Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Plastics
Thermoset Resins
Products in Thermoset Resins: Power/Other Tools
28 Products found in Thermoset Resins
Browse
Applications
Show All 5 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
BCC Products
BCC Resins™ HPX-850
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools
HPX-850 is a light weight, heat resistant, two component epoxy backfill system. Like BC 7020, the filler portion is pre-blended into the resin and hardener components for easier handling, thus simplifying the mixing process. HPX-850 features advantages such as low cost, long pot life, machineability, and low shrinkage. It is ideally suited for numerous applications involving mold and core constructions.HPX-850 can be removed from the mold after allowing to set 24 hours @ room temperature (75°F). Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2 hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F.
BCC Products
BCC Resins™ BC 7136-2
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools
BC 7136-2 is an aluminum filled thick section casting system with heat resistance to 300°F. May be cast to a thickness of 2 inches in non-conductive molds, 3 inches in conductive molds, and thicker sections with the addition of bulk fill. For service temperature above 150°F a post-cure is required. Does not contain VCHD or MDA. BC 7136-2 is recommended for uses such as: RTM and RIM molds, matched dies, injection and compression molds, and constructing vacuum form tools.BC 7136-2 can be removed from the mold after allowing to set 24 hours at room temperature (75°F). Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2 hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours @ 300°F.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh LH 30 resin+hardener
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Laminating
End Uses:
Molds/Dies/Tools, Mold Making, Tooling, Power/Other Tools
Flexural Strength:
62.0 - 74.0 MPa
Ebalta LH 30 / Resin+Hardener is a two components epoxy laminating resin, precuring at room temperature and, depending on postcuring, can be used till 175°C. Since this laminating resin system contains no fillers, it has got good wetting properties and makes a high glass fabric content possible. This leads to a low coefficient of thermal expansion and high strength. Together with aluminum granules, ebalta LH 28-1 is suitable for back filling of heat resistant molds and molding tools.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh LH 28 1TM
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Laminating
End Uses:
Molds/Dies/Tools, Mold Making, Tooling, Power/Other Tools
Flexural Strength:
85.0 - 105.0 MPa
Ebalta LH 28-1 / TM is a two components epoxy laminating resin, precuring at room temperature and, depending on postcuring, can be used till 175°C. Since this laminating resin system contains no fillers, it has got good wetting properties and makes a high glass fabric content possible. This leads to a low coefficient of thermal expansion and high strength. Together with aluminum granules, ebalta LH 28-1 is suitable for back filling of heat resistant molds and molding tools. At room temperature the curing takes 7 days and the material can only be used for applications till 60°C.
BCC Products
BCC Resins™ BC 8007
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Modeling Material
BCC Lik-Wood is a low viscosity, quick setting, easy to use casting material. A model or tool cast from Lik-Wood will weigh 60% less than other filled urethane systems. Within 30 minutes after mixing and pouring, Lik-Wood is ready to be carved, sanded, filed, tapped, etc.. Its amazing wood-like characteristics make it ideal for light-weight backing of laminates and/or surface coats. Perfect for fast take offs, cores, engineering changes, temporary molds, patterns, models, prototypes, and bases for die models.Handling Properties:BCC's Lik-Wood is a fast-setting, two part casting system which requires careful preparation prior to mixing parts A and B. Because Lik-Wood contains components having very low density there will be some separation at the surface of the material in its container. Using a paint shaker, jiffy mixer, or mixing spatula, re-suspension of the ingredients is easily accomplished. Precaution should be taken to prevent any moisture contamination from containers or utensils. It is recommended that the work area be well ventilated and normal cleanliness and safety rules be observed. Avoid prolonged exposure to vapors and contact with skin.Preparation of Mold Surface:Clean the surface from dust and possible presence of moisture. Apply BC 87 Parting Agent and polish to a uniform high gloss finish (usually 2-3 coats are recommended). For wood surfaces, 2-3 coats of a high quality sanding sealer is necessary. For plaster surfaces, seal with PVC sealer to ensure complete absence of moisture. For both wood and plaster surfaces, follow with 2-3 coats of 87 Parting Agent.Mixing and Pouring:Pour weighed or measured amounts of Part A & B into a separate dry container by pouring Part A into Part B. Mix with a spatula or mechanical stirrer for 30-40 seconds for quart size batches or 40-50 seconds for gallon batches while avoiding air entrapment. Immediately pour mixed resin uninterrupted from a convenient height above the mold cavity to resist air bubble entrapment. Clean your mixing tools by rinsing in an alcohol type solvent. Larger masses (2 feet or more) may be built up with successive pours. Castings may be demolded within 30-60 minutes but should be properly supported while "green". Under normal conditions, maximum hardness or cure will be achieved in 12-18 hours.
