Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins
922 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Crosslink Technology Inc.
Crosslink Technologies CLR1186
Applications:
Sports & Recreation
Product Families:
Epoxies, Thermoset Resins
Chemical Family:
Epoxy & Epoxy Derivatives
Polymer Name:
Epoxy Resins & Compounds
CLR1186 is a low viscosity two component epoxy system. The product cures at low temperatures down to 10c. The product is suitable for laminating, adhesive, and chemical resistant applications. The product has good hiding strength when applied in a thin film.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 727Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Foundry Dressings, Industrial Castings
Density:
1650.0 - 1750.0 kg/m³
Ebalta GM 727 is a well castable two components polyurethane casting resin, curing slowly at room temperature. This casting resin is particularly suitable for solid casting of dimensionally accurate large-volume models with high temperature resistance. Due to low mixing viscosity of GM 727 you can add 70% filler F-B and about 50% plastic granules to reduce shrinkage to approx. 0.05%.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 965 70Comp. A+B
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Mold Making
Density:
1170.0 - 1230.0 kg/m³
Tensile Strength:
5.5 - 6.5 MPa
This product is a polyurethane system. No load on GM 965-70 before 24 hrs. curing at room temperature (23°C) If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product.
Swancor
Swancor 2596
Polymer Name:
Epoxy Resins & Compounds
Chemical Family:
Epoxy & Epoxy Derivatives
SWANCOR 2596 is a hot-melt epoxy resin, without Diuron and volatile ingredients in the formula. It is special-purpose high-rigidity and toughening product, which has better toughening properties than 2556 with light weight, excellent mechanical strength, heat resistance and corrosion resistance, etc.
Matrix Polymers
Revolve XL400
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Rotational Molding
End Uses:
Fuel Tanks, Industrial Tanks
Density:
945.0 - 945.0 kg/m³
Revolve XL400 is a rotational molding crosslinkable polyethylene grade which combines outstanding performance with all the benefits of a high MFI resin. This grade is especially suitable for demanding applications such as diesel tanks and IBCs due to its superb chemical resistance. It is advisable to consult the MSDS before use.
Hapco Inc.
Ultralloy™ 3310-28
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting, Vacuum Casting
End Uses:
Prototyping, Agricultural Applications, Housings, Toys
The ULTRALLOY series of liquid molding compounds are tough, fast cycling, low cost, and easy to use. ULTRALLOY is designed to be used with Liquid Molding, open casting, pressure casting, or vacuum casting processes. ULTRALLOY can be used with silicone, epoxy, urethane, polyester, or aluminum molds. Low cost molds and fast cycle times are two key attributes of ULTRALLOY.ULTRALLOY is available in several series. Each series has different products with different physical properties. Properties such as elongation, tensile strength, and modulus of elasticity can be selected to mold parts with the correct physical characteristics. Choose the ULTRALLOY material with the exact properties you need, or that are required to meet specifications.ULTRALLOY is available in opaque white, clear/transparent, and in fire retardant (UL 94V-0) versions. Custom coloring can be achieved by pigmenting ULTRALLOY with Hapco's easy to mix color dispersions. Both opaque and translucent color dispersions are available.ULTRALLOY can be molded in inexpensive molds, reducing total part cost, for short run programs.ULTRALLOY is made for prototypes and short runs of plastic parts. ULTRALLOY fills the need for low cost, high performance parts, in volumes less than 10,000 parts per year.ULTRALLOY 3300 SERIESA series of flame retardant, (UL 94V-0) high strength, systems with excellent physical properties. This series can be pressure or vacuum cast. Underwriter Labs Flame Retardant 94V-0 @ 2.5 mm thickness. This series is available in a 2, 4, 14, and 28 minute gel time.
Telene
Telene® 1810 A/B
Polymer Name:
Polydicyclopentadiene (PDCPD)
Processing Methods:
Injection Molding, Reaction Injection Molding (RIM)
End Uses:
Fenders, Automotive Under The Hood, Engine Covers, Automotive Bumpers, Automotive Exterior Parts
Telene® 1810 A/B technology utilizes ring opening metathesis polymerization (ROMP). Formulations are based on dicyclopentadiene (DCPD) and engineered to produce polydicyclopentadiene polymer (PDCPD), well-known for its robust mechanical properties at low temperatures, its low water absorption, and its radio transparency.This system has been designed to produce machine cast parts.
