Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Products in Ready-to-Use Products
15,467 Products found in Ready-to-Use Products
Browse
Applications
Show All 6 Categories
Filters
Suppliers
Applications
Product Type
Application Area
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
POWERSIL® Shine
Product Type:
Cleaner
Certifications & Compliance:
FDA 21 CFR 175.105, BSE & TSE, Directive 2000/53/EC, Swiss Ordinance (SR 817.023.21), Directive 2011/65/EC amended through EU/2015/863 (RoHS), FDA 21 CFR 176.180, Consumer Product Safety Improvement Act (CPSIA), BfR 36/2 Recommendation , Regulation (EC) No. 1005/2009, Waste Electrical & Electronic Equipment Directive (WEEE), FDA 21 CFR 176.170, EC No. 1935/2004, BfR 36 Recommendation, FDA 21 CFR 176.200, GB 9685-2016, BfR 14 Recommendation, BfR Recommendation, FDA 21 CFR 176.210, Regulation (EU) No. 2019/1021, Coalition of Northeastern Governors (CONEG), Regulation (EU) No. 1169/2011, EU Packaging Directive (94/62/EC)
Application Area:
Electrical Components, Equipment
Features:
Equipment-friendly, Electrically Insulating, Hydrophobic, Excellent Pumpability
POWERSIL® Shine is a ready-to-use, one-component silicone-in-water emulsion. It is designed for cleaning electrical equipment and improving its surface hydrophobicity, which enhances its electrical insulating performance. The product comes in a convenient pump spray bottle, making it easy to apply. POWERSIL® Shine exhibits good cleaning behavior, does not contain solvents or abrasives, and is safe to use.
Wacker Chemie AG
DEHESIVE® PSA 847 M
Product Type:
Solventborne Adhesive, Pressure Sensitive Adhesive
Chemical Family:
Silicones
Features:
Good Weather Stability, Excellent Cure Response, High Flexibility, Good Moisture Resistance, Excellent Wetting Behaviour, Improved Ageing Resistance
DEHESIVE® PSA 847 M is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for tight adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 90-200 °C.
Wacker Chemie AG
WACKER® 180 - High Temperature
Product Type:
1K (1 component) Sealant
Compatible Substrates & Surfaces:
Aluminum, Plastics, Ceramic, Steel, Coated Surfaces, Metal, Glass, Wood
Cure Method:
Moisture Cure, Air Dry, Chemical Cure
Chemical Family:
Silicones
WACKER® 180 - High Temperature is a high-performance silicone sealant designed for applications requiring excellent heat resistance and capable of withstanding temperatures up to 250°C. This one-part acetoxy sealant cures at room temperature when exposed to atmospheric moisture, resulting in a permanently flexible silicone rubber.
Wacker Chemie AG
WACKER® E 335
Product Type:
Lubricant
Features:
Food Grade
WACKER® E 335 is a silicone emulsion of a polydimethylsiloxane fluid specifically designed for use in the food industry as a lubricant and for other specialty applications. It complies with various 21 CFR clearances, including 173.340(a) (3) [sugar beets and yeast], 175.105, 175.300, 176.170, 176.180, 176.200, 176.210, 177.1200, 177.2260, 177.2600, 177.2800, 178.3570, and 178.3910. However, it does not fall under 21 CFR 178.3400 as this code only applies to emulsifiers and surfactants. The WACKER® E 335 silicone emulsion does utilize an emulsifier in its formulation.
Wacker Chemie AG
SEMICOSIL® 942 UV A/B
Chemical Family:
Silicones
Product Type:
Potting Compound, Conformal Coating, Radiation Curable Coating, 2K (2 component) Coating, Encapsulant
Cure Method:
Radiation Cure, Air Dry, Chemical Cure
Application Area:
Electric Vehicle (EV) Batteries, Printed Circuit Boards
Application Method:
Spray
SEMICOSIL® 942 UV A/B is a sprayable, addition-curing, two-part silicone rubber with low viscosity. This product cures extremely fast when exposed to UV light, resulting in a soft conformal coating. SEMICOSIL® 942 UV A/B exhibits low viscosity and shear-thinning properties, making it suitable for spray applications. It offers the advantage of extremely fast curing at room temperature after UV activation, as well as the ability for shadow curing. Additionally, it contains a UV tracer, providing process control options during application.
