Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Parts, Shapes & Films
Products in Parts, Shapes & Films
1,838 Products found in Parts, Shapes & Films
Filters
Suppliers
Applications
Physical Form
Polymer Name
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Mitsubishi Chemical Group Corporation
Duratron® T4301 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
Creep Resistant, Lubricated, Low Thermal Expansion, Low Coefficient of Friction, Wear Resistant, Improved Stick-Slip Response, High Tolerance, Odorless, Dimensional Stability, High Flexural Modulus
Density:
1450.0 - 1450.0 kg/m³
Tensile Modulus:
5500.0 - 5500.0 MPa
Color:
Black
Duratron® T4301 PAI Polyamide-imide is a high-performance plastic that offers exceptional properties for severe service wear applications. The addition of PTFE and graphite provides this grade with improved wear resistance and dimensional stability, making it an ideal solution for non-lubricated bearings, seals, bearing cages, and reciprocating compressor parts.Features:Very low expansion rate and coefficient of frictionLittle to no slip-stick in useExcellent dimensional stability over a wide temperature rangeHigh flexural modulus of 1,000,000 psiHigher wear resistance compared to unfilled Duratron® T4203 PAI gradeBenefits:Allows for increased bearing speeds and extended part lifeCan be used in severe service wear applicationsIdeal for non-lubricated bearings, seals, bearing cages, and reciprocating compressor partsApplications:Bearings and bearing cagesSealsReciprocating compressor partsOther severe service wear applicationsCompression-molded Duratron T4501 PAI is similar in composition to Duratron T4301 PAI, and is selected when larger shapes are required. Prior materials for these applications include steel cages, hardened steel balls, and bronze bushings. Duratron T4301 PAI (colour: black) also offers excellent dimensional stability over a wide temperature range.
Mitsubishi Chemical Group Corporation
Ertacetal® H POM-H
Polymer Name:
Polyacetal Homopolymer (POM)
Physical Form:
Plates, Rods
Features:
High Hardness, Creep Resistant, Excellent Stiffness, Low Thermal Expansion, Low Moisture Absorption, Wear Resistant, High Strength, Excellent Mechanical Strength, Improved Wear, Good Machinability
Density:
1430.0 - 1430.0 kg/m³
Tensile Modulus:
3700.0 - 3700.0 MPa
Ertacetal® H / Acetron® H Polyoxymethylene POM-H is a homopolymer acetal grade that offers exceptional mechanical strength, stiffness, hardness, and creep resistance, making it the perfect choice for a wide range of demanding applications.Features:Superior mechanical properties that allow the use of standard fastenersExcellent stability and machining properties that reduce machining costsDurable material that allows for easy installation and removal with minimal distortionHigh chemical resistance for a long service lifetimeHigh impact strength, even at low temperaturesExcellent dimensional stability with low water absorptionBenefits:Reduced machining costs and improved efficiency in manufacturingLong-lasting and durable components that can withstand demanding conditionsEasy installation and removal, even in tight spacesHigh chemical resistance ensures a long service lifetimeHigh impact strength, even at low temperatures, ensures reliable performance in any environmentExcellent dimensional stability ensures consistent and accurate resultsApplications:Small diameter, thin-walled bushings and bearingsGearsElectrical componentsMedical and diagnostic equipmentValvesFluid handling components
Mitsubishi Chemical Group Corporation
Fluorosint® 500 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Plates, Rods
Features:
Good Tribological Properties, Good Mechanical Properties, Good Stability, Wear Resistant, Low Deformation Tendency, High Tolerance, Odorless, High Performance, Excellent Hydrolysis Resistance, Dimensional Stability, Chemical Resistant, Service Life Extension, Non Abrasive, Low Friction
Density:
2320.0 - 2320.0 kg/m³
Tensile Modulus:
1750.0 - 1750.0 MPa
Color:
Tan
Fluorosint® 500 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added stability and wear resistance. This material is designed to excel in demanding applications where high performance, reliability, and tight dimensional control are required.Key features:Nine times greater resistance to deformation under load than unfilled PTFE: provides excellent wear and deformation resistanceLow coefficient of linear thermal expansion: approaches the expansion rate of aluminum and is 1/4 that of virgin PTFE, eliminating fit and clearance problems for designersPTFE base: provides excellent chemical resistance, low friction, and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:High resistance to deformation under load, making it ideal for sealing applications where tight dimensional control is requiredLow coefficient of linear thermal expansion, eliminating fit and clearance problems in high temperature and dynamic environmentsEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Sealing applications where tight dimensional control is requiredHigh temperature and dynamic environments where fit and clearance are a concernChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires stability and wear resistance in harsh environments.Fluorosint® 500 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added stability and wear resistance, Fluorosint® 500 is an excellent choice for applications in chemical processing, aerospace, automotive and other industries where tight dimensional control and high-performance sealing are required.
