Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Engineering & Specialty Polymers
High Performance Thermoplastics
Products in High Performance Thermoplastics
2,174 Products found in High Performance Thermoplastics
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
Physical Properties
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Evonik
VESTAKEEP® 5000 P
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Scatter Coating, Extrusion, Coating, Compression Molding, Isostatic Molding, Injection Molding, Sintering
Materials Features:
Flame Resistant, Good Thermal Stability, Semi Crystalline, Chemical Resistant, High Viscosity, Unreinforced, Low Flammability
VESTAKEEP® 5000 P is a high-viscosity polyether ether ketone powder known for its outstanding thermal and chemical resistance. This unreinforced, semi-crystalline polymer offers superior performance in challenging environments. VESTAKEEP® 5000 P exhibits low flammability, ensuring enhanced safety. It is supplied as a powder conveniently packaged in boxes with moisture-proof polyethylene liners. Experience the reliability and versatility of VESTAKEEP® 5000 P for your specific applications. This high-viscosity powder delivers exceptional thermal and chemical resistance, making it suitable for a wide range of industrial uses. Choose VESTAKEEP® 5000 P for its superior properties and ease of handling in your projects.
Evonik
VESTAKEEP® 2000 G
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Isostatic Molding, Extrusion, Injection Molding
Flexural Modulus:
3596.58 - 3596.58 MPa
Materials Features:
High Degree of Crystallinity, Flame Resistant, Foamable, Low Coefficient of Friction, Good Stain Resistance, Oil Resistant, Low Viscosity, Unreinforced, Good Aging Behavior, Food Contact Acceptable, Weldable, Solvent Resistant, Good Optical Properties, Detergent Resistant, Creep Resistant, X-Ray Transparent, Non-Migrating, Low Flammability, Good Thermal Stability, Acid Resistant, Non Corrosive, Good Impact Strength, Radiation Resistant, Alkali Resistant, Very Good Heat Resistance, Good Adhesion, Chemical Resistant, Low Smoke Emission, Oxidation Resistant, Semi Crystalline, Grease Resistant, Good Environmental Stress Crack Resistance (ESCR), Medium Viscosity, Fatigue Resistant, High Hydrolytic Stability, Self Extinguishing
Color:
Natural
VESTAKEEP® 2000 G is a medium viscosity, unreinforced polyether ether ketone designed for injection molding applications. This semi-crystalline polymer offers superior thermal and chemical resistance, ensuring high-performance results. Parts manufactured from VESTAKEEP® 2000 G exhibit low flammability, enhancing safety. The material is compatible with common injection molding machines for thermoplastics, simplifying the manufacturing process. For optimal results, we recommend a melt temperature range of 360°C to 380°C during the injection molding process, with a mold temperature within 160°C to 200°C, preferably at 180°C. VESTAKEEP® 2000 G is supplied as granules in 25 kg boxes with moisture-proof polyethylene inliners, ensuring convenient storage and handling. Choose VESTAKEEP® 2000 G for its reliability, ease of processing, and exceptional properties, enabling the production of high-quality injection molded parts.
Evonik
VESTAKEEP® 4000 P
Polymer Name:
Polyetheretherketone (PEEK)
Chemical Family:
Polyether Ether Ketone (PEEK)
Processing Methods:
Scatter Coating, Injection Molding, Coating, Extrusion, Sintering, Compression Molding
Materials Features:
Chemical Resistant, Flame Resistant, Good Thermal Stability, Low Flammability, High Viscosity, Unreinforced, Semi Crystalline
Color:
Natural
VESTAKEEP® 4000 P is an unreinforced, high-viscosity polyether ether ketone powder. It can be used for manufacturing compounds or as a scatter powder for composites. The semicrystalline polymer offers superior thermal and chemical resistance. VESTAKEEP® 4000 P has low flammability.
Evonik
VESTAKEEP® 4000 FP
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Compression Molding, Injection Molding, Sintering, Electrostatic Spray Coating, Extrusion
Materials Features:
High Stiffness, Low Flammability, Water Resistant, Good Thermal Stability, Acid Resistant, Flame Resistant, Abrasion Resistant, Alkali Resistant, High Strength, Oil Resistant, Chemical Resistant, Hydrocarbon Resistant, High Viscosity, Dimensional Stability, Unreinforced, Semi Crystalline, Salt Water/Spray Resistant, Food Contact Acceptable, Wear Resistant, Solvent Resistant
Color:
Natural
VESTAKEEP® 4000 FP is an unreinforced, high-viscosity polyether ether ketone fine powder. It can be used as a basic resin or blended with different additives for manufacturing compression molding parts. This semi-crystalline polymer exhibits excellent thermal and chemical resistance. VESTAKEEP® 4000 FP has low flammability.