BCC Products
BCC Resins™ BC 7136
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools
BC 7136 is a gray, low toxicity, aluminum filled, epoxy casting resin. This heat resistant system may be used at room temperature without post-curing. May be cast to a thickness of ¾ inch in non-conductive molds. For use above 150°F a post-cure is required. Post cure for applications requiring temperatures above 150°F can be accomplished in an oven or in use by a gradual heat rise; 2 hours @ 150°F, plus 2 hours @ 250°F, plus 2 hours at 300°F. BC 7136 can afford consistent use to 300°F if required. This product was engineered to replace VCHD and MDA systems while retaining excellent heat resistance and low viscosity. Typical uses include constructing vacuum form tools, Injection and compression molds, RTM and RIM molds, and matched dies.
HK Research
HK Research R0075
Polymer Name:
Thermoset Polyester
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools
Density:
1080.0 - 1080.0 kg/m³
HK Research R0075 Crystal Clear Casting Resin is UV light-stabilized to help maintain its color and clarity for many years.
BCC Products
BCC Resins™ EB6200
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Thermoforming, Machining
End Uses:
Power/Other Tools, Molds/Dies/Tools, Modeling Material, Automotive Applications, Aerospace Applications
BCC Products EB6200 is a "grain-free" elevated temperature epoxy modeling material known for its superior surface finish, dimensional stability and the ability to maintain tolerances even after being subjected to temperature variations. EB6200 has excellent dimensional stability results from the low coefficient of thermal expansion and high glass transition temperature.ApplicationsMaster Models (Aerospace); Automotive Die Models; Vacuum Forming at Elevated Temperatures; Lay-Up Tools for Medium and High Temperature Curing Prepreg
BCC Products
BCC Resins™ BC 8010-2
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Modeling Material, Prototyping
BC8010-2 Metal-Kast/Slo, the result of extensive research and development is an aluminum filled, metal-like, medium setting urethane reproduction plastic. A slower version of the BC8010 Metal-Kast which allows the user longer working time for pouring larger castings or for filling closed mold cavities. BC8010-2 is ideal for the construction of low temperature vacuum form tools, prototypes, models, display parts, patterns, keller aids and bulk back fill.
BCC Products
BCC Resins™ BC 8645
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Prototyping
BCC Kwik Kast/Gray is a two component, fast setting polyurethane reproduction plastic. BC 8645 sets to a demoldable hardness within 30 minutes @ 77°F. Uses include; tracing models, core boxes, duplicating aids, patterns, prototypes, low temperature vacuum form tools, etc..
BCC Products
BCC Resins™ BC 7009-2
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Prototyping
BC 7009-2 is an iron filled, low-cost mass casting system. Recommended for use in casting a minimum of two inches and a maximum of six inches in non-conductive molds. Thicknesses to nine inches in metal or conductive-type molds can be successfully achieved as well. Ideal for stretch forms, patterns, dies, molds, duplications, prototypes, etc.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh ebatempPUR 5
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Foundry Dressings
Density:
1600.0 - 1700.0 kg/m³
Ebalta ebatemp is a high-quality two-component Polyurethane casting resin, which is very suitable for the production of vacuum thermoformed moldings. The fast casting resin, which is filled with very fine aluminum powder is very well castable and after curing very well polishable and workable. With ebatemp vacuum thermoformed moldings can be produced within 1-2 hours, these moldings show a temperature capacity of 80-90°C . Post-curing is not necessary. Material should be carefully stirred up/ shacked before use.