Mitsubishi Chemical Group Corporation
Semitron® ESd 480 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Rods, Tube, Plates
Features:
Dimensional Stability, Chemical Resistant, ESD Protection, High Tolerance, Static-Dissipative, Odorless
Density:
1460.0 - 1460.0 kg/m³
Tensile Modulus:
5900.0 - 5900.0 MPa
Color:
Black
Semitron® ESd 480 Polyetheretherketone PEEK electro static dissipative shapes are a top choice for critical test fixture and wafer handling applications in wet process tools, where static dissipation is critical. These shapes are specifically designed to provide excellent chemical resistance properties and high dimensional stability under varying environmental conditions.Features:Excellent chemical resistance propertiesHigh dimensional stability under varying environmental conditionsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for critical test fixture and wafer handling applications in wet process toolsProvides a dissipative range of 106 - 109 ohms/sq, ensuring static dissipation is criticalDimensionally stable, making it ideal for critical test fixture applicationsApplications:Test fixture and wafer handling applications in wet process toolsStructural applications in wet process tools where static dissipation is importantWell-suited for use in wafer handling and other structural applications in wet process tools where static dissipation is important.
Mitsubishi Chemical Group Corporation
Ketron® CM GF30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Creep Resistant, Corrosion Resistant, Good Stability, High Strength, High Tolerance, Odorless, Dimensional Stability, Chemical Resistant, High Stiffness, High Flexural Modulus
Density:
1590.0 - 1590.0 kg/m³
Tensile Modulus:
5858.2 - 5858.2 MPa
Color:
Black
Ketron® CM GF30 Polyetheretherketone PEEK, a compression-molded, 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This brownish-grey colored material is designed for applications where high strength, stiffness, and stability are needed in extreme environments. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for large structural applications that require superior strength, stiffness, and stability Benefits: Offers a higher stiffness and creep resistance than Ketron 1000 PEEK Has a much better dimensional stability Ideal for structural applications carrying high static loads for long periods of time at elevated temperatures Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® CM GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® CM GF30 PEEK is the ideal solution. However, it is important to note that the glass fibers tend to abrade the mating surface so the suitability for sliding parts should be carefully examined.
Mitsubishi Chemical Group Corporation
Ertalon® 6 SA PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Rods, Tube, Plates
Features:
Electrically Insulating, Good Machinability, Chemical Resistant, X-Ray Shielding, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, General Purpose, Creep Resistant, Excellent Stiffness, Wear Resistant, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3300.0 - 3300.0 MPa
Ertalon® 6 SA is a high-performance polyamide (PA6) material that boasts a combination of excellent mechanical, electrical and chemical properties. Its exceptional mechanical strength, stiffness, toughness and damping properties make it a versatile choice for a wide range of mechanical construction and maintenance applications.Features:Superior mechanical strength and stiffnessExcellent toughness and damping propertiesResistance to creep and wearExcellent electrical insulationOutstanding chemical resistanceBenefits:Durable and long-lasting performance in demanding mechanical applicationsExcellent resistance to wear and tear, even in harsh environmentsHigh level of electrical insulation for safety and reliabilityResistant to a wide range of chemicals, making it suitable for a variety of applicationsApplications:Mechanical construction and maintenanceIndustrial equipment and machineryAutomotive and transportation componentsElectrical and electronic componentsGeneral engineering and manufacturing
Mitsubishi Chemical Group Corporation
Duratron® U2200 PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
Food Contact Acceptable, Low Thermal Expansion, Low Odor, Amorphous, High Tolerance, Dimensional Stability, High Strength to Weight Ratio, High Temperature Resistance, High Tensile Strength, High Rigidity
Density:
1410.0 - 1410.0 kg/m³
Color:
Brown
Duratron® U2200 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, high temperature resistance, and a low Coefficient of Linear Thermal Expansion. With 20% glass-reinforcement, Duratron® U2200 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:20% glass-reinforced for exceptional rigidity and dimensional stabilityHigh temperature resistanceLow Coefficient of Linear Thermal ExpansionExceptional strength-to-weight ratio and increased tensile strengthGreat electrical insulatorBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability, low thermal expansion and electrical insulation is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsElectrical insulationApplications that require dimensional stability, high temperature resistance and low thermal expansionDuratron® U2200 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments while providing electrical insulation, Duratron® U2200 PEI is the ideal solution.
Mitsubishi Chemical Group Corporation
Ketron® LSG PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
X-Ray Sterilizable, Heat Resistance, Biocompatible, Gamma Sterilizable, Life Science Grade, Plasma Gas Sterilizable, Excellent Mechanical Strength, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Chemical Resistant, High Stiffness
Density:
1310.0 - 1310.0 kg/m³
Tensile Modulus:
4300.0 - 4300.0 MPa
Color:
Yellow, Green, Red, Black, Beige, Blue
Ketron® LSG PEEK is a product available in the form of plates and rods, offering exceptional heat and excellent sterilization resistance through methods like steam, dry heat, ethylene oxide, plasma, gamma, and x-ray. It comes in various colors, including beige, black, blue, red, green, and yellow. The material is characterized by features such as ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance. Its main applications include equipment and parts, especially connectors.