BCC Products
BCC Resins™ BC 7062H
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Molds/Dies/Tools, Modeling Material, Prototyping
BC 7062 are aluminum filled, low viscosity epoxy mass casting resins. These room temperature cure systems allow the user choice thicknesses of 1/8 inch to a maximum of 6 inches without foaming or yielding excessive shrinkage. Casting thicknesses may be increased by incorporating aluminum needles, puffs or granules. BC 7062, when properly cured, provides nearly perfect reproduction, resulting in a dimensionally stable, hard, tough surface. For use in constructing duplicate models, prototypes, patterns, facing dies, etc.
Sino Polymer
Sino Polymer MFE 711
Polymer Name:
Epoxy Resins & Compounds
Cure Method:
Chemical Cure
Processing Methods:
Pultrusion, Hand Lay-Up, Spray Lay-Up, Filament Winding
End Uses:
Tanks, Food Packaging, Pipes
Sino Polymer MFE 711, formerly known as MFE-11, is a premium standard Bisphenol-A type epoxy vinyl ester resin. It provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.
DIC Corporation
Pandex™ TP-2245
Polymer Name:
Polyurethane (unspecified)
PANDEX, WALL-LITE series are single-pack and twin-pack polyurethane resins developed for waterproofing of rooftops and walls and adhesion of rubber chips. The series characteristically excel in workability and hardening effects.
Smooth On
Smooth-Cast™ ONYX™ SLOW
Polymer Name:
Polyurethane (unspecified)
End Uses:
Semiconductor Applications, Prototyping, Encapsulant
Density:
1090.0 - 1090.0 kg/m³
Tensile Strength:
52.7774 - 52.7774 MPa
Smooth-Cast™ ONYX™ SLOW is a mercury-free urethane resin that cures at room temperature to a deep black, solid plastic. ONYX™ resins offer the convenience of a 1A:1B by volume mix ratio and have very low viscosities, so they are easy to mix and pour. ONYX™ resins have an ultimate Shore hardness of 80D and offer higher physical properties and higher heat resistance vs. other general purpose resins. ONYX™ resins are available in 2 speeds. ONYX™ FAST resin has a pot life of 2.5 minutes and a cure time of 10-15 minutes, while ONYX™ SLOW has a pot life of 5 minutes and a cure time of 90 minutes.
Kemrock Industries and Exports
Kemrock Industries and Exports KPR 6115
Polymer Name:
Thermoset Polyester
Chemical Family:
Unsaturated Polyester (UPE), Polyesters
KPR 6115 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6115 is used in gel coats.
Cridel
Cridel ER120/EH435
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Lamination
End Uses:
Tooling
Cridel ER120/EH435 is an epoxy based laminating resin tooling\pattern making.
Orgi Chemie
OCPOL 701
End Uses:
Tanks
Cure Method:
Chemical Cure
Density:
1100.0 - 1110.0 kg/m³
Ocpol 701 is a clear Pre-Accelerated orthophthalic unsaturated polyester resin. It is highly water resistance. Due to its outstanding stability and excellent performance it is use in boats water tanks, bath tubs shower tub etc.
Arlon Electronic Materials
Arlon® 45N
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Injection Molding
End Uses:
Automotive Under The Hood, Laminates, Electrical/Electronic Applications, Computer Components
Arlon 45N is a tough, high Tg (175°C by DSC) multifunctional epoxy laminate and prepreg system designed for use in a variety of higher layer count MLB's. Processeable using conventional FR-4 conditions, 45N is supplied to meet the requirements of IPC-4101/24.
MARTE SpA
Ares® P114
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Ares P114 is medium reactivity orthophthalic resin with high transparency, with controlled peak to avoid tension. Excellent brilliance. Available in low or high viscosity. It is suitable for casting, for sheets and transparent objects.
BCC Products
BCC Resins™ BC 8160
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Prototyping, Living Hinges
BC8160 is a low viscosity two-component urethane casting compound that is specifically formulated for its flexural and impact strength. It is recommended for use for the production casting of highly wear-resistant parts and prototypes. BC8160 can be used to develop thermoplastics type prototypes. This product is a safe, easy-to-handle, room temperature mixing and curing system that does not contain TDI, MDI, or MOCA. BC8160 is relatively insensitive to typical environmental moisture and will make good void-free parts without the problems that some conventional urethane systems exhibit.