BCC Products
BCC Resins™ BC 8007-2
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Modeling Material
BCC Lik-Wood/Slo is a low viscosity, quick setting, easy to use casting material. A model or tool cast from Lik-Wood/Slo will weigh 60% less than other filled urethane systems. Within 1 to 3 hours after mixing and pouring, Lik-Wood/Slo is ready to be carved, sanded, filed, tapped, etc.. Its amazing wood-like characteristics make it ideal for light-weight backing of laminates and/or surface coats. Perfect for fast take offs, cores, engineering changes, temporary molds, patterns, models, prototypes, and bases for die models.Handling Properties:BCC's Lik-Wood/Slo is a quick-setting, two part casting system which requires careful preparation prior to mixing parts A and B. Because Lik-Wood/Slo contains components having very low density there will be some separation at the surface of the material in its container. Using a paint shaker, jiffy mixer, or mixing spatula, re-suspension of the ingredients is easily accomplished. Precaution should be taken to prevent any moisture contamination from containers or utensils. It is recommended that the work area be well ventilated and normal cleanliness and safety rules be observed. Avoid prolonged exposure to vapors and contact with skin.Preparation of Mold Surface:Clean the surface from dust and possible presence of moisture. Apply BC 87 Parting Agent and polish to a uniform high gloss finish (usually 2-3 coats are recommended). For wood surfaces, 2-3 coats of a high quality sanding sealer is necessary. For plaster surfaces, seal with PVC sealer to ensure complete absence of moisture. For both wood and plaster surfaces, follow with 2-3 coats of 87 Parting Agent.Mixing and Pouring:Pour weighed or measured amounts of Part A & B into a separate dry container by pouring Part A into Part B. Mix with a spatula or mechanical stirrer for 30-40 seconds for quart size batches or 40-50 seconds for gallon batches while avoiding air entrapment. Immediately pour mixed resin uninterrupted from a convenient height above the mold cavity to resist air bubble entrapment. Clean your mixing tools by rinsing in an alcohol type solvent. Larger masses (2 feet or more) may be built up with successive pours. Castings may be demolded within 30-60 minutes but should be properly supported while "green". Under normal conditions, maximum hardness or cure will be achieved in 12-18 hours.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh SG 131PUR 11
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Tooling, Power/Other Tools, Molds/Dies/Tools, Foundry Dressings, Modeling Material
Density:
1040.0 - 1080.0 kg/m³
Ebalta SG 131 / PUR 11 is a Polyurethane system. Material should be carefully stirred up/ shaked before use. Filler content and sales units are on the separate mixing table noted.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh SG 150
Polymer Name:
Acrylic Resin
End Uses:
Power/Other Tools, Molds/Dies/Tools, Tooling
Features:
Fast Curing, Thermal Shock Resistant
Density:
1650.0 - 1750.0 kg/m³
ebalta SG 150 is a four component acryl casting resin. It consists of 2 liquid components and a hardener powder. Both liquid components are filled with the 1,5 amount in ppw of special aluminum powder. The resin cures within 20-30 minutes to well heat-conducting, heat-resistant molds. The cured molds are very well workable by machines. The structure is extremely dense and the machined areas have an aluminum-like appearance. It is possible to cast any quantity, which can be mixed in one or more containers. Altercating or casting in layers is not possible. Therefore it is very important to determine the casting volume exactly in order to avoid that the mixed quantity is too small. Since the hardener powder is hygroscopic, always seal it air-tight. We recommend to sieve it before each use. Linear shrinkage as per mixture listed in the data sheet. Room temperature and starting temperature of resin components are 21°C as per measurement. For other temperatures or a different content of aluminum powder, shrinkage might also be different.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh SG 2000 SComp. A+B
Polymer Name:
Polyurethane (unspecified)
End Uses:
Tooling, Power/Other Tools, Molds/Dies/Tools, Foundry Dressings, Modeling Material, Mold Making, Industrial Castings
Density:
1080.0 - 1120.0 kg/m³
The product group ebalta SG 2000 consists of high-quality, nearly odorless two-component-Polyurethane casting resins without mixed in filler. The filler is stirred in when the components are mixed. There are different resin components available, which are processed with one hardener. The single types differ in potlife and curing time.