Mitsubishi Chemical Group Corporation
Nylatron® 703 XL PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Plates
Features:
Bearing Grade, Wear Resistant, High Strength, High Loading Absorption Capability, Excellent Toughness, Low Thermal Expansion, High Performance, Good Electrical Properties, Good Mechanical Properties
Density:
1110.0 - 1110.0 kg/m³
Tensile Modulus:
2750.0 - 2750.0 MPa
Nylatron® 703 XL, a unique, ultra-high performance bearing grade made from Polyamide PA6. This material offers exceptional wear resistance, even better than Nylatron® NSM, while also providing superior load bearing capabilities and a near zero level of stick-slip.Features:Ultra-high performance bearing gradeBetter wear resistance than Nylatron® NSMSuperior load bearing capabilitiesNear zero level of stick-slipBenefits:Provides an extraordinary amount of motion control for high-precision applicationsElimination of stick-slip improves performance in high-precision applicationsIdeal for wear-intensive applicationsApplications:Wear padsConveyor componentsCorner tracksPneumatic control surfacesConstruction and heavy equipment marketsMade from a high performance cast nylon 6, Nylatron 703 XL is suitable for heavy-duty, high-load and high-speed applications where the highest level of wear resistance and load-bearing capabilities are required. It offers improved performance and longer service life than other materials. It is a cost-effective solution for construction, heavy equipment and other industrial markets that demand high-performance and durability.
Mitsubishi Chemical Group Corporation
Ketron® LSG PEEK-CLASSIX™ White
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Biocompatible, Good Mechanical Properties, Gamma Sterilizable, Life Science Grade, Plasma Gas Sterilizable, Excellent Mechanical Strength, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Excellent Sterilization Resistance, Chemical Resistant, High Stiffness, X-Ray Sterilizable
Density:
1390.0 - 1390.0 kg/m³
Tensile Modulus:
4600.0 - 4600.0 MPa
Color:
White
Ketron® LSG PEEK-CLASSIX™ White is a product available in the form of plates and rods, designed for dental applications. This material is characterized by features like ethylene oxide sterilizability, biocompatibility, excellent sterilization resistance, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, good mechanical properties, steam sterilizability, heat sterilizability, plasma gas sterilizability, and chemical resistance. It comes in the color white, making it suitable for dental applications.
Mitsubishi Chemical Group Corporation
Nylatron® 101 PA66
Polymer Name:
Polyamide 66 (PA 66)
Physical Form:
Tube, Plates, Rods
Features:
Food Contact Acceptable, Excellent Stiffness, Heat Stabilized, Good Mechanical Properties, High Melting Point, Wear Resistant, High Strength, Excellent Mechanical Strength, Excellent Toughness, Good Electrical Properties
Density:
1140.0 - 1140.0 kg/m³
Tensile Modulus:
3550.0 - 3550.0 MPa
Nylatron® 101 Polyamide PA66 and Ertalon® 66 SA Polyamide PA66 - the ultimate solution for applications that require a combination of strength and toughness. These unmodified shapes are characterized by their superior mechanical strength, stiffness, and wear resistance, making them ideal for a wide range of industrial applications.Features:High mechanical strength, stiffness, and hardnessGood fatigue resistance, sliding properties and machinabilityHigh mechanical damping abilityExcellent wear resistanceGood electrical insulating propertiesGood resistance to high energy radiation (gamma and X-rays)Benefits:With Nylatron® 101 PA66 and Ertalon® 66 SA PA66, you can be sure that your components will withstand even the most demanding of conditions.The superior strength and toughness of these materials ensures that they can handle heavy loads and high-stress applications with ease.The excellent wear resistance and sliding properties of these materials make them ideal for use in gears, bearings, bushings, and other moving parts.Their good electrical insulating properties and resistance to high energy radiation make them suitable for use in electrical equipment and machinery.Applications:Screw machined electrical insulatorsBushings, bearings, gears, roller wheels, star wheels, and sealsFood processing and packaging industry (FDA and EU food contact compliant composition)Suitable for machining on automatic lathes
Mitsubishi Chemical Group Corporation
Sultron® PSU
Polymer Name:
Polysulfone (PSU)
Physical Form:
Plates
Features:
Steam Resistant, Good Mechanical Properties, Salt Water/Spray Resistant, Acid Resistant, High Tolerance, Odorless, Radiation Resistant, Detergent Resistant, Good Electrical Properties, Chemical Resistant, Translucent, Hot Water Resistant, High Temperature Resistance, Good Thermal Stability
Density:
1240.0 - 1240.0 kg/m³
Tensile Modulus:
2850.0 - 2850.0 MPa
Color:
Yellow
Sultron® Polysulfone PSU is a versatile and reliable thermoplastic material that offers a combination of excellent mechanical, thermal, and electrical properties. With its ability to withstand high temperatures and resist a wide range of chemicals, Sultron® PSU is the ideal solution for applications that demand the highest level of performance and durability. Features: Translucent material with excellent mechanical, thermal, and electrical properties Often replaces polycarbonate in applications requiring higher temperature resistance and improved chemical resistance Outstanding radiation stability and resistance to acidic and salt solutions, detergents, hot water, and steam Benefits: Broad temperature range capability makes Sultron® PSU suitable for a wide range of applications Good thermal and electrical insulation characteristics ensure consistent performance in demanding environments Hydrolysis resistant and radiation stable, making it a reliable choice for analytical instrumentation, medical devices, and semiconductor process equipment components Applications: Analytical instrumentation Medical devices Semiconductor process equipment components Any application that demands high temperature resistance and chemical resistance.
