Products in Ready-to-Use Products

ELASTOSIL® RT 480 is a spreadable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is commonly used in industrial assembly and reproduction molding applications. This silicone rubber exhibits condensation-curing properties, allowing for fast curing at room temperature. It has a spreadable and self-leveling flow, making it easy to work with. ELASTOSIL® RT 480 is a two-component product that provides reliable results in various applications.

ELASTOSIL® 7750 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, and excellent tooling characteristics for construction, glass, and window building, as well as industrial applications. ELASTOSIL® 7750 N cures at room temperature in the presence of atmospheric moisture to give a permanently flexible silicone rubber.

ELASTOSIL® E11 Transparent is a flowable silicone rubber with very good mechanical properties that cures at room temperature under the influence of atmospheric moisture. Perfectly suited for lamination, coating, and thin-film potting, the material reliably fills small gaps and voids thanks to its self-leveling properties.

ELASTOSIL® A59 Grey 01 is a self-leveling, one-component, amine-cure formulation that cures at room temperature by reaction with air humidity to form a flexible and durable silicone elastomer. It is particularly suited for screen printing on gaskets. The curing rate can be accelerated by heat exposure or exposure to carbon dioxide concentrations above 1% p.b.v.

LUMISIL® 903 A/B is a low-viscosity, addition-curing two-part silicone that, when mixed in a 1:1 ratio, cures to a flexible and highly transparent silicone rubber. This flowable silicone offers rapid heat curing, and upon vulcanization, it forms a highly transparent rubber material.

WACKER® AK 300 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 300000 mm²/s. It is formulated with a special heat stabilizer that provides protection against thermal decomposition and viscosity changes. This unique feature makes WACKER® AK 300 000 STAB highly suitable for applications subjected to high temperatures and/or shear stress. The heat stabilizer ensures the stability and integrity of the silicone fluid, allowing it to maintain its desired properties under challenging conditions.

WACKER® GS - General Sanitary is a one-part, acetoxy silicone sealant specifically designed for general-purpose sealing. It is particularly suitable for sanitary applications due to its mildew-resistant properties. WACKER® GS - General Sanitary cures at room temperature in the presence of atmospheric moisture, resulting in a permanently flexible silicone rubber.

SEMICOSIL® 911 A/B is a pourable, two-part silicone rubber that cures to a soft silicone gel through addition-curing. It has a 1:1 mixing ratio and demonstrates thixotropic behavior. This product offers rapid heat curing and forms a soft gel during vulcanization. SEMICOSIL® 911 A/B has a low volatile and uncured polymer content. It maintains almost constant properties within a wide temperature range, from -40 °C to +180 °C. Additionally, it boasts a low ion content.

POWERSIL® Paste AP is an opaque to whitish paste with a medium consistency. It exhibits good values for electrical insulation, permittivity, and dielectric strength. Additionally, POWERSIL® Paste AP shows minimal swelling of silicone elastomers it comes in contact with, thanks to the utilization of a special phenyl-silicone oil.

WACKER® AK 20 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 20 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It is chemically highly unreactive, has a low solidifying point, and exhibits high heat resistance.

ELASTOSIL® RT 702 is a one-part heat-curing silicone adhesive that exhibits non-slump properties. Once cured, ELASTOSIL® RT 702 demonstrates excellent adhesion to a wide range of substrates, along with long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand constant exposure to varying climatic conditions, UV radiation, and temperatures up to 250 °C (482 °F) without sustaining any damage.

WACKER® 460 - Natural Stone is a high-quality silicone sealant specially designed for sealing natural substrates like marble. This one-part, neutral, low modulus sealant is ideal for both indoor and sanitary applications. When exposed to atmospheric moisture at room temperature, WACKER® 460 - Natural Stone undergoes curing and transforms into a permanently flexible silicone rubber.

SILRES® BS OH 100 is a solventless, ready-to-use product designed for the consolidation of construction materials. Its primary application is the restoration of weather-damaged natural stone, stucco, or frescoes. Additionally, it can be used to treat other construction materials like brick or terracotta.

WACKER® AK 0,65 is a hexamethyldisiloxane. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It exhibits good dielectric properties, low surface tension, high surface activity, and is chemically highly unreactive. Additionally, it has a low solidifying point.

ELASTOSIL® N288 is a low-viscosity, ready-to-use, neutral crosslinking silicone rubber. It cures at room temperature under the influence of atmospheric moisture. It exhibits excellent heat stability, excellent primerless adhesion to many substrates, permanent temperature exposure up to 200 °C, and peak temperatures up to 250°C.

ELASTOSIL® SC 870 A/B is a two-part silicone rubber designed for creating a thixotropic, addition-curing foam. The foam structure consists primarily of closed cells. This product is particularly well-suited for use with automatic dispensing equipment during processing. Its exceptional rheology allows for the production of CIPG foam gaskets, even in complex 3D geometries.

SILRES® BS 710 is a permanent anti-graffiti coating designed to protect concrete, masonry, wood, and pre-existing coatings. It is based on polyorganosiloxanes and provides excellent performance against exterior elements such as rain, sun, and temperature extremes. SILRES® BS 710 is a single-component product that cures at room temperature with ambient moisture. The cured coating offers excellent release properties and ease of removal for most permanent markers and aerosol paints.