BCC Products
BCC Resins™ BC 4553
Polymer Name:
Thermoset Polyester
End Uses:
Power/Other Tools, Molds/Dies/Tools, Modeling Material
Cure Method:
Heat Cure
BC 4553 is designed for instant buildup and repair of plastic surfaces and models. Recommended for use on SMC and FRP parts, vacuum form molds and a variety or surfaces. When cured BC 4553 produces a hard, strong, chip resistant, tack-free surfaces.
BCC Products
BCC Resins™ BC 7009-1
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Prototyping
BC 7009-1 is an iron oxide filled, low-cost mass casting system. Thicknesses up to two inches in non-conductive molds, and four inches in conductive molds can be achieved without foaming or yielding excessive shrinkage. Ideal for stretch forms, patterns, dies, molds, duplications, prototypes, etc.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh AH 150IP 25
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Power/Other Tools, Molds/Dies/Tools, Automotive Interior Parts, Aircraft Interiors, Marine Applications, Aircraft Applications, Automotive Applications, Aerospace Applications, Automotive Exterior Parts
Flexural Strength:
130.0 - 150.0 MPa
Ebalta AH 150 / IP 25 is a very low-viscosity two-component epoxy resin with high strength and high dimensional stability. Due to its good soaking and wetting properties the resin/hardener mixture is suitable for infusion and laminating of solid parts with glass or carbon fibers. The hardeners IP 25, IP 55 as well as IP 430 can be mixed with each other thus reaching pot life between 10 min. and 430 min. Please ask for our mixing table IP 25/IP 430. ebalta AH 150/IP 25 is suitable for infusions with a flow distance up to approx. 450 mm as well as for laminating thin and largearea laminates up to 3 mm thickness.
BCC Products
BCC Resins™ BC 8002
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Prototyping
BCC Kwik Kast II is an advanced fast cast polyurethane tooling system. BC 8002 exhibits exceptionally low viscosity, low odor and is color contrasted for uniform mix. It features low exotherm and minimal shrinkage. Kwik Kast II cures hard, yet more durable resulting in less brittle parts. Uses include; tracing models core boxes, duplicating aids, patterns, prototypes, low temperature vacuum form tools, etc.Handling Properties:BCC's Kwik Kast II is a fast-setting, two part casting system which requires careful preparation prior to mixing parts A and B. Because Kwik Kast II contains components of high density there will be some separation at the bottom of each container. Using a paint shaker, jiffy mixer, or mixing spatula, re-suspension of the ingredients is easily accomplished. Precaution should be taken to prevent any moisture contamination from containers or utensils. It is recommended that the work area be well ventilated and normal cleanliness and safety rules be observed. Avoid prolonged exposure to vapors and contact with skin.Preparation of Mold Surface:Clean the surface from dust and possible presence of moisture. Apply BC 87 Parting Agent and polish to a uniform high gloss finish (usually 2-3 coats are recommended). For plaster or wood surfaces seal with PVC sealer to ensure complete absence of moisture, followed by 2-3 coats of 87 Parting Agent.Mixing and Pouring:Although not necessary, best results are obtained by evacuation of each component under 29 inches of vacuum which removes entrapped air prior to blending the two components. Pour weighed or measured amounts of Part A & B into a separate dry container by pouring Part A into Part B. Mix with a spatula or mechanical stirrer for 30-40 seconds for quart size batches or 40-50 seconds for gallon batches while avoiding air entrapment. Immediately pour mixed resin uninterrupted from a convenient height above the mold cavity. Clean your mixing tools by rinsing in an alcohol type solvent. Larger masses (2 feet or more) may be built up with successive pours. Castings may be demolded within 60-90 minutes but should be properly supported while "green". Under normal conditions, maximum hardness or cure will be achieved in 12-18 hours.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh SG 130 LPUR 11
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Tooling, Power/Other Tools, Molds/Dies/Tools, Foundry Dressings, Modeling Material
Density:
1080.0 - 1120.0 kg/m³
Ebalta SG 130 L / PUR 11 is a Polyurethane system. Material should be carefully stirred up/ shaked before use. Filler content and sales units are on the separate mixing table noted
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh SG 130PUR 11
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Tooling, Power/Other Tools, Molds/Dies/Tools, Foundry Dressings, Modeling Material
Density:
1080.0 - 1120.0 kg/m³
This is a Polyurethane system. Material should be carefully stirred up/ shaked before use. Filler content and sales units are on the separate mixing table noted.