Evonik
VESTAKEEP® L 4000 G
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Isostatic Molding, Profile Extrusion, Extrusion, Injection Molding, Film Extrusion
Additives Included:
Lubricant (Unspecified)
Flexural Modulus:
3445.0 - 3445.0 MPa
Materials Features:
Oil Resistant, Good Thermal Stability, Light Weight, High Temperature Application, High Dielectric Strength, Gasoline Resistant, High Pressure Applications, Acid Resistant, Seawater Resistant, Semi Crystalline, Chemical Resistant, Alkali Resistant, Service Life Extension, Lubricated, Good Mechanical Properties, Low Flammability, Solvent Resistant, High Strength, Wear Resistant, Food Contact Acceptable, Abrasion Resistant, Hydrocarbon Resistant, Electrically Insulating, Salt Water/Spray Resistant, Dimensional Stability, Good Compressive Strength, High Viscosity, Ductile, Creep Resistant, Cost Effective, Hydraulic Fluid Resistant, Unreinforced, High Stiffness, Crack Resistant, Easier Processing, Water Resistant
VESTAKEEP® L 4000 G is a high-viscosity, unreinforced, lubricated polyether ether ketone suitable for injection molding and extrusion. The semicrystalline polymer offers superior thermal and chemical resistance. Parts made from VESTAKEEP® L 4000 G have low flammability and can be processed using standard machines for thermoplastics.
Evonik
VESTAKEEP® 5000 CF30
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Isostatic Molding, Injection Molding, Extrusion
Fillers Included:
Carbon Fiber
Materials Features:
High Temperature Application, High Dielectric Strength, Dimensional Stability, Gasoline Resistant, High Pressure Applications, Acid Resistant, Seawater Resistant, Chemical Resistant, High Viscosity, Alkali Resistant, Hydraulic Fluid Resistant, Good Mechanical Properties, Solvent Resistant, High Stiffness, High Strength, Wear Resistant, Abrasion Resistant, Water Resistant, Hydrocarbon Resistant, Electrically Insulating, Salt Water/Spray Resistant, Oil Resistant
VESTAKEEP® 5000 CF30 is a Polyether Ether Ketone compound with a filler content of 30% carbon fibers and an ultra-high viscosity. It is primarily used for injection molding parts and is produced through a multistage process using hydroquinone and 4,4'-difluorobenzophenone building blocks.
Evonik
VESTAKEEP® 4000 GF30
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Extrusion, Injection Molding, Isostatic Molding
Fillers Included:
Glass Fiber
Materials Features:
High Strength, Oil Resistant, High Viscosity, Good Compressive Strength, Low Shrinkage, Wear Resistant, Solvent Resistant, Low Warpage, Creep Resistant, High Stiffness, Low Flammability, Good Thermal Stability, Acid Resistant, Alkali Resistant, High Temperature Application, High Pressure Applications, Chemical Resistant, Hydrocarbon Resistant, Gasoline Resistant, Dimensional Stability, Semi Crystalline, Salt Water/Spray Resistant, Crack Resistant, Good Mechanical Properties, Good Rigidity, Water Resistant, Flame Resistant, Abrasion Resistant
Color:
Natural
VESTAKEEP® 4000 GF30 is a glass fiber-reinforced (30%) polyether ether ketone specifically designed for injection molding applications. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance, ensuring exceptional performance. Parts manufactured from VESTAKEEP® 4000 GF30 exhibit low flammability, enhancing safety. Compatible with common injection molding machines for thermoplastics, this material simplifies the manufacturing process. Experience the reliability and versatility of VESTAKEEP® 4000 GF30 in your injection molding applications. With its glass fiber reinforcement, it provides enhanced strength and rigidity, while maintaining excellent properties in challenging environments. Choose VESTAKEEP® 4000 GF30 for its superior mechanical performance, thermal stability, chemical resistance, and ease of processing, enabling the production of high-quality injection molded parts.