Wacker Chemie AG
ADVALON® TL 88 E
Product Type:
Lubricant
Application Area:
Thread
Features:
Good Abrasion Resistance, Low Friction, Very Good Heat Resistance, Improves Stick-Slip Response
Chemical Family:
Silicones
ADVALON® TL 88 E is a 50% active exhaustible lubricant emulsion. It is a milky-white liquid that contains polydimethylsiloxane and waxes. This emulsion offers excellent abrasion resistance, a very low coefficient of friction, and excellent slip-stick properties. Additionally, it provides increased heat resistance.
Wacker Chemie AG
ELASTOSIL® N 2137
Product Type:
1K (1 component) Sealant
Application Area:
Form In Plastic Gaskets (FIPG), Gaskets
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® N 2137 is a non-slump, one-part silicone rubber for sealing and bonding applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with excellent heat resistance. Fully vulcanized ELASTOSIL® N 2137 shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180 °C (356 °F) without damage.
Wacker Chemie AG
VINNAPAS® 224 HD
Functions:
Binder, Binder & Resin
Chemical Family:
Styrenics, Acrylics & Acrylates, Styrene-Acrylic Copolymer
Product Type:
Primer, 1K (1 component) Coating
Compatible Substrates & Surfaces:
Concrete
VINNAPAS® 224 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.
Wacker Chemie AG
DEHESIVE® PSA 845 T
Product Type:
Solventborne Adhesive, Pressure Sensitive Adhesive
Chemical Family:
Silicones
Features:
Good Weather Stability, Excellent Cure Response, High Flexibility, Good Moisture Resistance, Excellent Wetting Behaviour, Improved Ageing Resistance
DEHESIVE® PSA 845 T is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for tight adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 90-200 °C.
Wacker Chemie AG
SEMICOSIL® 9672 TC
Application Area:
Power Control Unit (PCU), Electric Vehicle (EV) Batteries, Sensors
Features:
Tacky, Bleed Resistant, Low Density, Soft, Good Thermal Conductivity, Low Volatility
Chemical Family:
Silicones
SEMICOSIL® 9672 TC is a thermally conductive gap filler silicone material designed for heat sink applications in the electronics industry. It is a shear-thinning, non-slump, two-part silicone gel that cures at room temperature to a soft gel with excellent thermal conductivity.
Wacker Chemie AG
ELASTOSIL® SC 833 A/B
Foam Type:
Closed Cell Foam, 2K System
Density:
480.0 - 480.0 kg/m³
Chemical Family:
Silicones
End Uses:
Automotive Interior Trim
Physical Form:
Foam
ELASTOSIL® SC 833 A/B is a pourable, addition-curing, two-component silicone rubber that forms a predominantly closed-cell foam. ELASTOSIL® SC 833 A/B exhibits excellent flame resistance and is self-extinguishing. This product is commonly used in applications such as automotive, aerospace, and railway industries.
Wacker Chemie AG
VINNAPAS® UW 10 FS
Chemical Family:
Polyvinyl Acetates (PVA), Vinyls, Vinylics & Vinyl Derivatives
Product Type:
Solventborne Adhesive
Compatible Substrates & Surfaces:
Composites, Wood
VINNAPAS® UW 10 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless. Typical applications for VINNAPAS® UW 10 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.
Wacker Chemie AG
GENIOSIL® WP 1
Functions:
Binder, Binder & Resin
Chemical Family:
Silane-Terminated Polyether (STPE)
Product Type:
Primer, Potting Compound, Encapsulant
Cure Method:
Moisture Cure
Application Method:
Spray, Roller
GENIOSIL® WP 1 is a polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity, which results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.