BCC Products
BCC Resins™ BE 290
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Lamination
End Uses:
Power/Other Tools, Molds/Dies/Tools
BE 290 is a low viscosity, medium pot life, room temperature laminating system. BE 290 features low odor, reduced toxicity and adequate working life for construction medium and large fabricating tools.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh AH 150IP 430
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Power/Other Tools, Molds/Dies/Tools, Automotive Interior Parts, Aircraft Interiors, Marine Applications, Aircraft Applications, Automotive Applications, Aerospace Applications, Automotive Exterior Parts
Flexural Strength:
123.8 - 126.2 MPa
ebalta AH 150/IP 430 is a very low-viscosity two-component epoxy resin with high strength and high dimensional stability. Due to its good soaking and wetting properties the resin/hardener mixture is suitable for infusion and laminating of solid parts with glass or carbon fibers. The hardeners IP 25, IP 55 as well as IP 430 can be mixed with each other thus reaching pot life between 10 min. and 430 min. Please ask for our mixing table IP 25/IP 430. ebalta AH 150/IP 430 is suitable for infusions with a flow distance of more than over 1000 mm as well as for laminating thin and large-area laminates up to approx. 18 mm thickness.
BCC Products
BCC Resins™ BC 8650
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting, Thermoforming
End Uses:
Power/Other Tools, Molds/Dies/Tools, Modeling Material
BC 8650 is an advanced fast cast polyurethane tooling system. BC 8650 features low viscosity, low exotherm and minimal shrinkage. Kwik Kast Blue cures hard, yet more durable resulting in less brittle parts. Designed for constructing patterns, prototypes, duplications, negatives, low temperature vacuum form tools, tracing models, etc.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh GH 760GL
Polymer Name:
Epoxy Resins & Compounds
Processing Methods:
Casting
End Uses:
Power/Other Tools, Molds/Dies/Tools, Foundry Dressings
Flexural Strength:
90.0 - 110.0 MPa
Ebalta GH 760/GL is a two-components epoxy resin, curing at room temperature, castable to 40 mm in open casting. The fine non-grinding fillers lead to good surface slip properties and mechanical workability. For this reason ebalta GH 760/GL is especially suitable for metal sheet tools as well as for foundry equipment. Due to its high strength and excellent dimensional accuracy this system is quite versatile.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh SG 2000Comp. A+B
Polymer Name:
Polyurethane (unspecified)
End Uses:
Tooling, Power/Other Tools, Molds/Dies/Tools, Foundry Dressings, Modeling Material, Mold Making, Industrial Castings
Density:
1080.0 - 1120.0 kg/m³
Ebalta SG 2000 / Comp. A+B consists of high-quality, nearly odorless two-component-Polyurethane casting resins without mixed in filler. The filler is stirred in when the components are mixed. There are different resin components available, which are processed with one hardener. The single types differ in potlife and curing time.
Ebalta Kunststoff Gmbh
Ebalta Kunststoff Gmbh SG 140PUR 12
Polymer Name:
Polyurethane (unspecified)
Processing Methods:
Casting
End Uses:
Tooling, Power/Other Tools, Molds/Dies/Tools, Foundry Dressings, Modeling Material
Density:
1030.0 - 1070.0 kg/m³
Ebalta SG 140 / PUR 12 is a Polyurethane system. Material should be carefully stirred up/ shaked before use. Filler content and sales units are on the separate mixing table noted.