Evonik
VESTAKEEP® 3300 G High Purity
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Extrusion, Compression Molding, Isostatic Molding, Injection Molding
Flexural Modulus:
3348.54 - 3348.54 MPa
Materials Features:
Chemical Resistant, Unreinforced, Semi Crystalline, High Purity, Medium Viscosity, High Hydrolytic Stability, Low Flammability, Good Thermal Stability, Flame Resistant
Color:
Natural
VESTAKEEP® 3300 G High Purity is an unreinforced polyether ether ketone specifically designed for injection molding and extrusion. Refined using Evonik's advanced filtration technology, this medium-viscosity polymer offers exceptional thermal and chemical resistance. Parts manufactured with VESTAKEEP® 3300 G High Purity exhibit low flammability, ensuring enhanced safety. Compatible with standard thermoplastic machines, it can be easily processed. For injection molding, we recommend a melt temperature range of 360°C to 380°C with a mold temperature of 160°C to 200°C, preferably 180°C. This product is supplied in 25 kg boxes with moisture-proof polyethylene liners, conveniently packaged as granules. Choose VESTAKEEP® 3300 G High Purity for its superior properties and reliability in your injection molding and extrusion applications.
Evonik
VESTAKEEP® 4000 CF30
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Extrusion, Injection Molding, Isostatic Molding
Fillers Included:
Carbon Fiber
Materials Features:
High Strength, Oil Resistant, High Viscosity, Good Compressive Strength, Good Tribological Properties, Wear Resistant, Solvent Resistant, Creep Resistant, High Stiffness, Low Flammability, Good Thermal Stability, Acid Resistant, Alkali Resistant, High Temperature Application, High Pressure Applications, Chemical Resistant, Hydrocarbon Resistant, Gasoline Resistant, Dimensional Stability, Semi Crystalline, Salt Water/Spray Resistant, Crack Resistant, Good Mechanical Properties, Water Resistant, Flame Resistant, Abrasion Resistant
Color:
Natural
VESTAKEEP® 4000 CF30 is a polyether ether ketone (PEEK) reinforced with 30% carbon fiber. It is specifically designed for injection molding. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance. Parts made from VESTAKEEP® 4000 CF30 have low flammability. It can be processed using standard injection molding machines for thermoplastics.
Evonik
VESTAKEEP® 5000 FP
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Compression Molding, Injection Molding, Sintering, Electrostatic Spray Coating, Extrusion
Materials Features:
High Stiffness, Low Flammability, Water Resistant, Good Thermal Stability, Acid Resistant, Flame Resistant, Abrasion Resistant, Alkali Resistant, High Strength, Oil Resistant, Chemical Resistant, Hydrocarbon Resistant, High Viscosity, Dimensional Stability, Unreinforced, Semi Crystalline, Salt Water/Spray Resistant, Wear Resistant, Solvent Resistant
Color:
Natural
VESTAKEEP® 5000 FP is an unreinforced, high-viscosity polyether ether ketone fine powder. This versatile material can be used as a basic resin or in blends with different additives for manufacturing compression molding parts. The semi-crystalline polymer offers superior thermal and chemical resistance, making it suitable for demanding applications. VESTAKEEP® 5000 FP exhibits low flammability, ensuring enhanced safety. It is supplied as a powder in 10 kg boxes with moisture-proof polyethylene liners, providing convenient and reliable storage. Choose VESTAKEEP® 5000 FP for its exceptional properties and versatility in manufacturing compression molding parts. Experience the reliability and performance of this high-viscosity powder in your specific applications.
Evonik
VESTAKEEP® 5000 G
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Extrusion, Injection Molding, Isostatic Molding
Materials Features:
High Strength, Oil Resistant, High Viscosity, Ductile, Good Electrical Properties, Unreinforced, Good Compressive Strength, Wear Resistant, Solvent Resistant, High Ductility, Creep Resistant, High Stiffness, Low Flammability, Electrically Insulating, Cost Effective, Good Thermal Stability, Flame Retardant, Acid Resistant, Alkali Resistant, High Temperature Application, High Pressure Applications, Service Life Extension, Chemical Resistant, Hydrocarbon Resistant, High Temperature Resistance, Seawater Resistant, Gasoline Resistant, Dimensional Stability, Easier Processing, Semi Crystalline, Salt Water/Spray Resistant, Hydrolysis Resistant, Crack Resistant, Hydraulic Fluid Resistant, High Dielectric Strength, Light Weight, Good Mechanical Properties, Water Resistant, Flame Resistant, Abrasion Resistant, Corrosion Resistant
Color:
Natural
VESTAKEEP® 5000 G is a high-viscosity, unreinforced polyether ether ketone suitable for injection molding and extrusion. It is a semi-crystalline polymer with superior thermal and chemical resistance. Parts made from VESTAKEEP® 5000 G have low flammability and can be processed using standard machines for thermoplastics.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ 1000 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Color:
Grey
Physical Form:
Rods, Bars, Plates
Ketron® Sterra™ 1000 PEEK is an unfilled, general-purpose grade known for its exceptional elongation and toughness. It is ideal for instrument and seal components, where ductility and inertness are crucial. Ketron® Sterra™ 1000 PEEK portfolio, featuring recycled content for a reduced carbon footprint compared to non-recycled materials.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ HPV PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Additives Included:
Lubricant (PTFE), Lubricant (Graphite)
Fillers Included:
Carbon Fiber
Color:
Black
Physical Form:
Plates
Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ CA30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Fillers Included:
Carbon Fiber
Color:
Brown, Grey
Physical Form:
Rods, Bars, Plates
Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
KyronMAX® S-9230
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Injection Molding
Flexural Modulus:
31000.0 - 31000.0 MPa
KyronMAX® S-9230 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of PEEK (Polyetheretherketone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPEEK base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the aerospace, medical, and industrial industries where high temperature, strength and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesMedical devices, implants and components in medical equipment that require high strength and biocompatibility.KyronMAX® S-9230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered.It's also worth mentioning that PEEK is a biocompatible material and can be used in medical applications, but it's important to note that should be evaluated for the specific application and use case.