Wacker Chemie AG
WACKER® 120 - Food Contact
Product Type:
1K (1 component) Adhesive, Solvent free (100% Solids) Sealant
Compatible Substrates & Surfaces:
Glass, Wood, Plastics, Ceramic, Coated Surfaces
Cure Method:
Air Dry, Chemical Cure, Moisture Cure
Chemical Family:
Silicones
WACKER® 120 - Food Contact is a high-performance silicone sealant specifically designed for sealing joints in food-contact applications. This one-part, acetoxy sealant offers excellent performance and reliability. When exposed to atmospheric moisture at room temperature, WACKER® 120 - Food Contact undergoes curing, transforming into a permanently flexible silicone rubber.
Wacker Chemie AG
ELASTOSIL® E60 N Black
Product Type:
Encapsulant, 1K (1 component) Sealant, Potting Compound
Application Area:
Cooking Appliances, White Goods
Cure Method:
Air Dry, Moisture Cure
Chemical Family:
Silicones
ELASTOSIL® E60 N Black is a flowable, one-part silicone rubber for potting and coating applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with excellent heat resistance. Fully vulcanized ELASTOSIL® E60 N Black shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 230 °C without damage.
Wacker Chemie AG
WACKER® G 795
Product Type:
Primer
Compatible Substrates & Surfaces:
Elastomers & Rubbers
Features:
Excellent Substrate Adhesion, Good Rigidity
Chemical Family:
Silicones, Siloxanes
WACKER® G 795 is a solution consisting of reactive siloxanes and silicone resins dissolved in a blend of isoalkanes. When the solvent evaporates, the remaining mixture forms a rigid film of silicone resin upon exposure to ambient or elevated temperatures and atmospheric humidity. This resin film firmly adheres to the substrate. Subsequently, when catalyzed silicone rubber is applied and vulcanized on top of the resin film, it forms a strong bond.
Wacker Chemie AG
SEMICOSIL® 9671 TC2 A/B
Application Area:
Power Control Unit (PCU), Electric Vehicle (EV) Batteries, Sensors
Features:
Low Stress, Tacky, Bleed Resistant, Thermally Conductive, Low Density, Soft, Good Thermal Conductivity, Low Volatility
Chemical Family:
Silicones
SEMICOSIL® 9671 TC2 A/B is a thermal conductive gap filler silicone material used in heat sink applications for the electronics industry. It is a shear-thinning, easy-dispensing, non-slump, addition-curing, two-part silicone rubber that cures at room temperature. This material is specifically designed to enhance heat dissipation and provide efficient thermal management in electronic devices. SEMICOSIL® 9671 TC2 A/B is ideal for filling gaps and ensuring effective heat transfer in heat sink applications.
Wacker Chemie AG
Wacker Chemie Primer FMP HC
Product Type:
Primer
Features:
High Rigidity, Excellent Substrate Adhesion
Application Method:
Brush, Spray, Dip Coating
Chemical Family:
Silanes
Wacker Chemie Primer FMP HC is a solution of reactive silanes in a mixture of isoalkanes. After the solvent evaporates, exposure to atmospheric humidity at ambient or elevated temperature leads to the formation of a rigid film of silicone resin that firmly adheres to the substrate. The catalyzed silicone rubber applied on top forms a tight bond with this resin film during vulcanization.
Wacker Chemie AG
SILRES® BS 1803 A
Product Type:
Concrete Admixture, Sealer
Application Method:
Roller, Brush, Spray
SILRES® BS 1803 A is a stable and VOC-compliant silicone emulsion with a 60% active content. It is specifically designed to reduce water uptake and create visual beading on concrete substrates while allowing the pores and capillaries to remain unblocked. This product is particularly effective when it comes to preventing water uptake and promoting beads, even at very low addition levels. One of the main applications of SILRES® BS 1803 A is as an admixture for non-load bearing cement-based formulated products, including precast products, blocks, and pavers. By incorporating this emulsion into the formulation, the resulting products gain enhanced waterproofing properties and resistance to water penetration. Furthermore, SILRES® BS 1803 A can also be used as a topical sealer for post-treatment of cement-based formulated products.