ELASTOSIL® A 2000 is a one-component, thixotropic sealant intended for gasketing and sealing applications where resistance to long-life lubricants (such as hypoid gear lubricant) under harsh conditions is required. It adheres to most substrates without priming and is resistant to hot lubricating oils.

ELASTOSIL® RT 708 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is designed for potting and coating applications and can also be used as a surface adhesive when applied in a thin layer, such as through silk-screen printing. Once cured, ELASTOSIL® RT 708 exhibits excellent adhesion to various substrates and offers long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant that cures at room temperature under the influence of moisture. It is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. It exhibits good adhesion to plastics and metals, along with elasticity and durability, making it suitable for a wide range of potential uses.

ELASTOSIL® N9111 Black is a non-slump, alkoxy-cure, one-part silicone that cures at room temperature under the influence of atmospheric moisture and exhibits excellent adhesion to many substrates. Fully cured ELASTOSIL® N9111 Black has excellent flame retardant properties and shows long-term stability against weathering, moisture, and sunlight.

POWERSIL® N 553 DarkGrey is a one-component silicone dispersion that cures to form a tough, high-voltage insulator coating with excellent electrical properties. It offers very good resistance to weathering and outstanding tracking resistance. Additionally, POWERSIL® N 553 DarkGrey creates a long-term hydrophobic surface, preventing the formation of wet conductive films and reducing the risk of pollution flashovers.

ELASTOSIL® RT 705 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is primarily used for potting and coating applications but can also be used as a surface adhesive when applied in a thin layer, such as by silk-screen printing. Once cured, ELASTOSIL® RT 705 exhibits excellent adhesion to various substrates and demonstrates long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.

ELASTOSIL eco 7750 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion, a long shelf life, and excellent tooling characteristics for construction, glass, and window building, as well as industrial applications. ELASTOSIL® eco 7750 N is produced based on a 100% exchange of fossil-based raw materials for sustainably certified renewable materials. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

POWERSIL® 79032 is an electrically conductive silicone rubber dispersion in xylene. It serves as both a conductive coating and an adhesion-promoting primer. This product is supplied as a ready-to-use, one-component system, making it convenient for application. It exhibits low volume resistivity and acts as an effective adhesion promoter. POWERSIL® 79032 is suitable for various coating techniques, including dipping, brushing, and spraying.

ELASTOSIL® A234 White is a flowable RTV-1 silicone rubber that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates and offers outstanding heat stability. It is a multipurpose grade for high-temperature applications. Suitable for sealing and bonding, such as the bonding of steam chambers and sole plates of steam irons,

GENIOSIL® GF 82 is an epoxy-functional alkoxysilane. It is a clear, colorless liquid with a characteristic odor similar to gasoline. It hydrolyzes slowly in the presence of water, releasing ethanol, and forms silanols that can react with themselves to produce siloxanes or bind to inorganic substrates. The epoxy group on GENIOSIL® GF 82 can undergo a ring-opening reaction with nucleophiles such as alcohols and amines.

ELASTOSIL® 7100 P is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing and window applications, industrial applications, and sanitary areas. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

ELASTOSIL® N 2189 is a non-slump, one-part alkoxy-cure silicone sealant that cures at room temperature under the influence of moisture. It shows primerless adhesion to many substrates, in particular cast magnesium. This product also exhibits good resistance against mineral oils.

ELASTOSIL® SOLAR 1101 is a one-part, non-slump silicone adhesive that is solvent-free and non-corrosive. Upon exposure to air moisture, the adhesive cures at room temperature to produce a permanently flexible silicone rubber possessing exceptional mechanical properties. Fully cured ELASTOSIL® SOLAR 1101 exhibits exceptional long-term stability against weathering, moisture, and UV radiation, while being able to withstand constant exposure to ever-changing climatic conditions, UV radiation, and temperatures as high as 180°C (356°F) without damage.

ELASTOSIL® LR 6200 A/B is a liquid silicone rubber (LSR) that is solvent-free and free-flowing. It utilizes additive curing and consists of two components. This grade is specifically designed for textile coatings. ELASTOSIL® LR 6200 A/B has a very low viscosity, allowing for good penetration into the substrate and a dry surface touch. It is particularly well suited for textile coating applications that require enhanced flame retardancy.

WACKER® AK 50 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 50 mm²/s. Its unique chemical structure gives WACKER® AK 50 a remarkable set of properties that distinguish it from organic materials like mineral oils. These include low surface tension, resulting in high surface activity, exceptional chemical inertness, and a low solidifying point.

ELASTOSIL® RT 426 is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is commonly used in applications related to electrics and electronics, specifically for electronics encapsulation. This silicone rubber is known for its condensation-curing properties, flowability, and heat resistance. It is a two-component product that provides reliable performance in various electronic applications.

ELASTOSIL® 7000 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as industrial applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.

WACKER® GP-N - General Purpose Neutral Coloured is a one-part, neutral silicone sealant with excellent adhesion to most building substrates. It also offers good weather resistance and workability, making it ideal for glazing applications. The sealant cures at room temperature when exposed to atmospheric moisture, resulting in a permanently flexible silicone rubber.

SILRES® BS 17040 is a high-quality, water-thinnable silane emulsion that is solvent-free. It is specifically formulated to act as a water repellent for impregnating and priming alkaline mineral surfaces. Additionally, it can be used as a water-resisting admixture for non-load-bearing manufactured concrete products.