Mitsubishi Chemical Group Corporation
TIVAR® Sterra™ UHMW-PE
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Color:
Green
Physical Form:
Plates
TIVAR® Sterra™ UHMW-PE shapes are produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as construction and heavy equipment, agriculture and grain handling, bulk material and parcel handling, automotive, and transportation. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ UHMW-PE is often a favored solution for wear and outrigger pads, strips, rails, and guides, rollers, conveyors, chutes, hoppers, impact plates, and asphalt equipment components. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Fluorosint® MT-01 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Plates, Rods
Features:
High Temperature Strength, Good Mechanical Properties, Good Stability, High Strength, High Tolerance, Anti-Wear Properties, Odorless, High Performance, High Stiffness
Density:
2270.0 - 2270.0 kg/m³
Tensile Modulus:
1900.0 - 1900.0 MPa
Color:
Black
Fluorosint® MT-01 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added strength, stiffness and stability. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:High strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:High-performance seat, seal and wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® MT-01 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.
Mitsubishi Chemical Group Corporation
Ketron® GF30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Creep Resistant, Corrosion Resistant, Good Stability, High Strength, High Tolerance, Odorless, Dimensional Stability, Chemical Resistant, High Stiffness, High Flexural Modulus
Density:
1510.0 - 1510.0 kg/m³
Tensile Modulus:
7.0 - 7.0 MPa
Color:
Black
Ketron® GF30 Polyetheretherketone PEEK, a 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This material is designed for applications where high strength, stiffness, and stability are needed, especially at high temperatures. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F / 150°C Benefits: Offers improved strength, stiffness, and stability in high temperature applications Low expansion rate and high flexural modulus make it suitable for structural applications Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions, especially at high temperatures. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® GF30 PEEK is the ideal solution.
Mitsubishi Chemical Group Corporation
Ketron® LSG CA30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Creep Resistant, Heat Resistance, Biocompatible, Gamma Sterilizable, Wear Resistant, Life Science Grade, Plasma Gas Sterilizable, Excellent Mechanical Strength, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Dimensional Stability, Chemical Resistant, High Stiffness, X-Ray Sterilizable
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
9200.0 - 9200.0 MPa
Color:
Black
Ketron® LSG CA30 PEEK is a product available in the form of plates and rods, and possesses an array of beneficial features including ethylene oxide sterilizability, biocompatibility, X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, wear resistance, plasma gas sterilizability, dimensional stability, chemical resistance, and creep resistance. It comes in a sleek black color and is well-suited for applications in appliances and electronics. Potential uses include nailing target devices, grips, adapters, and washers.
Mitsubishi Chemical Group Corporation
Proteus® LSG HS PP
Polymer Name:
Polypropylene (unspecified)
Physical Form:
Plates, Rods
Features:
High Purity, Heat Stabilized, Biocompatible, Gamma Sterilizable, Life Science Grade, Plasma Gas Sterilizable, High Heat Deflection Temperature, Steam Sterilizable, Ethylene Oxide Sterilizable, Dimensional Stability, Autoclave Sterilizable, Good Solvent Resistance, X-Ray Sterilizable
Density:
920.0 - 920.0 kg/m³
Tensile Modulus:
1800.0 - 1800.0 MPa
Color:
White, Black
Proteus® LSG HS PP is a product available in the form of plates and rods, making it suitable for various applications. This material possesses several key features, including X-ray sterilizability, autoclave sterilizability, life science grade, gamma sterilizability, good solvent resistance, heat stabilization, high heat deflection temperature, high purity, steam sterilizability, plasma gas sterilizability, dimensional stability, ethylene oxide sterilizability, and biocompatibility. It comes in the colors white and black and finds applications in medical devices and assemblies, as well as surgical instruments and trays in the medical field.
Mitsubishi Chemical Group Corporation
Ketron® LSG FG PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Heat Resistance, Biocompatible, Gamma Sterilizable, Life Science Grade, Plasma Gas Sterilizable, Excellent Mechanical Strength, Steam Sterilizable, Ethylene Oxide Sterilizable, Heat Sterilizable, Chemical Resistant, High Stiffness, X-Ray Sterilizable
Density:
1310.0 - 1310.0 kg/m³
Tensile Modulus:
4300.0 - 4300.0 MPa
Color:
Black, Beige
Ketron® LSG FG PEEK is a product available in the form of plates and rods and boasts a range of features including X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance, ethylene oxide sterilizability, and biocompatibility. It is offered in both beige and black colors and is suitable for applications in equipment and parts, particularly connectors.
