids and alcohols, and weak alkalies. All these advantages make this material ideal not only for industrial sector but also for creating interior design elements.

Z-ESD is a material which perfectly fits the needs of the industrial sector, especially the electrical and electronics industries. It is durable, warpage resistant, and provides protection against electrostatic discharge which can be particularly damaging to electronic equipment. This unique property can significantly help to reduce the loss of electronic components and generate savings. Z-ESD allows you to print functional objects, elements and casings containing highly sensitive electronics, and tools used for control processes.

Zortrax Z-PLA is an ecological material which is derived from natural, biodegradable resources. Its main advantages include a very low shrinkage rate and a high degree of hardness. With no limits to shapes and complexity of models, Z-PLA gives you the possibility to print high-quality parts, detailed conceptual objects, and even consumer goods. Its smooth surface will also provide exceptional esthetics for mock- -ups, decorative elements, and educational models. Z-PLA has become a popular choice for environment-friendly 3D printing.

With Ultimaker PC filament, you can print strong and tough parts thatretain dimensional stability when subjected to temperatures as high as110 °C. Our PC is engineered to be printed at moderate temperaturescompared to other PC filaments and shows minimized warping to providea seamless 3D printing experience.