Wacker Chemie AG
SILRES® BS 290
Chemical Family:
Silanes, Siloxanes
Functions:
Binder & Resin
Product Type:
Primer, Solventless & High Solids Coating
Compatible Substrates & Surfaces:
Marble, Concrete, Stone, Masonry, Brick, Painted Surfaces
SILRES® BS 290 is a solventless silicone concentrate based on a mixture of silane and siloxane. It can be diluted with organic solvents. Dilute solutions of SILRES® BS 290 in organic solvents are high-quality general-purpose water repellents for impregnating and priming mineral and highly alkaline substrates.
Wacker Chemie AG
SILRES® IC 701
Product Type:
Coating
Features:
Water Resistant, Anti-graffiti, Excellent Substrate Adhesion, Good Release Properties, Air Drying, Good Weather Stability
Compatible Substrates & Surfaces:
Concrete, Metal
Application Method:
Spray
Chemical Family:
Silicones, Siloxanes
SILRES® IC 701 is an anti-graffiti coating intended for use in the professional market for the protection of concrete, masonry, and metal substrates. The cured coating provides excellent release and ease of removal for permanent markers and aerosol paints. SILRES® IC 701 is based on polysiloxane polymers and provides excellent performance against exterior elements such as rain, sun, and temperature extremes. It cures via the condensation reaction at room temperature by reacting with ambient moisture.
Wacker Chemie AG
ELASTOSIL® RT 624 A/B
Product Type:
2K (2 component) Sealant
Application Area:
Gaskets
Cure Method:
Heat Cure, Air Dry, Chemical Cure
ELASTOSIL® RT 624 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is commonly used for bonding and sealing applications as well as for creating cured-in-place gaskets of the dry type. This product is known for its high tear resistance and long pot life at ambient temperature.
Wacker Chemie AG
WACKER® GM - Glazing and Metal
Product Type:
1K (1 component) Sealant
Application Area:
Sanitary Wares
Compatible Substrates & Surfaces:
Metal
Cure Method:
Chemical Cure
Chemical Family:
Silicones
WACKER® GM - Glazing and Metal is a one-part, neutral-curing, low modulus silicone sealant with excellent adhesion and a long shelf life. It is designed for sealing, bonding, and repairing various tasks. WACKER® GM - Glazing and Metal cures at room temperature when exposed to atmospheric moisture, forming a durable and flexible silicone rubber.
Wacker Chemie AG
POWERSIL® Insulator Finish
Product Type:
1K (1 component) Sealant
Application Area:
Bushings, Housing
Cure Method:
Chemical Cure, Moisture Cure, Air Dry
Chemical Family:
Silicones
POWERSIL® Insulator Finish is a self-leveling, one-component silicone rubber that cures at room temperature under the influence of moisture in the air. This elastomer exhibits good mechanical properties and very good electrical properties, making it suitable for insulating applications. It utilizes an acetic acid-curing system and demonstrates excellent resistance to weathering and air pollution.
Wacker Chemie AG
SILRES® BS 1001 A
Product Type:
Primer
Compatible Substrates & Surfaces:
Concrete, Brick
Features:
Good Stability, Blister Resistance, Excellent UV Stability, Excellent Aesthetics, Cost Effective, Low VOC, Long Shelf Life, Excellent Dirt Pick-up Resistance, Freeze/Thaw Stability, Crack Resistant, Vapor Permeable, Good Adhesion, Prevents Thermo-Oxidative Degradation, Microbe Resistant, Peel Resistance, Chemical Resistant, Efflorescence Control, Cleanable, Water Resistant, High Durability
Chemical Family:
Silicones
SILRES® BS 1001 A is a stable, VOC-compliant, 50% active silicone emulsion that reduces with water to form a stable, penetrating water repellent emulsion. SILRES® BS 1001 A is developed to treat a wide variety of mineral substrates, including architectural concrete, concrete block, split-face block, pavers, stucco, porous and dense brick, clay tile, and exposed aggregate concrete. It is particularly effective in the do-it-yourself (DIY) markets, where good water repellency, beading, ease of use, and stability are required. SILRES® BS 1001 A is not recommended for below-grade applications where hydrostatic pressure can be significant.