Mitsubishi Chemical Group Corporation
Semitron® MP-370
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates
Features:
Good Stability, Low Moisture Absorption, High Strength, High Tolerance, Odorless, Excellent Toughness, High Performance, Good Machinability, Dimensional Stability, Good Thermal Stability
Density:
1650.0 - 1650.0 kg/m³
Tensile Modulus:
4450.0 - 4450.0 MPa
Color:
Grey
Semitron® MP 370 shapes exhibit excellent moisture absorption and thermal resistance, while also maintaining outstanding strength and dimensional stability. As a result, this grade is often selected for test socket applications where precision machining is critical, and complex geometries are prevalent.Features:Excellent moisture absorptionHigh thermal resistanceOutstanding strength and dimensional stabilityExcellent machinabilityBenefits:Allows for precision machining and complex geometries in test socket applicationsProvides greater strength and dimensional stability compared to unfilled PEEK materialsLow internal stresses and no "soft center" issues associated with injection molded blanksApplications:Test sockets for the semiconductor manufacturing industryPrecision machining and complex geometries in various industries where high thermal resistance and moisture absorption are required.
Mitsubishi Chemical Group Corporation
Duratron® T4203 PAI
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Tube, Plates, Rods
Features:
High Temperature Resistance, Good Impact Strength, Good Abrasion Resistance, Creep Resistant, Low Thermal Expansion, Good Compressive Strength, Wear Resistant, High Strength, High Tolerance, High Loading Absorption Capability, High Elongation, Odorless, Excellent Toughness, Electrically Insulating, Good Machinability, Dimensional Stability
Density:
1410.0 - 1410.0 kg/m³
Tensile Modulus:
4200.0 - 4200.0 MPa
Color:
Brown
Duratron® T4203 PAI is a polyamide-imide material that offers exceptional strength and durability in high-tech equipment and structural applications. With features such as high impact strength, high elongation, and dimensional stability, it is a reliable choice for precision parts and components that require high performance in extreme conditions.Features:High impact strengthHigh elongationDimensional stabilityHigh temperature resistanceExceptional machinabilityBenefits:Able to withstand extreme conditions and loadsIdeal for precision parts and components in high-tech equipmentSuitable for structural applications such as linkages and seal ringsExcellent choice for wear applications involving impact loading and abrasive wearApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearPrecision parts in high-tech equipment
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ 1000 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Color:
Grey
Physical Form:
Rods, Bars, Plates
Ketron® Sterra™ 1000 PEEK is an unfilled, general-purpose grade known for its exceptional elongation and toughness. It is ideal for instrument and seal components, where ductility and inertness are crucial. Ketron® Sterra™ 1000 PEEK portfolio, featuring recycled content for a reduced carbon footprint compared to non-recycled materials.
Mitsubishi Chemical Group Corporation
TIVAR® Sterra™ DrySlide UHMW-PE
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Additives Included:
Lubricant (Unspecified)
Color:
Black
Physical Form:
Plates
TIVAR® Sterra™ DrySlide UHMW-PE is an internally lubricated product. This lubricant is built into the PE-UHMW matrix with a higher molecular weight. It offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW. The additives used also make this material static dissipative and considerably improves UV-resistance. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Ketron® CM CA30 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Plates, Rods
Features:
Low Thermal Expansion, Good Heat Dissipation, High Impact Resistance, Good Compressive Strength, Corrosion Resistant, Wear Resistant, High Strength, High Tolerance, Odorless, Chemical Resistant, High Stiffness, Good Thermal Conductivity, Abrasion Resistant
Density:
1420.0 - 1420.0 kg/m³
Tensile Modulus:
9648.8 - 9648.8 MPa
Color:
Black
Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.
Mitsubishi Chemical Group Corporation
Ketron® Sterra™ HPV PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Additives Included:
Lubricant (PTFE), Lubricant (Graphite)
Fillers Included:
Carbon Fiber
Color:
Black
Physical Form:
Plates
Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Sultron® LSG PSU
Polymer Name:
Polysulfone (PSU)
Physical Form:
Plates, Rods
Features:
Excellent Transparency Properties, Biocompatible, Good Mechanical Properties, Gamma Sterilizable, Hydrolysis Resistant, Life Science Grade, Plasma Gas Sterilizable, Steam Sterilizable, Ethylene Oxide Sterilizable, Excellent Thermal Properties, Heat Sterilizable, Good Electrical Properties, Excellent Sterilization Resistance, X-Ray Sterilizable
Density:
1240.0 - 1240.0 kg/m³
Tensile Modulus:
2850.0 - 2850.0 MPa
Color:
Yellow, Translucent
Sultron® LSG PSU offers a variety of features that make it a suitable material for medical devices and assemblies. It exhibits excellent sterilization resistance, X-ray sterilizability, life science grade, excellent transparency properties, gamma sterilizability, good mechanical properties, steam sterilizability, heat sterilizability, plasma gas sterilizability, excellent thermal properties, good electrical properties, ethylene oxide sterilizability, biocompatibility, and hydrolysis resistance. It is a product available in yellow and translucent colors and can be found in the physical forms of plates and rods.