SABIC's Specialties Business
LEXAN™ Copolymer 4504
Polymer Name:
Polycarbonate (PC)
Additives Included:
Heat Stabilizer, Mold Release Agent
Processing Methods:
Injection Molding
Flexural Modulus:
2300.0 - 2300.0 MPa
SABIC's Specialties Business High heat resistant polycarbonate copolymer, provides DTUL of 290F at 264 psi. FDA food contact compliant in limited colors. Effective January 15th, 2008 this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HPH4504. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
LEXAN™ Copolymer 4704
Polymer Name:
Polycarbonate (PC)
Additives Included:
Heat Stabilizer, Mold Release Agent
Processing Methods:
Injection Molding
Flexural Modulus:
2300.0 - 2300.0 MPa
SABIC's Specialties Business High heat resistant polycarbonate copolymer, provides DTUL of 300F at 264 psi. FDA food contact compliant in limited colors. Effective January 15th, 2008 this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HPH4704. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
LEXAN™ VISUALFX™ Resin FXD144R
Polymer Name:
Polycarbonate (PC)
Additives Included:
Mold Release Agent
Processing Methods:
Injection Molding
Transparent/translucent medium viscosity grade for light diffusion. FDA compliant. Color package may affect performance.
SABIC's Specialties Business
Dianhydrides & Imides 1000F3SP
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Sintering, Injection Molding
Additives Included:
Flame Retardant
ULTEM 1000F3SP powder is a RoHS compliant polyetherimide (PEI) powder offering a glass transition temperature (Tg) of 217ºC. This FDA compliant powder is available in a spherical shape with an average particle size (D50) of 15 micron and a maximum particle size (D100) of 75 micron.
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound 2F005
Polymer Name:
Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
5200.0 - 5200.0 MPa
LNP THERMOCOMP 2F005 compound is based on Ethylene Tetrafluoroethylene (ETFE) resin containing 25% glass fiber.
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound LCF62E
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber, Glass Fiber
Flexural Modulus:
36490.0 - 36490.0 MPa
SABIC's Specialties Business LNP™ THERMOCOMP™ LCF62E compound is based on Polyetheretherketone (PEEK) resin containing 10% carbon fiber and 30% glass fiber. Added features of this grade include: Easy Molding, Electrically Conductive.
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound LC006EXQ
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber
Flexural Modulus:
27230.0 - 27230.0 MPa
LNP THERMOCOMP LC006EXQ compound is based on Polyetheretherketone (PEEK) resin containing 30% carbon fiber. Added features of this grade include: Electrically Conductive, Easy Molding.
SABIC's Specialties Business
ULTEM™ Resin MD147
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Additives Included:
Flame Retardant
Transparent, high flow Polyetherimide (Tg 217C)
SABIC's Specialties Business
ULTEM™ Resin AR9300
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant
SABIC's Specialties Business ULTEM™ Resin AR9300 is a 30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound GX94043L
Polymer Name:
Polysulfone (PSU)
Processing Methods:
Injection Molding
Fillers Included:
Mineral
Flexural Modulus:
3800.0 - 3800.0 MPa
SABIC's Specialties Business LNP THERMOCOMP GX94043L compound is based on Polysulfone (PSU) resin containing mineral. Added features of this grade include: Low Extractables. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound 5C004
Polymer Name:
Polyvinylidene Fluoride (PVDF)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber
Flexural Modulus:
13930.0 - 13930.0 MPa
LNP™ THERMOCOMP™ Compound 5C004 is a Polyvinylidene fluoride (PVDF) resin-based compound infused with 20% carbon fiber, imparting excellent electrical conductivity. This grade offers remarkable stiffness and strength characteristics, making it well-suited for applications in electrical and electronics, energy management, electronic components, and industrial material handling. The compound is processed using injection molding techniques.