Wacker Chemie AG
DEHESIVE® PSA 765 KR
Product Type:
Solvent free (100% Solids) Adhesive, Solventborne Adhesive, Pressure Sensitive Adhesive
Chemical Family:
Silicones
Features:
Good Weather Stability, Excellent Cure Response, High Flexibility, Good Moisture Resistance, Excellent Wetting Behaviour, Improved Ageing Resistance
DEHESIVE® PSA 765 KR is a solvent-free, addition-curing silicone pressure-sensitive adhesive designed for low adhesion levels. It serves as a general-purpose adhesive, primarily intended for coating films but also suitable for other substrates. This product utilizes a thermal-curing system and achieves curing at a web temperature range of 100-200 °C.
Wacker Chemie AG
ELASTOSIL® E60 N Grey
Product Type:
Encapsulant, 1K (1 component) Sealant, Potting Compound
Application Area:
Cooking Appliances, White Goods
Cure Method:
Air Dry, Moisture Cure
Chemical Family:
Silicones
ELASTOSIL® E60 N Grey is a flowable, one-part silicone rubber for potting and coating applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with excellent heat resistance. Fully vulcanized ELASTOSIL® E60 N Grey shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C without damage.
Wacker Chemie AG
SEMICOSIL® 949 UV A/B
Chemical Family:
Silicones
Product Type:
Potting Compound, Conformal Coating, Radiation Curable Coating, 2K (2 component) Adhesive, 2K (2 component) Coating, Encapsulant
Cure Method:
Chemical Cure, Heat Cure, Radiation Cure, Air Dry
Application Area:
Housing, Electrical Components, Power Control Unit (PCU), Sensors, Electronic Control Unit (ECU)
Application Method:
Spray
SEMICOSIL® 949 UV A/B is a pourable, addition-curing, two-part silicone rubber with low viscosity. This product cures extremely fast when exposed to UV light, resulting in a soft silicone elastomer. SEMICOSIL® 949 UV A has a mixing ratio of 10:1 for its two parts and exhibits low viscosity, making it easy to handle and process. It offers the advantage of extremely fast curing at room temperature after UV activation. The cured elastomer has low hardness (Shore 00). Additionally, SEMICOSIL® 949 UV A contains a UV tracer, providing process control options during application.
Wacker Chemie AG
SILRES® BS 16040
Product Type:
Primer, Waterborne Coating, Solventless & High Solids Coating
Application Area:
Bridges
Compatible Substrates & Surfaces:
Concrete
Features:
Water-based, Low Volatility, Excellent Substrate Adhesion, High Capacity of Penetration, Long Shelf Life, High Durability, Freeze/Thaw Stability, Alkali Resistant
Chemical Family:
Silanes
SILRES® BS 16040 is a water-dilutable, solvent-free silane emulsion. It is a high-quality specialty product used for the hydrophobic impregnation and priming of alkaline substrates. When applied to construction materials, SILRES® BS 16040 reacts with atmospheric moisture and/or water present in the pores of the building material. This reaction eliminates alcohol and forms an active substance that greatly reduces the absorbency of the concrete within the active zone (penetration depth after post-treatment). Importantly, this reduction in absorbency occurs without blocking any pores or capillaries in the material. As a result of the impregnation, the treated building material retains its high water-vapor permeability, allowing moisture to pass through while still providing excellent protection against water penetration.
Wacker Chemie AG
VINNAPAS® 202 HD
Functions:
Binder, Binder & Resin
Chemical Family:
Styrenics, Acrylics & Acrylates, Styrene-Acrylic Copolymer
Product Type:
Primer, 1K (1 component) Coating
Compatible Substrates & Surfaces:
Concrete
VINNAPAS® 202 HD is a multi-purpose construction dispersion for liquid and paste with cement-free binder technology, specifically suited for primers, ready-to-use tile adhesives, and one-component dispersion-based water-proofing membranes. It is based on a hard copolymer of styrene and acrylate and belongs to the product class VINNAPAS® HD, which means that it provides a remarkable hydrophobic effect in addition to excellent adhesion even under wet conditions.