Mitsubishi Chemical Group Corporation
Semitron® CMP XL20
Polymer Name:
Polyamide-imide (PAI)
Physical Form:
Rods, Tube, Plates
Features:
High Stiffness, Wear Resistant, High Strength, High Tolerance, Cost Effective, Odorless
Density:
1400.0 - 1400.0 kg/m³
Tensile Modulus:
3962.9 - 3962.9 MPa
Color:
Green
Semitron® CMP XL20 Polyamideimide PAI shapes were specifically developed for CMP ring applications in the semiconductor and electronics industry, due to their excellent long wear life in CMP slurries. In addition to these characteristics, Semitron® CMP XL20 PAI components display high strength and stiffness, and outstanding wear resistance over a broad range of temperatures, making this grade the ideal solution for dynamic applications in process environments.Features:Specifically developed for CMP ring applications in the semiconductor and electronics industryExcellent long wear life in CMP slurriesHigh strength and stiffnessOutstanding wear resistance over a broad range of temperaturesBenefits:Ideal solution for dynamic applications in process environmentsSignificantly lower cost per waferOutperforms PPS up to 20x in most processesPromotes fewer edge defects and better uniformityApplications:CMP ring applications in the semiconductor and electronics industryCan be used in clamp rings, trench rings, screws, pins, and shower headsSuitable for use in centering pins, focus rings, insulators, vacuum pads, and wafer guides.
Mitsubishi Chemical Group Corporation
Techtron® 1000 PPS
Polymer Name:
Polyphenylene Sulfide (PPS)
Physical Form:
Rods, Plates
Features:
Anti-Wear Properties, Low Thermal Expansion, Good Machinability, Dimensional Stability, Corrosion Resistant, Low Moisture Absorption, High Tolerance
Density:
1350.0 - 1350.0 kg/m³
Tensile Modulus:
4000.0 - 4000.0 MPa
Color:
Natural
Techtron® 1000 PPS is a high-performance polymer known for its excellent dimensional stability, chemical resistance, and easy machinability. It is a unfilled grade of Polyphenylene Sulfide (PPS) and is ideal for a wide range of applications where precision and durability are required.Key features:Outstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion make it easy to maintain tight tolerances.Easy machinability: this material can be machined to close tolerances, making it suitable for precise components.Corrosion resistance: due to its chemical resistance, this material is ideal for use in corrosive environments.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals and moistureEnhanced precision and dimensional stabilityImproved machinability and tight tolerance controlApplications:Structural parts in corrosive environments such as chemical processing and oil and gas industry.Precision components and machine parts that require dimensional stability, wear and chemical resistanceElectrical components, as it has good electrical insulation and dielectric properties.Automotive and aerospace components as it can withstand high temperatures.Techtron® 1000 is a versatile and reliable material that can help improve the performance and longevity of your products, it's available in a range of shapes and sizes, making it easy to incorporate into your designs.
Mitsubishi Chemical Group Corporation
Ertalon® 6PLA PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Rods, Tube, Plates
Features:
Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability, X-Ray Shielding, Heat Aging Resistant, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Food Contact Acceptable, Creep Resistant, Excellent Stiffness, Wear Resistant, High Strength, Excellent Mechanical Strength
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3600.0 - 3600.0 MPa
Ertalon® 6PLA / Nylatron® MC 907 is a high-performance, unmodified cast nylon 6 grade that offers exceptional strength, hardness, creep resistance, and heat aging properties. This grade is also FDA and EU food contact compliant, making it ideal for use in the food processing and packaging industry.Features:High mechanical strength, stiffness, and hardnessGood resistance to creep, wear, fatigue, and heat agingGood sliding properties and machinabilityElectrical insulation and resistance to gamma and x-ray radiationBenefits:Can withstand high loads and extreme temperaturesProvides reliable performance in harsh environmentsEasy to machine for custom applicationsSafe for use in food contact applicationsApplications:Gears, rollers, wheels, bearings, and conveyor wear parts in the food processing and packaging industryOther applications that require high strength and hardness, such as sleeve and slide bearings, wear pads, rollers, pulleys, scrapers, gear wheels, sprockets, star wheels, and insulators.
Mitsubishi Chemical Group Corporation
Techtron® HPV PPS
Polymer Name:
Polyphenylene Sulfide (PPS)
Physical Form:
Plates, Rods
Features:
Food Contact Acceptable, Lubricated, Low Flammability, Low Coefficient of Friction, Wear Resistant, Excellent Dielectric Properties, High Tolerance, Odorless, Excellent Hydrolysis Resistance, Electrically Insulating, Dimensional Stability, Chemical Resistant
Density:
1420.0 - 1420.0 kg/m³
Tensile Modulus:
4000.0 - 4000.0 MPa
Color:
Blue
Techtron® HPV PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added wear resistance and strength of glass fiber reinforcement and internal lubrication. This compression-molded material is designed to excel in demanding environments and applications where wear resistance and dimensional stability are required.Key features:Superior wear resistance: internally lubricated and glass fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding chemical and hydrolysis resistance: suitable for use in harsh environments and chemicalsExcellent dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesGreat electrical insulating and dielectric propertiesLow coefficient of friction and inherent low flammabilityGlass fiber reinforced: increased strength and stiffness, ideal for wear componentsFood grade availableBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion, and wearEnhanced precision and dimensional stabilityImproved electrical insulation and dielectric propertiesReduced friction and lower flammability riskMore cost-effective than advanced engineering plastics for certain applicationsApplications:Wear components such as bushings and bearings, CIP wash down parts, and pump, valve, and compressor applications in the aerospace, food processing, and oil and gas industries.Industrial equipment such as industrial drying and food processing ovens (bearings, rollers, etc.)Chemical process equipment (pump-, valve & compressor components)Electrical insulating systemsCost-effective alternative to advanced engineering plastics in certain applicationsTechtron® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, including food grade, making it easy to incorporate into your designs.
