Ebalta Kunststoff - SG 2000Comp. A+B - Polyurethane

Identification & Functionality

Features & Benefits

Materials Features: Filled,
High Strength,
Low Viscosity,
Thermal Shock Resistant
Properties: unfilled
very low viscosity
high filler content possible
good curing
very high strength
very heat resistant
Product Highlights: We have different resins -with one hardener- available. The various types differ in potlife and curing time:

SG 2000 S, potlife 1,5 – 2,5 minutes

SG 2000, potlife 2,5 – 3,5 minutes

SG 2000 L, potlife 7 – 8 minutes

SG 2015 potlife 14 - 18 minutes

The fast curing of the materials leads to a short demoulding time. The very thin binding agent effects a high filler content. The addition of different fillers determines the properties and strength.

Material should be carefully stirred up/ shaked before use. Filler content and delivery form are mentioned on the separate mixing table.

The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product.

Applications & Uses

Markets: Industrial
Applications: Industrial — Chemical & Industrial Manufacturing
Equipment & Parts,
Other Industrial Applications,
Tooling & Moldmaking
Plastics & Elastomers End Uses: Foundry Dressings,
Industrial Castings,
Modeling Material,
Mold Making,
Molds/Dies/Tools,
Power/Other Tools,
Tooling
Applications: Foundry patterns
Core boxes
Negatives
Control castings
Coping models
Vacuum forming tools
Mold probes for trimming of prototypes
Processing Instructions: The fillers should be stirred into the single components A and B , so that these have nearly the same viscosity. After that both components can be mixed very well.

In case of small quantities and sufficient experience it is also possible to mix the unfilled components first and then to stir in the filler, without making the potlife too short for casting.

Properties

	Value	Units	Test Method / Conditions
Shore hardness	72 ± 2	Shore A	DIN ISO 7619-1
Compressive Strength	45 ± 5	MPa	EN ISO 604
Viscosity (25°C)	50 ± 5	mPa.s	—
Flexural elongation at break	7.5 ± 0.4	%	EN ISO 178
Density (20°C)	1,10 ± 0,02	g/cm3	—
Flexural modulus	1500 ± 100	MPa	EN ISO 178
Pot Life (200g/20°C)	2,5 - 3,5	minutes	—
Flexural strength	57 ± 5	MPa	EN ISO 178
Curing time at RT	0,5 - 1	Hrs	—
Heat resistance (HDT)	86 ± 3	°C	DIN EN ISO 75 B
Flexural Strength	57 ± 5	MPa	EN ISO 178
Impact resistance (Charpy)	24 ± 4	kJ/m2	EN ISO 179
Flexural Elongation at Break	7,5 ± 0,4	%	EN ISO 178
Flexural Modulus	1500 ± 100	MPa	EN ISO 178
Impact Resistance (Charpy)	24 ± 4	kJ/m2	EN ISO 179
Heat Resistance (HDT)	86 ± 3	°C	DIN EN ISO 75 B
Shore Hardness	72 ± 2	Shore D	DIN ISO 7619-1

Packaging & Availability

Storage & Handling

Storing: Storage at room temperature 18-25 °C.

Opened containers should be closed immediately after use and should be used up as soon as possible.

Ebalta Kunststoff Gmbh SG 2000Comp. A+B