Wacker Chemie AG
ELASTOSIL® RT 625 A/B
Polymer Name:
Silicone Elastomer
Chemical Family:
Silicones
Product Type:
2K (2 component) Sealant, Potting Compound, Encapsulant, 2K (2 component) Coating
Cure Method:
Heat Cure, Air Dry, Chemical Cure
ELASTOSIL® RT 625 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is specifically designed for electronics reproduction molding applications. This product offers excellent mechanical properties and is flowable in nature. It is a two-component system that provides high-quality reproduction molding results.
Wacker Chemie AG
SEMICOSIL® 950 UV B
Product Type:
Potting Compound, Radiation Curable Coating, 2K (2 component) Adhesive, Encapsulant
Application Area:
Power Control Unit (PCU), Sensors, Electronic Control Unit (ECU), Printed Circuit Boards, Connectors
Cure Method:
Chemical Cure, Radiation Cure, Air Dry
Application Method:
Spray
Chemical Family:
Silicones
SEMICOSIL® 950 UV B is used in combination with SEMICOSIL® 949 UV A as a sprayable, addition-curing, 2-part silicone rubber of low viscosity that cures extremely fast after activation by UV light exposure to a soft silicone elastomer. The applied mixture offers a process control option by UV light (it contains a UV tracer).
Wacker Chemie AG
SILPURAN® 2100 A/B
Product Type:
2K (2 component) Adhesive, Adhesive
Application Area:
Medical Applications, Adhesive Plaster
Compatible Substrates & Surfaces:
Stainless Steel, Metal
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SILPURAN® 2100 A/B is a two-component, addition-curing silicone composition that cures to a soft silicone adhesive. It belongs to the silicone gel category. SILPURAN® 2100 A/B can be used as a skin adhesive in medical applications. It has good adhesive properties that can be adjusted to suit specific requirements. Increasing the proportion of component A results in a softer vulcanizate and increased tackiness.
Wacker Chemie AG
VINNAPAS® UW 25 FS
Chemical Family:
Polyvinyl Acetates (PVA), Vinyls, Vinylics & Vinyl Derivatives
Product Type:
Solventborne Adhesive
Compatible Substrates & Surfaces:
Composites, Wood
VINNAPAS® UW 25 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless and finds application in building and construction adhesives, as well as resin modification for composites. The product is available in the form of solid, colorless beads that are odorless and tasteless.
Wacker Chemie AG
ELASTOSIL® RT 624 "4S" A/B VS
Product Type:
2K (2 component) Sealant
Application Area:
Gaskets
Cure Method:
Heat Cure, Air Dry, Chemical Cure
ELASTOSIL® RT 624 "4S" A/B VS is a pourable, two-component thermal curing silicone specifically designed for fuel cell sealing applications. It features addition curing and offers excellent bonding and sealing capabilities, making it suitable for use in various applications such as cured-in-place gaskets (dry type) and fuel cells.
Wacker Chemie AG
WACKER® HC 100
Features:
Chemical Resistant, High Durability, Water Resistant, Low VOC, Freeze/Thaw Stability, Peel Resistance, Efflorescence Control, Microbe Resistant, Good Stability, Prevents Thermo-Oxidative Degradation, Crack Resistant, Good Adhesion, Vapor Permeable, Excellent Dirt Pick-up Resistance, Excellent Aesthetics, Long Shelf Life, Blister Resistance, Cost Effective, Excellent UV Stability, Cleanable
Compatible Substrates & Surfaces:
Concrete, Brick, Clay
Chemical Family:
Silicones
WACKER® HC 100 is a stable, VOC-compliant silicone emulsion with 50% actives. It can be diluted with water to create stable and penetrating water repellent emulsions. WACKER® HC 100 is specifically designed for treating various mineral substrates, such as architectural concrete, concrete block, splitface block, pavers, stucco, porous and dense brick, clay tile, and exposed aggregate concrete. This product is particularly effective in the Do-It-Yourself (DIY) market, where there is a need for good water repellency, beading, ease of use, and stability. However, it is not recommended for below-grade applications where there may be significant hydrostatic pressure.
Show
36
of 15,467 results
Go to page
1
2
3
4
5
6
7
8
9
10