Mitsubishi Chemical Group Corporation
Ertalon® 4.6 PA4.6
Polymer Name:
Polyamide 46 (PA 46)
Physical Form:
Plates, Rods
Features:
X-Ray Shielding, Heat Aging Resistant, Good Sliding Properties, Good Damping, High Hardness, High Fatigue Resistance, Creep Resistant, Excellent Stiffness, Wear Resistant, Excellent Mechanical Strength, Radiation Resistant, Excellent Toughness, Electrically Insulating, Good Machinability
Density:
1190.0 - 1190.0 kg/m³
Tensile Modulus:
3400.0 - 3400.0 MPa
Ertalon® 4.6 and Nylatron® 4.6 are advanced polyamide PA46 shapes that are known for their superior heat aging resistance and ability to retain outstanding stiffness and creep resistance over a wide range of temperatures.Features:Superior heat aging resistanceRetains outstanding stiffness and creep resistance at high temperaturesOutperforms PA6, PA66, POM, and PET in extreme environmentsBenefits:Ideal for use in extreme environments where traditional materials fall shortCan withstand high temperatures without losing mechanical propertiesSuitable for a wide range of applications, including bushings, bearings, gears, pulleys, sheaves, wear pads, valve seats, seals, and conveyor wear componentsApplications:Bushings and bearings in extreme temperature environmentsGears and pulleys in high-heat industrial settingsWear pads and valve seats in harsh chemical environmentsSeals and conveyor wear components in high-temperature applications.
Mitsubishi Chemical Group Corporation
Acetron® C Sterra™ POM-C
Polymer Name:
Polyacetal Copolymer (POM)
Color:
Black
Physical Form:
Rods, Bars
Acetron® C Sterra™ POM-C is a general-purpose copolymer acetal grade that is often favored for its porosity-free nature. Acetron® C Sterra™ POM-C shapes offer low moisture and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.
Mitsubishi Chemical Group Corporation
Fluorosint® 207 PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Plates, Rods
Features:
Low Permeability, Food Contact Acceptable, Creep Resistant, Low Coefficient of Friction, High Tolerance, Anti-Wear Properties, Odorless, Excellent Hydrolysis Resistance, Dimensional Stability, Chemical Resistant, Good Sliding Properties
Density:
2300.0 - 2300.0 kg/m³
Tensile Modulus:
1450.0 - 1450.0 MPa
Color:
White
Fluorosint® 207 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added food contact compliance and unique combination of dimensional stability and creep resistance. This material is designed to excel in demanding applications where high performance, reliability and food contact compliance are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceFood Contact Compliant (FDA): safe for use in food and pharmaceutical applicationsHigh dimensional stability and creep resistance: ensures consistent performance over timePTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:Low coefficient of friction, making it ideal for aggressive service bearing and bushing applicationsFood Contact Compliance (FDA), allowing for use in food and pharmaceutical industriesHigh dimensional stability and creep resistance, ensuring consistent performance over timeEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Food and pharmaceutical applications where FDA compliance is requiredLow friction bearing and bushing applications in aggressive service environmentsLower pressure seats and seals, where virgin PTFE failsChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires low friction and dimensional stability in harsh environments.Fluorosint® 207 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added food contact compliance and unique properties, Fluorosint® 207 is an excellent choice for applications in food, pharmaceutical and chemical processing industries.
Mitsubishi Chemical Group Corporation
Ketron® 1000 PEEK
Polymer Name:
Polyetheretherketone (PEEK)
Physical Form:
Tube, Plates, Rods
Features:
Ductile, General Purpose, Steam Resistant, Excellent Aesthetics, Wear Resistant, High Tolerance, High Elongation, Excellent Toughness, High Performance, Chemical Resistant
Density:
1310.0 - 1310.0 kg/m³
Tensile Modulus:
4300.0 - 4300.0 MPa
Color:
Tan, Black
Ketron® 1000 PEEK is a high-performance polymer that offers excellent mechanical properties and chemical resistance. It is widely used in a variety of applications where high strength and stiffness, low friction, and excellent dimensional stability are required. This material is ideal for instrument and seal components, where its high elongation and toughness make it an excellent choice. Its non-toxic and biocompatible properties make it suitable for use in medical and food processing applications. Key features: High strength and stiffness Low friction Excellent dimensional stability High elongation and toughness EU 10/2011 and FDA compliant Benefits: Improved performance and durability of components Increased resistance to chemicals and high temperatures Enhanced biocompatibility and safety in medical and food processing applications Greater design flexibility and compatibility with a wide range of applications and industries Application: Structural parts: Ketron® PEEK is often used for structural components that are subject to high temperatures and chemical exposure. For example, it is commonly used for vacuum wand handles in semiconductor manufacturing. Bushings, bearings, seals, and back-up rings: Ketron® PEEK is an excellent choice for components that are subject to wear and tear. Its low coefficient of friction and high strength make it suitable for use in a wide range of applications, from aircraft to oil field drilling. Ketron® 1000 PEEK is available in a range of shapes and sizes, making it easy to incorporate into your designs. It is a versatile and reliable material that can help improve the performance and longevity of your products.