Resin-SA Pty Ltd
Resin-SA Pty Ltd RES GP 005 WTA Black
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Orthophthalics, Unsaturated Polyester (UPE)
Processing Methods:
Hand Lay-Up, Hand Lay-up, Spray Lay-up, Spray Lay-Up
Resin-SA Pty Ltd RES GP 005 WTA Black is a general purpose ortho resin black pigmented hand laminating.
Sino Polymer
Sino Polymer MFE 780HT
Polymer Name:
Epoxy Resins & Compounds
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GM 708PUR 4
Polymer Name:
Polyurethane (unspecified)
End Uses:
Foundry Dressings
Density:
1170.0 - 1230.0 kg/m³
Tensile Strength:
45.0 - 55.0 MPa
GM 708 is a high-quality, almost odorless 2-components-polyurethane casting compound without any filler. The filler will only be added when mixing both components. The long potlife of more than 45 min makes it possible to cast big-volume parts. Depending on the application, different dry fillers can be used. To get optimum properties, especially low shrinkage, we recommend a high filler content.
BCC Products
BCC Resins™ BC 7062-3H
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Molds/Dies/Tools, Modeling Material, Prototyping
BC 7062 are aluminum filled, low viscosity epoxy mass casting resins. These room temperature cure systems allow the user choice thicknesses of 1/8 inch to a maximum of 6 inches without foaming or yielding excessive shrinkage. Casting thicknesses may be increased by incorporating aluminum needles, puffs or granules. BC 7062, when properly cured, provides nearly perfect reproduction, resulting in a dimensionally stable, hard, tough surface. For use in constructing duplicate models, prototypes, patterns, facing dies, etc.
BCC Products
BCC Resins™ MB1100
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Foam Processing, Machining
End Uses:
Molds/Dies/Tools, Modeling Material, Prototyping, Agricultural Applications, Automotive Applications, Aerospace Applications
MB 1100 is an Olive colored rigid closed-cell polyurethane foam tooling and modeling board. MB 1100 is low density foam of approximately 10lbs/ft³ board. Easily cut using CNC machining equipment or by hand the MB 1100 is perfectly suited for temporary master models, architectural design models, foundry patterns as well as design verification and prototype tools.
ATTIKA
ATTSHIELD 41
Polymer Name:
Vinyl Ester Resin, Epoxy Resins & Compounds
Chemical Family:
Polyesters, Epoxy Vinyl Ester, Epoxy & Epoxy Derivatives
Processing Methods:
Casting, Spray Lay-up
Density:
1140.0 - 1140.0 kg/m³
ATTSHIELD 41 is a bisphenol epoxy vinyl ester resin that resists corrosion in acidic and moderately alkaline environments. This tough, high strength resin can be used to make fiberglass reinforced laminates with excellent impact resistance, and it is ideal for winding applications that require resistance to harsh environments and thermal cycling. This resin has excellent wettability and curing properties as well.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh MG 703Z 400
Polymer Name:
Polyurethane (unspecified)
End Uses:
Modeling Material, Automotive Interior Parts, Consumer Applications, Automotive Applications, Automotive Exterior Parts
Density:
1100.0 - 1140.0 kg/m³
Tensile Strength:
35.0 - 45.0 MPa
Ebalta MG 703 / Z 400 is a 2-components polyurethane material, which is cured thermically and used for prototypes. The four mentioned formulations differ in being filled or non-filled and their mechanical properties. The B-components Z 400 (potlife 8-12 min.) and Z 460 (potlife 60-70 min.) are identical and can be mixed with each other to control the reactivity, e.g. potlife. These combinations of Z 400 and Z 460 comp. B can be made any way as long as the totally required quantity of comp. B is observed (for each system).
Hapco Inc.
Di-Pak™ E-4540-3
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4500 SERIESFlexible, 45, 65 and, 95 shore A hardness, potting and encapsulating systems. Flame retardant (FR), accelerated 3 minute (-3) gel time, and black or unpigmented versions are available.
DUGALAK
DEPOL Т-810
Polymer Name:
Thermoset Polyester
Processing Methods:
Hand Lay-Up, Resin Transfer Molding, Spray Lay-Up
End Uses:
Automotive Interior Trim, Air Ducts
Depol Т-810 is a non pre-accelerated unsaturated thixothropic polyester halogenated resin based on chlorendic anhydride. It is formulated for hand lay-up as well as for spray-up, RTM-technologies.