SABIC's Specialties Business
ULTEM™ Resin CRS5201R
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant, Mold Release Agent
SABIC's Specialties Business 20% Glass fiber filled, standard flow Polyetherimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO Conforming. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin 4002
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Fillers Included:
PTFE
Additives Included:
Flame Retardant, Lubricant (Unspecified)
Flexural Modulus:
3100.0 - 3100.0 MPa
ULTEM™ Resin 4002 is a PTFE filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL 94 V0 and 5VA listing in recognized colors.
SABIC's Specialties Business
ULTEM™ Resin DT1810EVUCL
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Additives Included:
Flame Retardant, Mold Release Agent, Heat Stabilizer
Flexural Modulus:
3100.0 - 3100.0 MPa
ULTEM™ Resin DT1810EVUCL has improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility.
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound LF004EX1
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
7400.0 - 7400.0 MPa
SABIC's Specialties Business LNP™ THERMOCOMP™ LF004E1 compound is based on Polyetheretherketone (PEEK) resin containing 20% glass fiber. Added features of this grade include: Easy Molding and Low Warpage
SABIC's Specialties Business
LNP™ THERMOTUF™ Compound DF002PSI
Polymer Name:
Polycarbonate (PC)
Additives Included:
Impact Modifier
Fillers Included:
Glass Fiber
Processing Methods:
Injection Molding
SABIC's Specialties Business LNP THERMOTUF DF002PSI compound is based on Polycarbonate (PC) resin containing 10% glass fiber. Added features of this grade include: Impact Modified, High Flow, Ductile, Good Chemical Resistance. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin ATX200R
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Additives Included:
Flame Retardant, Mold Release Agent, Plasticizer (Polycarboxylate), Heat Stabilizer
SABIC's Specialties Business High flow Polyetherimide blend with internal mold release. ECO Conforming, UL94 V0 Listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin MD131A
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Transparent, enhanced flow Polyetherimide (Tg 217C). US FDA and EU Food Contact compliant.
SABIC's Specialties Business
ULTEM™ Resin 1000F3SP
Polymer Name:
Polyether Imide (PEI)
Chemical Family:
Polyetherimide (PEI), Polyimides (PI)
Additives Included:
Flame Retardant
SABIC's Specialties Business ULTEM™ Resin 1000F3SP is an unreinforced, amorphous polyetherimide (PEI) powder available with an average particle size (D50) of 15 microns and a maximum particle size (D100) of 75 microns. It features an impressive glass transition temperature (Tg) of 217°C, excellent mechanical, electrical, and dimensional properties up to high temperatures, very good chemical resistance for an amorphous material, and inherent flame retardancy. The material is RoHS-compliant and is transparent amber in color once processed. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound LC008EXP
Polymer Name:
Polyetheretherketone (PEEK)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber
Additives Included:
Mold Release Agent
Flexural Modulus:
22900.0 - 22900.0 MPa
LNP THERMOCOMP LC008EXP compound is based on Polyetheretherketone (PEEK) resin containing 40% carbon fiber. Added features of this grade include: Electrically Conductive, Easy Molding.
SABIC's Specialties Business
ULTEM™ Resin 1010
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Extrusion Blow Molding (EBM), 3D Printing, Compression Molding, Foam Extrusion, Extrusion, Injection Molding, Profile Extrusion, Film Extrusion, Compounding, Injection Compression Molding
Additives Included:
Flame Retardant
Flexural Modulus:
3300.0 - 3300.0 MPa
SABIC's Specialties Business ULTEM™ Resin 1010 is an unreinforced amorphous polyetherimide (PEI) resin that offers a high glass transition temperature (Tg) of 217°C and improved flow. Its features include excellent mechanical, electrical, and dimensional properties up to high temperatures. The material also offers very good chemical resistance for an amorphous material and is inherently flame retardant, offering UL94 V0 and 5V ratings as well as aerospace FAR 25.853 compliance. ULTEM™ Resin 1010 is RoHS compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B. Compliance for colored variants needs to be checked on a case-by-case basis. The base material is transparent amber-colored but is also available in custom colors, both transparent and opaque. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Show
36
of 2,174 results
Go to page
1
2
3
4
5
6
7
8
9
10