Mitsubishi Chemical Group Corporation
Duratron® LSG PEI
Polymer Name:
Polyether Imide (PEI)
Physical Form:
Plates, Rods
Features:
Food Contact Acceptable, Biocompatible, Good Mechanical Properties, Gamma Sterilizable, Hydrolysis Resistant, Life Science Grade, Plasma Gas Sterilizable, Steam Sterilizable, Ethylene Oxide Sterilizable, Excellent Thermal Properties, High Performance, Heat Sterilizable, Good Electrical Properties, Chemical Resistant, X-Ray Sterilizable
Density:
1280.0 - 1280.0 kg/m³
Tensile Modulus:
3500.0 - 3500.0 MPa
Color:
Translucent, Amber, Black, Blue
Duratron® LSG PEI is a product available in the form of plates and rods and offers a range of valuable features such as good electrical properties, ethylene oxide sterilizability, biocompatibility, hydrolysis resistance, X-ray sterilizability, life science grade, gamma sterilizability, good mechanical properties, food contact acceptability, steam sterilizability, high performance, heat sterilizability, plasma gas sterilizability, excellent thermal properties, and chemical resistance. It comes in a variety of colors including black, translucent, blue, and amber. This versatile material is suitable for a wide range of applications, including implants and prosthetics, medical devices and assemblies, and food and beverage packaging.
Mitsubishi Chemical Group Corporation
Fluorosint® HPV PTFE
Polymer Name:
Polytetrafluoroethylene (PTFE)
Physical Form:
Rods, Plates
Features:
High Performance, Bearing Grade, High Viscosity, High Tolerance, High Loading Absorption Capability, Food Contact Acceptable, Anti-Wear Properties, Odorless
Density:
2060.0 - 2060.0 kg/m³
Tensile Modulus:
1200.0 - 1200.0 MPa
Color:
Tan
Fluorosint® HPV is an advanced polymer material that combines the excellent chemical resistance and low friction properties of PTFE (polytetrafluoroethylene) with added strength, stiffness, and wear resistance, making it ideal for high-performance bearing applications.Key features:High PV (pressure-velocity) and low “k” or wear factor: Optimized for high performance and durability in bearing applicationsFDA Compliant: Suitable for use in food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speedsFDA Compliant : Suitable for applications where food contact compliance may be requiredBenefits:High performance and durability in bearing applications: Enables equipment to run efficiently and safelyFDA Compliance: Provides new design options for food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speeds, making it ideal for demanding applicationsImproved reliability and safety in critical applications.Application:Bearing applications where high PV and low “k” or wear factor are neededFood processing and pharmaceutical applications where FDA compliance is requiredAny application that requires high performance and durability in harsh environmentsFluorosint® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's FDA compliant, making it suitable for food processing and pharmaceutical applications, it's ideal for high-performance bearing applications and it's available in custom shapes for efficient production. With its excellent chemical resistance, low friction, and high performance in harsh environments, Fluorosint® HPV is an excellent choice for equipment manufacturers looking to improve the performance and safety of their products.
Mitsubishi Chemical Group Corporation
Nylatron® LIG PA6
Polymer Name:
Polyamide 6 (PA 6)
Physical Form:
Tube, Plates, Rods
Features:
Low Coefficient of Friction, High Strength, Self Lubricating, Lubricated, Excellent Toughness, Good Electrical Properties, Good Mechanical Properties
Density:
1150.0 - 1150.0 kg/m³
Tensile Modulus:
3446.0 - 3446.0 MPa
Nylatron® LIG Polyamide PA6, a self-lubricating, oil-filled nylon that is the perfect solution for industrial applications in the conveying and processing industries. With its unique combination of features, this material offers a range of benefits for a variety of applications.Features:Self-lubricating, oil-filled nylonHigher toughness and limiting pressure velocity when compared to unfilled gradesLow coefficient of frictionBenefits:Enhances load bearing performance and reduces the coefficient of frictionProvides a solution for industrial applications in the conveying and processing industriesApplications:Ideal for use in bushings, bearings, roller wheels, and valve seats and sealsSuitable for use in a wide range of industrial applications where self-lubricating materials are required.
Show
36
of 1,838 results
Go to page
1
2
3
4
5
6
7
8
9
10