Hapco Inc.
Di-Pak™ E-4888
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4888 & E-4889High performance, flexible potting systems designed to be in constant water immersion while maintaining electrical and physical properties. DI-PAK E-4888 & E-4889 were designed to meet Naval underwater applications.
MARTE SpA
Ares® P308
Polymer Name:
Polydicyclopentadiene (PDCPD), Thermoset Polyester
Chemical Family:
Polyesters, Olefins
Ares P308 is extremely flexible resin with low styrene content and low exothermic peak.The cross-linked resin is soft and dry to the touch. It is particularly suitable for the production of abrasive cones suitable for abrading particularly fragile and delicate surfaces.
BJB Enterprises
BJB Enterprises TC-1604-AB
Polymer Name:
Epoxy Resins & Compounds
Flexural Strength:
268.89 - 268.89 MPa
TC-1604 A/B is a filled, easy to apply, laminating epoxy resin for variety of fabricating applications. Designed to be used with heavier weight fiberglass cloth (typically 8-10 oz.tooling fabric),TC-1604 can produce thick laminates without excess draining of the resin. Being a very stable system with low shrinkage.
Sino Polymer
Sino Polymer MERICAN 9709
Processing Methods:
Filament Winding, Hand Lay-Up, Pultrusion
End Uses:
Tanks, Pipes
Telene
Telene® 2650
Polymer Name:
Polydicyclopentadiene (PDCPD)
Processing Methods:
Injection Molding, Reaction Injection Molding (RIM)
End Uses:
Fenders, Automotive Under The Hood, Engine Covers, Automotive Bumpers, Automotive Exterior Parts
Telene® 2650 technology utilizes ring opening metathesis polymerization (ROMP). Formulations are based on dicyclopentadiene (DCPD) and engineered to produce polydicyclopentadiene polymer (PDCPD), well-known for its robust mechanical properties at low temperatures, its low water absorption, and its radio transparency.
Lucobit AG
Lucobit® 1233
Polymer Name:
Polyethylene Copolymer
Processing Methods:
Film Extrusion, Profile Extrusion, Injection Molding
End Uses:
Roofing Membranes, Construction Applications
Density:
960.0 - 960.0 kg/m³
Lucobit® 1233 by Lucobit AG is comprised of Crosslinkable Polyethylene and Polyethylene Copolymer. It is commonly used It is available in Granules form.
MARTE SpA
Ares® P805
Polymer Name:
Polydicyclopentadiene (PDCPD), Thermoset Polyester
Chemical Family:
Polyesters, Olefins
Ares P805 is DCPD resin with high reactivity. Low styrene content, and excellent dimensional stability. Excellent mechanical characteristics and wettability of the fillers. Ideal for fast processing cycles.
Hapco Inc.
Di-Pak™ E-4651
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Encapsulating, Potting
End Uses:
Power Cable Shields, Switches, Electrical/Electronic Applications, Battery Cases
DI-PAK E-4600 SERIESFlexible, high strength, 50 to 71 shore D hardness potting and encapsulating systems. Available in flame retardant (FR), 3 minute (-3) gel time, and in black or unpigmented.
Sumitomo Bakelite Company
Durez™ 00156
Polymer Name:
Phenol Formaldehyde (PF), Phenolic Compound
Processing Methods:
Transfer Molding, Injection Molding, Compression Molding
End Uses:
Electrical/Electronic Applications, Automotive Applications
Density:
1540.0 - 1540.0 kg/m³
Tensile Strength:
52.0 - 52.0 MPa
Durez™ 00156 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durez™ 00156 is certified as UL Flame Rated. It is available in Granules form.
Hybrid Plastics
Thermalbright™ Polyimide
Polymer Name:
Thermoset Polyimide (PI), Polyimide (PI)
Thermalbright™ Polyimide is a CP1 colorless polyimide filled with inert white pigments. Typical polyimides are orange-colored and highly absorptive when filled with white pigments, but since CP1 is intrinsically colorless the resultant material is bright white in color. Thermalbright Polyimide is useful in thermal control applications requiring low absorptivity, UV and VUV stability, and high temperature color stability. Thermalbright Polyimide exhibits high optical density and hiding, as well as high emissivity (>0.80 at 1 mil thickness).
Show
36
of 922 results
Go to page
1
2
3
4
5
6
7
8
9
10